双[N,O]配体合镍催化剂/MAO催化MMA聚合的研究

合成了双[水杨醛(对硝基苯)亚胺]合镍催化剂A和双[水杨醛(对甲氧基苯)亚胺]合镍催化剂B.该两种双[N,O]配体合镍配合物/MAO催化体系能有效地催化极性单体甲基丙烯酸甲酯(MMA)聚合,催化活性可高达105gPMMA/(molNi.h).其中配体对位含有硝基吸电子(共轭)效应的催化剂A/MAO体系有相对较高的聚合反应热稳定性,温度达50℃时仍具有高催化活性.配体对位含有甲氧基推电子(共轭)效应的催化剂B/MAO则在30℃和Al/Ni摩尔比为600时表现出最高的催化活性.催化剂B/MAO体系催化得到PMMA的链序列结构以间规为主(含高达73.2%rr三元组),具有较高的玻璃化转变温度(Tg=106.4℃).     

Light induced refractive index changes in PMMA films doped with styrene

Solutions of poly(methyl methacrylate) in styrene are used to produce thin polymer films (1m–20m) saturated with styrene monomer. In the illuminated areas refractive index changes up to 10^–2 are achieved by photoinduced polymerisation. The index patterns may be fixed by annealing treatments removing the residual monomer.We thank P. Hertel, M. Kopietz, M. D. Lechner and D. Steinmeier for valuable discussions. Financial support of the Stiftung Volkswagenwerk is gratefully acknowledged.     

窄分布聚甲基丙烯酸甲酯的合成与表征

甲基丙烯酸甲酯(MMA)的阴离子聚合,由于其聚合反应的特殊性和复杂性,早就引起人们的关注。长期以来,在各种引发剂、溶剂和温度等条件下都做了大量的研究。其中有关窄分布聚甲基丙烯酸甲酯(PMMA)合成方面的研究甚少。Anderson等用     

聚甲基丙烯酸甲酯单分子膜的原子力学显微镜研究

报道了利用原子力显微镜（ＡＦＭ）技术对聚甲基丙烯酸甲酯（ＰＭＭＡ）单分子膜进行分子结构水平的观察研究．由ＡＰＭ图像中得到的ＰＭＭＡ单体所占面积与用π－Ａ曲线中换算出液面上ＰＭＭＡＬａｕｇｍｕｉｒ膜中单体的面积符合得很好．从ＡＦＭ图像中可见ＰＭＭＡＬＢ膜中ＰＭＭＡ的线型碳链是与档板（ｂａｒｒｉｅｒ）平行的紧密排列，与ＬＢ提膜方向相垂直．并由此对ＰＭＭＡＬＢ膜的形成过程进行分析．此外，还观察到了在Ｓｉ基底上ＰＭＭＡ直链的卷绕伸直排列形态，初步分析了其形成原因．     

Optimum conditions for preparing micron-sized PMMA beads in the dispersion polymerization using PVA

The optimum conditions for preparing micron-sized monodisperse polymethylmethacrylate (PMMA) beads by dispersion polymerization in a methanol/water mixture were proposed. PMMA forming microspheres having an average molecular weight of 55,300 g/mol, 2.6 μm weight-average diameter, with a 5.3% coefficient of variation and 91% conversion, were successfully obtained in the presence of 15 wt.% of polyvinylalcohol (PVA), 100/50 (g/g) of MeOH/water mixtures at 70°C; the reaction lasted for 8 h. Compared to dispersion polymerization using polyvinylpirrolydone, PVA proved to be an extremely stable steric stabilizer in the dispersion polymerization of methylmethacrylate.     

烷基硫酸钠对MMA种子乳液聚合的影响

研究了烷基硫酸钠纯度，烷基碳链分布对甲基丙烯酸甲酯种子乳液聚合反应的影响。结果表明，烷基硫酸钠中乙醇不溶物含量的增加，可提高ＭＭＡ乳液聚合反应速度，在采用Ｋ２Ｓ２Ｏ８－ＮａＨＳＯ３－Ｃｕ＾２＋三元氧化－还原引发体系的ＭＭＡ乳液聚合中，Ｆｅ＾２＋降低反应速率，而Ｆｅ＾３＋则提高聚合反应速率；     

Efficiency of radiation-induced main-chain scission of poly (methyl methacrylate) depends on the irradiation temperature because of coexisting monomer

Effect of irradiation temperature on the main-chain scission of poly (methyl methacrylate) (PMMA) caused by γ-irradiation was studied by means of gel permeation chromatography and ESR spectroscopy. Although no temperature dependency was observed on the scission efficiency for purified PMMA, the efficiency for crude or monomer-doped purified PMMA was decreased by decreasing the temperature below ca. 200 K. Above 200 K the efficiency was constant and did not depend on the purity of PMMA. ESR study of the irradiated PMMA revealed that the suppression of the scission below 200 K is induced by the addition of methyl methacrylate monomer to primary radical species, which otherwise cause the main-chain scission by warming the polymer above 200 K. The primary radical generated above 200 K immediately converts to the scission-type ? CH₂ ? ?(CH₃) COOCH₃ radical through the β-scission of the polymer main chain, so that the efficiency of the scission does not depend on both the impurity and the irradiation temperature. © 1994 John Wiley & Sons, Inc.     

