Analysis of Vicinal Water in Soft Contact Lenses Using a Combination of Infrared Absorption Spectroscopy and Multivariate Curve Resolution

In this paper, we propose a new spectroscopic method to explore the behavior of molecules near polymeric molecular networks of water-containing soft materials such as hydrogels. We demonstrate the analysis of hydrogen bonding states of water in the vicinity of hydrogels (soft contact lenses). In this method, we apply force to hydrated contact lenses to deform them and to modulate the ratio between the signals from bulk and vicinal regions. We then collect spectra at different forces. Finally, we extracted the spectra of the vicinal region using the multivariate curve resolution-alternating least square (MCR-ALS) method. We report the hydration states depending on the chemical structures of hydrogels constituting the contact lenses.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

超疏水涂膜的研究进展

超疏水涂膜以其独特的性能,在国防、工农业生产和日常生活中有着广泛的应用前景。但目前的制备技术制约了其在建筑外墙涂料等大型设施方面的应用。探索如何采用简单有效的方法构造和调控涂膜的双微观结构,从而获得性能持久优异的超疏水性涂膜,并有效应用于生产和生活的各个方面是这一领域研究的最终目标。本文就超疏水材料表面理论的发展和近几年来超疏水膜制备技术取得的新成果进行了概括,并指出制备超疏水涂膜存在的问题和发展方向。利用表面能极低的含氟材料,将溶胶－凝胶、相分离技术和自组装梯度功能等技术有机结合,获得适宜的表面粗糙度和微观构造,是实现超疏水涂膜工业化生产的可行途径。     

Quantification of particle-bubble interactions using atomic force microscopy: A review

The attachment of particles to bubbles in solution is of fundamental importance to several industrial processes, most notably in the process of froth flotation. During this process hydrophobic particles attach to air bubbles in solution, which allows them to be separated as froth at the surface. The addition of chemicals can help to modulate these interactions to increase the yield of the minerals of interest. Over the past decade the atomic force microscope (AFM) has been adapted for use in studying the forces involved in the attachment of single particles to bubbles in the laboratory. This allows the measurement of actual DLVO (Derjaguin, Landau, Vervey and Overbeek) forces and adhesive contacts to be measured under different conditions. In addition contact angles may be calculated from features of force versus distance curves. It is the purpose of this article to illustrate how the colloid probe technique can be used to make single particle-bubble interactions and to summarise the current literature describing such experiments.     

苯乙烯/甲基丙烯酸和苯乙烯/甲基丙烯酸(β-羟丙酯)嵌段共聚物的表面动态行为

通过测定表面动态接触角研究了两亲性的苯乙烯／甲基丙烯酸嵌段共聚物（ＰＳ ｂ ＰＭＡＡ）和苯乙烯／甲基丙烯酸（β 羟丙酯）嵌段共聚物（ＰＳ ｂ ＰＨＰＭＡ）的表面动态行为及温度、嵌段长度比等因素对其值的影响,讨论了聚合物表面当接触介质改变时链段或基团的再取向行为和表面性质     

多壁碳纳米管固相萃取-高效液相色谱-串联质谱法测定食品接触材料中双酚-二环氧甘油醚的迁移量

建立了测定食品接触材料中6种双酚-二环氧甘油醚(双酚A二缩水甘油醚(BADGE)及其衍生物双酚A(2,3-二羟丙基)甘油醚(BADGE•H2O)、双酚A(3-氯-2-羟丙基)甘油醚(BADGE•HCl)、双酚A(3-氯-2-羟丙基)(2,3-二羟丙基)醚(BADGE•H2O•HCl)和双酚F二缩水甘油醚(BFDGE)及其衍生物双酚F双(3-氯-2-羟丙基)甘油醚(BFDGE•2HCl))迁移到食品中的迁移量的高效液相色谱-串联质谱法(HPLC-MS/MS)。样品以叔丁基甲醚(MTBE)为提取溶剂,超声提取,提取液经多壁碳纳米管(MWCNTs)固相萃取(SPE)柱富集、净化。以COSMOSIL C18为分析柱,流动相为0.1%甲酸的5 mmol/L醋酸铵溶液和甲醇。6种双酚-二环氧甘油醚在1.0～100 μg/L范围内线性关系良好(r2＞0.9991)。在3个添加水平下,6种目标化合物的回收率范围为78.6%～89.9%,相对标准偏差小于10%。方法检出限范围为0.5～1.5 μg/L。该方法操作简单,灵敏度高,可应用于食品接触材料中双酚-二环氧甘油醚迁移量的快速检测。     

低温等离子体引发聚氨酯脲接枝聚氧乙烯和肝素的研究

合成了以4,4’-二环己基甲烷二异氰酸酯（HMDI）和乙二胺（EDA）为硬段、聚碳酸六亚甲基酯二醇（PHC）为软段的聚酯型聚氨酯脲（PUU）,并用聚氧乙烯和肝素（heparin）对其进行了表面改性。通过红外光谱、X射线光电子能谱、接触角等研究了PUU材料的表面结构和性能。实验结果表明,利用室温等离子体方法,成功在PUU...     

高效液相色谱法检测食品接触产品中的三聚氰胺及其衍生物的迁移量

建立了高效液相色谱同时检测三聚氰胺(MEL)及其衍生物——三聚氰酸二酰胺(ANE)、三聚氰酸一酰胺(ADE)和三聚氰酸(CYA)单体迁移量的方法.样品分别采用水、4％乙酸、10％乙醇作为食品模拟物,在70℃浸泡4h,浸泡液过0.45μm微孔薄膜后进入色谱柱.色谱分离采用Luna NH2柱,柱温:30℃,流动相为V(乙腈...     

高效液相色谱法测定食品接触材料中苯酚和4-叔丁基苯酚迁移量

提出了食品接触材料在水、3％(质量分数)乙酸溶液、乙醇(1+9)溶液、异辛烷4种食品模拟物中苯酚、4-叔丁基苯酚迁移量的高效液相色谱测定方法.不同种类的食品模拟物采用不同的样品前处理方法提取后,用Diamonsil C18色谱柱为固定相,甲醇-水为流动相梯度洗脱,以激发波长220 nm、发射波长312nm的荧光检测器进...     

长中半径水平井钻柱接触摩擦阻力分析

用整体钻柱静力模型和间隙元法,分析了长中半径水平井钻柱的接触非线性问题,算出了钻柱与井壁接触摩擦阻力的分布,为水平井井眼轨道设计和施工提供了重要参数。