Factors affecting the nodule size of asymmetric PMMA membranes

Several factors that may affect the surface nodule size of a polymeric membrane were under investigation. The increase of polymer concentration and molecular weight were found to increase the surface nodule size. The increase of casting temperature also resulted in an increase in nodule size. These results supported that the radius of gyration and the collision frequency between polymer chains were the key factors affecting the nodule size. However, when the radius of gyration was reduced by the use of a poor solvent or by pre-adding nonsolvent in the casting solution, the surface nodule size increased. It suggested that there existed other factors affecting the nodule size on membrane surface besides the gyration radius and the collision frequency of polymer chains. In this study, we found in most cases that the surface nodule size decreased along with the surface tension difference between the casting solution and the coagulant. To demonstrate the effect of surface tension, we examined the nodule size inside the membranes where the nodule formation was not significantly affected by the interfacial tension. Opposite to what was observed on the surface, the nodule size increased with the solvation power of the solvent. This result suggested that it was the interfacial tension that overpowered the gyration radius in affecting the surface nodule size.     

Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends

The miscibility, morphology, and thermal properties of poly(vinyl chloride) (PVC) blends with different concentrations of poly(methyl methacylate) (PMMA) have been studied. The interaction between the phases was studied by FTIR and by measuring the glass transition temperature (T_g) of the blends using differential scanning calorimetry. Distribution of the phases at different compositions was studied through scanning electron microscopy. The FTIR and SEM results show little interaction and gross phase separation. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of the first and second stage of degradation in PVC in the presence of PMMA were higher than the pure. The stabilization effect on PVC was found most significant with 10 wt% PMMA content in the PVC matrix. These results agree with the isothermal degradation studies using dehydrochlorination and UV-vis spectroscopic results carried out on these blends. Using multiple heating rate kinetics the activation energies of the degradation process in PVC and its blends have been reported.     

双[N,O]配体合镍催化剂/MAO催化MMA聚合的研究

合成了双[水杨醛(对硝基苯)亚胺]合镍催化剂A和双[水杨醛(对甲氧基苯)亚胺]合镍催化剂B.该两种双[N,O]配体合镍配合物/MAO催化体系能有效地催化极性单体甲基丙烯酸甲酯(MMA)聚合,催化活性可高达105gPMMA/(molNi.h).其中配体对位含有硝基吸电子(共轭)效应的催化剂A/MAO体系有相对较高的聚合反应热稳定性,温度达50℃时仍具有高催化活性.配体对位含有甲氧基推电子(共轭)效应的催化剂B/MAO则在30℃和Al/Ni摩尔比为600时表现出最高的催化活性.催化剂B/MAO体系催化得到PMMA的链序列结构以间规为主(含高达73.2%rr三元组),具有较高的玻璃化转变温度(Tg=106.4℃).     

Effect of Nanoclay on the Phase Separation Behavior of Poly（methyl methacrylate）/Poly（vinyl acetate） Binary Polymer Blends

The effect of nanoclay on the phase-separation behavior of poly（methyl methacrylate）/poly（vinyl acetate）（PMMA/PVAc） blends has been mainly investigated by small-angle laser light scattering. It is found that the effect of clay on the thermodynamics and kinetics of phase-separation for PMMA/PVAc blends seems inconsistent. The kinetics phaseseparation rate decreases, while the thermodynamics parameters, cloud points Tc and delay time tD of isothermal phaseseparation also decrease, and the variation amplitude depends on the matrix composition. The affinity of clay to PMMA results in the composition difference between the border layer and the polymer matrix and further causes the concentration fluctuation at the early stage of phase separation to reduce Tc and tD. On the other hand, the decrease of phase-separation rate is caused by the mechanical barrier effect of clay on the macromolecular diffusion of blend matrix. Hence, such seemingly counterintuitive results on the thermodynamics and kinetics of phase-separation are attributed to different dominant factors.     

