近对称谐振腔的变换圆图解分析

利用传播圆-变换圆图解分析方法，通过对不同结构谐振腔的分析和对比，得出一种宜于推广的自锁模激光谐振腔——近对称谐振腔，其锁模运转易于启动且工作性能比较稳定；通过实验对近对称腔的工作性能进行了验证，并对一种五镜锁模腔进行了分析。五镜腔实质上等价于近对称四镜腔。     

激光微角偏移测试系统研究

针对火炮出厂前的校瞄工作存在自动化程度不高、测试结果分辨率和精度低的缺点,设计了一种新型激光微角偏移测试校瞄系统。该系统由位置灵敏探测器(PSD)、准直平行激光管与二维精密旋转控制器构成。采用光电转换和信号处理技术,可实时获取火炮身管轴线的微角偏移量;利用相对简单的方法完成了高精度的测试,有效地改善了传统校瞄方法的不足。实验测试结果表明,该系统可在炮管仰角0°~70°范围内全程测试微角偏移量,其分辨率可达到0.001°,可广泛应用于不同口径火炮身管轴线的校瞄工作中。     

基于PSD的风洞模型姿态角光学测量技术研究

开发了一种基于光电探测技术的风洞模型姿态角光学测量技术,实现了对姿态角的精确、实时、非接触测量。对激光探测头、模拟试验平台进行了优化设计,编写了功能齐全的实验软件,模拟了风洞试验运行实况,深入开展了一维和二维角度测量实验和分辨率测试实验。实验结果表明,该技术可对模型变化角度进行实时精确测量,测量范围达到了-10°～10°,测量精密度为0.0023°,测量准确度为0.0026°,分辨率可达到0.001°。该光学测量技术在风洞模型的角度测量和振动测量实验中切实可行,为测量风洞试验模型的姿态及振动提供了一种简洁有效的测量方法。     

Auger-electron-ion coincidence study of photon-stimulated ion desorption for condensed acetonitrile

Auger-electron-photoion coincidence (AEPICO) studies of photon-stimulated ion desorption (PSID) for condensed acetonitrile induced by carbon core excitation have been performed to elucidate the desorption mechanism related to the Auger process. We have detected only the H⁺ ion in AEPICO spectra. The total ion yield spectrum divided by the total electron yield shows that the desorption efficiency is largely increased at the resonant excitation to C---H*. We have also measured the Auger electron spectrum and the AEPICO yield spectrum at the C---H* excitation. The AEPICO yield spectrum shows enhancement at 245–250 eV electron energy. This seems to be related to the spectator resonant Auger stimulated ion desorption. That is, H⁺ desorption is enhanced due to a two-hole-one-electron state at which the electron is in an anti-bonding C---H* orbital and the two holes can be in a 1π bonding orbital localized on the ---CH₃ group. We have also measured similar spectra for other resonant excitation (π*_CN, σ*_CC, σ*_CN). The results are discussed in connection with the bonding/anti-bonding character and localized character of the excited state.     

Characterization of PSD of activated carbons by using slit and triangular pore geometries

A mixed geometry model for activated carbons, representing the porous space as a collection of an undetermined proportion of slit and triangular pores, is developed, evaluated theoretically and applied to the characterization of a controlled series of samples of activated carbon obtained from the same precursor material. A method is proposed for the determination of the Pore Size Distribution (PSD) for such a mixed geometry model, leading to the unique determination of the proportion of pores of the two geometries fitting adsorption data. By using the Grand Canonical Monte Carlo (GCMC) simulation method in the continuum space, families of N2 adsorption isotherms are generated both for slit and triangular geometry corresponding to different pore sizes. The problem of the uniqueness in the determination of the PSD by fitting an adsorption isotherm using the mixed geometry model is then discussed and the effects of the addition of triangular pores on the PSD are analyzed by performing a test where the adsorption isotherm corresponding to the known PSD is generated and used as the “experimental” isotherm. It is found that a pure slit geometry model would widen the PSD and shift it to smaller sizes, whereas a pure triangular geometry model would produce the opposite effect. The slit and triangular geometry families of isotherms are finally used to the fit experimental N₂ adsorption data corresponding to a family of activated carbons obtained from coconut shells through a one-step chemical activation process with phosphoric acid in air, allowing for the determination of the micropore volume, the proportion of slit and triangular pores and the PSD corresponding to the mixed geometry. The same experimental data were fit using both the conventional slit pore model and the mixed geometry model. From the analysis of the effect of different preparation procedures on the resulting PSDs, it is concluded that the proposed mixed geometry model may probably better capture the morphology and energetics of activated carbons prepared by chemical activation under mild temperatures.     

