掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

Waveguides induced by grey screening solitons

We investigate the properties of waveguides induced by one-dimensional grey screening solitons in biased photorefractive crystals. The results show that waveguides induced by grey screening solitons are always of single mode for all intensity ratios, i.e. the ratios between the peak intensity of the soliton and the dark irradiance. Our analysis indicates that the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton increase monotonically with intensity ratio increasing. On the other hand, when the soliton greyness increases, the energy confined near the centre of the grey soliton and the propagation constant of the guided mode of the waveguide induced by the grey screening soliton decrease monotonically. Relevant examples are provided where photorefractive crystal is of the strontium barium niobate type.     

IMPROVED GENERALIZED ADMITTANCE MATRIX TECHNIQUE AND ITS APPLICATIONS TO RIGOROUS ANALYSIS OF MILLIMETER-WAVE DEVICES IN RECTANGULAR WAVEGUIDE

An improved generalized admittance (GAM) matrix technique is presented in this paper. Matrix transformation eliminates the singularity factor of GAM, denominator (1+Γ), because of new presentations of GAM. The relationship equations between II-port current and I-port incidence wave is computed by mode matching method. The generalized scattering matrix (GSM) of waveguide structure and its discontinuity problems is obtained with relationship equations and reflection coefficients. The GSM’s of millimeter-wave multistepped bend and T-junction in rectangular waveguide are computed by the improved GAM technique. The results comparisons between the proposed method and commercial software HFSS10.0 show the validity of the proposed method, which improves the validity of the GAM technique and reduces mathematical efforts. It is general, very efficient and can be used to solve other complicated and multiport network problems.     

阵列波导光栅波分复用/解复用器光谱响应效率的理论模型

基于单模光波导的本征模场分布,瑞利－索末菲衍射积分公式和天线原理的互易定理,给出耦合器中两个非接触平面光波导耦合特性的描述.基此,根据等光程差不等振幅多光束干涉的光场叠加原理,推导出新颖的阵列波导光栅波分复用/解复用器的光谱响应效率的解析函数表达式,这些表达式可为快速精确分析阵列波导光栅波分复用/解复用器的特性提供理论基础.同时,介绍了一个计算阵列波导光栅波分复用/解复用器特性的例子,给出其光谱响应度和信号通道串扰.     

转移矩阵法在负折射率介质材料平板波导中的应用研究

利用严格电磁理论,推导出了适用于负折射率介质材料光波导的转移矩阵,分析讨论了转移矩阵的性质和应用.利用转移矩阵方法,推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模,最低阶为1阶模,并且有截止频率,只有波导参量满足一定条件的时候才会存在,导模的横向波数可以为实数和纯虚数,而正折射率介质波导导模的横向波数只能为实数.     

DIELECTRIC EFFECT ON THE RADIO-FREQUENCY CHARACTERISTICS OF A RECTANGULAR WAVEGUIDE GRATING TRAVELING WAVE TUBE

A new type of partial-dielectric-loaded rectangular waveguide grating slow-wave structure (SWS) for millimeter wave traveling wave tube (TWT) is presented in this paper. The radio-frequency characteristics including the dispersion properties, the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analyzed. The results show that the dispersion of the rectangular waveguide grating circuit is weakened, the phase velocity is reduced and the position of the maximum E _z is basically invariant after partially filling the dielectric materials in the rectangular waveguide grating SWS. Although the coupling impedance decreases a little, it still keeps above 40 Ω.     

带有增益介质层的混合脊状等离子体波导的传输特性

在传统脊状等离子体波导的基础上设计了一种带有增益介质层的新型混合脊状等离子体波导,其结构中的介质层部分包含两个区域:前区为单一介质,后区的脊是由2种介质构成的双层脊区。采用二维时域有限差分方法分析了波导结构的传输特性,得到了TM模下的电场分布图,并对输出功率以及传输损耗与结构参数和介质折射率的变化规律进行了讨论。结果表明,在波导中引入的增益介质材料磷化铟后其损耗达到-6 dB/μm。此种波导结构对于光集成芯片的研究与制作具有重要意义。     

2.45 GHz ECR离子源的微波阻抗匹配

ECR离子源的等离子体阻抗对其微波传输与阻抗匹配设计至关重要。在中国科学院近代物理研究所现有的2.45 GHz ECR 质子源上,对等离子体阻抗进行了测量。首先用水吸收负载代替等离子体负载测量得到了所用微波窗阻抗,然后根据质子源测量数据,推算得到了等离子体阻抗。实验结果表明,脊波导输出端阻抗与后续负载不完全匹配,等离子体阻抗随微波功率变化呈非线性。这些结果为ECR离子源过渡匹配和微波窗的设计提供了参考依据。Plasma impedance of an ECR ion source is important for microwave transmission and impedance matching design. Plasma impedance was measured indirectly with the 2.45 GHz ECR proton source at the Institute of Modern Physics, Chinese Academy of Sciences. In the test, we got microwave window mpedance by using water absorption load instead of plasma load, and the source plasma impedance was derived from the test data with the 2.45 GHz ECR proton source and microwave window impedance. The experimental results show that ridge waveguide output impedance and the subsequent load does not exactly match, plasma impedance variation is nonlinear with microwave power. The achievedresult is useful in the design of ridged waveguide and microwave window.     

高功率毫米波圆波导TM01—TE11模式变换分析

 在数值研究高功率毫米波TM₀₁—TE₁₁光滑弯曲圆波导模式变换的基础上，对弯曲波导的几何结构进行了优化分析。在模式耦合理论的基础上，优化出了比较好的几何结构，并发现了圆波导半径、弯曲圆波导曲率和频率以及频带宽度之间的变化规律。以此数据设计的模式变换器的转换效率可达99%，带宽超过29.8%。