Block balance in hydrogenated polybutadiene‐b‐polymethylmethacrylate diblock copolymer for efficient interfacial activity in low‐density polyethylene/polymethylmethacrylate blend: Phase morphology development

The objective of the present study was to determine the best molecular balance between the two hydrogenated polybutadiene (HPB) and polymethylmethacrylate (PMMA) blocks that promotes an HPB‐b‐PMMA diblock copolymer with efficient compatibilization activity in a low‐density polyethylene (LDPE)/PMMA immiscible blend. The model blend selected, LDPE/PMMA, is “more immiscible” than the LDPE/polystyrene pair largely reported in open literature. The blends having a composition of 80LDPE/20PMMA exhibit a droplet‐in‐matrix phase morphology whereas in 20LDPE/80PMMA a co‐continuous phase morphology was developed. In the droplet‐in‐matrix phase morphology, the emulsifying efficiency of the copolymer was evaluated based on the maximum reduction of the PMMA droplet size it is able to promote. Whereas, in the co‐continuous phase morphology, the copolymer was evaluated based on its ability to stabilize the maximum phase co‐continuity. The sequences of the best emulsifying copolymer revealed are not symmetrical. An HPB‐b‐PMMA where the ratio of molar mass of the blocks, _HPB/ _PMMA, is within 1.8–1.95 exhibits a much better interfacial activity in LDPE/PMMA blends than a copolymer of much lower ratio (longer PMMA block). This is ascribed to the much higher interactions (cohesive energy density) encountered in PMMA (PMMA of the copolymer and PMMA phase of the blend) compared with the LDPE side (HPB of the copolymer and LDPE phase of the blend). © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 837–848, 2005     

从溶胀平衡研究玻璃态高聚物的凝聚缠结网络

在13~15℃室温条件下对聚苯乙烯(PS)颗粒在二氧六环/水混合溶剂中的溶胀情况进行目视观察,可以看到,当减小混合溶剂二氧六环/水中的水含量时,PS颗粒从玻璃态到溶胀的玻璃态、溶胀的高弹态、流体态的转变,与PS颗粒升温时从玻璃态到高弹态、流体态的转变相对应.选定混合溶剂二氧六环/水(水6·8wt%)对一个单分散PS试样(Mw=1·68×105)在30℃进行分相平衡和溶胀平衡的测定.分相平衡是先将PS/二氧六环/水(混合溶剂水含量6·8wt%)体系加热到130℃使PS溶解成一均相溶液,然后在冷却过程中分相,在30℃达分相平衡(30天)时,浓相高分子体积浓度p″=0·304,稀相几乎为纯溶剂.从Flory-Huggins相平衡理论得出此体系的高分子-溶剂相互作用参数χ=0·63.本工作使用的单分散PS试样在选定的混合溶剂,即二氧六环/水(水6·8wt%)中,30℃时不能溶解只能溶胀,单分散PS颗粒淬冷试样(密度ρp=1·0451g/mL)到达溶胀平衡(80天)时浓相高分子体积浓度p″=0·308.而此淬冷试样经在80℃热处理100h后的老化试样(ρp=1·0470g/mL)达溶胀平衡(70天)时p″=0·312.从溶胀过程中浓相体积变化曲线可知试样经在80℃热处理过程中凝聚网络趋向于更均一,更接近热处理温度下的平衡态,试样密度增大,网络产生了新的链间凝聚,物理交联密度增大(凝聚点间分子量减小).从溶胀平衡理论并取χ=0·63(分相平衡)可得到淬冷试样的物理交联点间分子量Mc=11·6×104,老化试样的物理交联点间分子量Mc=6·9×104.实验结果说明溶胀过程及溶胀平衡的测定可以反映玻璃态高聚物中的凝聚网络结构的细节,而且非常敏感.     

Preparation and Characterization of Three-dimensionally Ordered Crystalline Macroporous CeO2

Three-dimensional ordered macroporous (3DOM) materials are of great potential importance in catalysis, selective separation, sensor arrays and communications with optical band gaps1. Many results in the synthesis of 3DOM materials have been reported, such as closed-packed silica spheres or polystyrenes (PS) templating routes for silica2, metal oxides1-6 and metals7. Recently, poly(methyl methacrylate) (PMMA) colloidal crystal templates have been used to prepare 3DOM materials of metals8,…