切削参数对KDP晶体加工表面实际频率特征的影响

针对采用单点金刚石超精加工的KDP晶体光学表面,研究了切削参数对微观形貌频率特征的影响。通过功率谱密度获得表面轮廓频率分布,并用连续小波重构加工过程中随切削用量变化的微观轮廓频率特征。结果表明：切削参数对微观形貌的影响具体表现在实际频率特征上,中频特征波长及幅值反映了切深及转速变化,随切深及转速增加,幅值变大;低频特征反映了进给量变化,随着进给量变小,频率及幅值变小;高频特征是加工过程中振动及材料各向异性的具体表现。     

X‐ray position‐sensitive duo‐lateral diamond detectors at SOLEIL

The performance of a diamond X‐ray beam position monitor is reported. This detector consists of an ionization solid‐state chamber based on a thin single‐crystal chemical‐vapour‐deposition diamond with position‐sensitive resistive electrodes in a duo‐lateral configuration. The detector's linearity, homogeneity and responsivity were studied on beamlines at Synchrotron SOLEIL with various beam sizes, intensities and energies. These measurements demonstrate the large and homogeneous (absorption variation of less than 0.7% over 500 µm × 500 µm) active area of the detector, with linear responses independent of the X‐ray beam spatial distribution. Due to the excellent charge collection efficiency (approaching 100%) and intensity sensitivity (0.05%), the detector allows monitoring of the incident beam flux precisely. In addition, the in‐beam position resolution was compared with a theoretical analysis providing an estimation of the detector's beam position resolution capability depending on the experimental conditions (X‐ray flux, energy and readout acquisition time).     

安装蜂窝板动力学特性分析及主动控制试验研究

通过对蜂窝芯的等效化处理,建立了ANSYS的壳单元模型,并作有限元模态分析,然后与其试验模态分析结果比较,有限元分析结果和试验结果基本一致。通过ANSYS的PSD随机功率谱分析和模态分析所得振型确定了贴片位置,对蜂窝板进行了压电智能结构振动主动控制试验研究,得到了较好的振动抑制效果。分析结果为仪器安装蜂窝板的设计和实现智能结构控制提供了重要参考依据。     

Particle Size Distribution by Combined Elastic Light Scattering and Turbidity Measurements. A Novel Method to Estimate the Required Normalization Factor

Turbidity (T) and Elastic Light Scattering (ELS) measurements can be combined to estimate the particle size distribution (PSD) of a polymer latex. To this effect a “normalization factor” must be employed to adequately scale both measurements. In a real application, such factor is a priori unknown, and it must be estimated for determining the PSD. In a previous publication, a method was proposed to simultaneously estimate the normalization factor and the PSD by solving an inverse nonlinear problem. In this work, a simpler technique is presented which estimates the normalization factor and the PSD by sequentially solving two inverse linear problems. To evaluate the proposed technique, a synthetic example based on a polystyrene latex sample with a bimodal PSD was solved. It is shown that, for slight noise measurements, the errors in the estimation of the normalization factor are quite small and have a low effect on the PSD recovery.     

消除与WLAN同频干扰的UWB正交成形脉冲序列设计

提出了产生避免与WLAN同频干扰的UWB正交成形脉冲序列方法,并到了期望的正交成形脉冲序列.仿真结果表明,利用这种方法产生的UWB瞬时成形脉冲的功率谱密度分布符合FCC频谱规定的要求,具有很高的频谱利用率,既可以降低用户间干扰,又解决了UWB与窄带系统同频干扰的问题,可以提高系统的发射功率.