Study of thermal aging effect on space charge in poly(methyl methacrylate)

Charges evolution in poly(methyl methacrylate) (PMMA) samples under thermal aging effect has been studied by means of two complementary techniques, thermal step method (TSM) and thermally stimulated depolarization current (TSDC). For the first method, measurements reveal that injected charges, whose quantity is found depending on the number of applied temperature cycles, remain close to the surface sample. TSDC measurements have been carried out for different temperatures ranging from 25 °C to 140 °C. Three distinguishable dipolar relaxations (β₁, β₂ and α) have been highlighted. In the same way, the presence of polarization and injected charges has been confirmed. In support of electric characterization, X-ray reflectometry has been used. The obtained results equally emphasized the thermal aging effect on the material.     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

用含偶氮基的聚苯乙烯大分子引发剂合成两亲性嵌段共聚物

采用含偶氮基的聚苯乙烯预聚物（ＰＳ ＡＣＰＣ）作为引发剂，合成了苯乙烯（Ｓｔ）分别与甲基丙烯酸（ＭＡＡ）、甲基丙烯酸（β 羟丙酯）（ＨＰＭＡ）的嵌段共聚物，考察了ＰＳ ＡＣＰＣ引发第二单体的聚合反应行为，以及影响第二单体转化率和均聚物含量、共聚物组成的因素．用溶解性、凝胶渗透色谱（ＧＰＣ）、红外光谱（ＩＲ）、核磁共振（ＮＭＲ）、动态接触角（ＤＣＡ）等表征了嵌段共聚物．     

相容的聚甲基丙烯酸甲酯/[C12 MIM][PF6]离子液体体系在超临界CO2中的发泡性能

通过快速卸压法, 以超临界CO2为物理发泡剂, 研究了相容的聚甲基丙烯酸甲酯(PMMA)/1-n-十二烷基-3-甲基咪唑六氟磷酸盐([C12 MIM][PF6])离子液体(IL)复合体系的发泡性能. 加入IL后, PMMA对CO2的吸收量增加; 复合体系的玻璃化转变温度(Tg)随IL含量的增加而降低. IL对PMMA发泡行为的影响取决于发泡条件. 在较低温度和压力下, 纯PMMA无法发泡, IL的加入可促进泡孔形成; 提高温度和压力, 纯PMMA可以发泡, IL的加入在提高泡孔尺寸的同时使泡孔仍然保持尺寸分布均匀的微米级结构.     

Synthesis and characterization of chitosan‐modified polymethyl methacrylate latex particles

Stable chitosan‐modified polymethyl methacrylate (PMMA) latex particles were prepared by using 2,2′‐azobis(2‐amidinopropane) dihydrochloride (V‐50) as the cationic initiator. The polymerization rate (R_p) is controlled by the V‐50 concentration ([V‐50]) and R_p is less sensitive to the chitosan concentration ([C]) used in the synthesis work. The reaction system follows Smith–Ewart Case III kinetics due to the relatively large particles produced. The zeta potential data show that the isoelectric point (pI) of the latex particles is 10.7. The amounts of V‐50 (C_V‐50) and chitosan (C_c) ultimately incorporated into the particles correlate reasonably well with [V‐50] and [C], respectively. At pH 7, the quantity of the negatively charged bovine serum albumin (BSA, pI = 4.8) adsorbed on the positively charged chitosan‐free particles (Q) via the electrostatic interaction increases with increasing C_V‐50. However, Q is relatively insensitive to changes in C_c. This result implies that only the outermost region of the hairy chitosan‐modified particles is available for adsorption of the relatively large protein species. Colloidal stability shows a significant influence on the BSA adsorption process. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1489–1499, 1999     

SYNTHESIS AND PROPERTIES OF POLYSTYRENE／LAPONITE NANOCOMPOSITES

Exfoliated polystyrene (PS)/laponite nanocomposites were prepared successfully. The characteristic doo1 diffraction peak of organo-laponite disappeared in the XRD patterns of nanocomposites, indicating that the laponite layers were exfoliated and the ordered crystal structure of laponite was destroyed because of the styrene polymerization. TEM observations showed that the exfoliated laponite primary particles were dispersed randomly in the PS matrix with lateral dimensions from 1 nm to 10 rim. SEM results showed that the PS/laponite nanocomposite particles were almost monodispersed spheres with the size of about 120 rim. Because of the interaction between PS and laponite nanolayers, the nanocomposites exhibited higher thermal stability and glass transition temperature when compared to pure PS.