Nanostructure formation in polymer thin films influenced by humidity

The influence of relative humidity (RH) during the film preparation on the surface morphology and on the material distribution of the resulting technical polymer blend films consisting of poly (methyl methacrylate) (PMMA) and poly (vinyl butyral) (PVB) is investigated by atomic force microscopy. Both pure polymers and polymer blends with different compositions of PVB/PMMA dissolved in tetrahydrofuran (THF) were used. Polymer films prepared under dry conditions (RH < 20%) are compared with those that have the same polymer composition but were prepared under increased humidity conditions (RH > 80%). The films consisting of the pure polymers showed a nonporous surface morphology for low‐humidity preparation conditions, whereas high‐humidity preparation conditions lead to porous PVB and PMMA films, respectively. These pores are explained as the result of a breath figure formation. In the case of the polymer blend films containing both polymers, porous or phase‐separated surface structures were observed even at low‐humidity conditions. A superposition of the effects of phase separation and breath figure formation is observed in the case of polymer blend films prepared under high‐humidity conditions. Atomic force microscopy (AFM) images taken before and after the treatment with ethanol as a selective solvent for PVB indicate that PMMA is deposited on top of a PVB layer in the case of the low‐humidity preparation process whereas for high‐humidity conditions the silicon substrate is covered with a PMMA film. Copyright © 2006 John Wiley & Sons, Ltd.     

Selective Hg2+ sensor performance based various carbon‐nanofillers into CuO‐PMMA nanocomposites

Ternary nanocomposites (NCs) containing copper oxide (CuO)/poly(methyl methacrylate)/various carbon‐based nanofillers have been successfully prepared as thin films by an ex situ method as a selective Hg⁺² sensor. The structural, morphological, and electrochemical properties of the NCs were identified by all common characterization tools. The FT‐IR curves of these NCs proved the efficiency of CuO mixed with single‐walled CNTs (CuO/SWCNTs), multi‐walled CNTs (CuO/MWCNTs), or graphene (CuO/G) nanoparticles in the PMMA polymer matrix. The mixed nanofillers significantly improved the properties of the PMMA film. The thermal characteristics of the pure PMMA polymer matrix were highly developed by adding nanofillers in the form of NCs. The maximum composite degradation temperature (CDT_max) values were comparable for all the NCs and were in the range of 345 to 406°C. For fabrication, the CuO‐PMMA‐SWCNT, CuO‐PMMA‐MWCNT, and CuO‐PMMA‐GNCs were coated onto a glassy carbon electrode (GCE) to form a tiny layer with orderly thickness using a conductive 5% Nafion chemical binder. During the electrochemical investigation, it was found that CuO‐PMMA‐SWCNT had the maximum response toward Hg²⁺ ions compared to the other nanofillers in a buffer medium (phosphate type). To calibrate the Hg²⁺ ionic sensor, the data were plotted against Hg²⁺ ion concentration and the proposed sensor showed linearity over a wide range of concentrations (0.1‐0.01 mM), which is called the linear dynamic range (LDR). The analytical parameters, such as sensitivity (1.70 × 102 μAμM^‐1 cm^?2), detection limit (55.76 ± 2.79 pM), and limit of quantification (185.87 pM) were calculated from the calibration curve. Moreover, it showed good reproducibility, fast response time, good linearity, large LDR, and good stability. The CuO‐PMMA‐SWCNT NC‐modified GCE offers a new route to fabricate novel heavy metal ionic sensors, which might be used in green environment and health development applications.     

Chemical modification of polymeric microchip devices

Analytical polymeric microchips in both fluidic and array formats offer short analysis times, coupling of many sample processing and chemical reaction steps on one platform with minimal sample and reagent consumption, as well as low cost, minimal fabrication times and disposability. However, the invariable bulk properties of most commercial polymers have driven researchers to develop new modification strategies. This article critically reviews the scope and development of chemical modifications of such polymeric chips since 2003. Surface modifications were based on chemical derivatization or activation of surface layers with reagent solutions, reactive gases and irradiation. Bulk modification of polymer chips used newly incorporation of monomers with selective chemical functionalities throughout the bulk polymer material and integrated the chip modification and fabrication into a single step. Such modifications hold a great promise for establishing a true ‘lab-on-chip’ as can be seen from many novel applications for modulating electroosmosis, suppressing protein adsorption in microchip capillary electrophoretic separations, extraction of analytes and for zone-specific binding of enzymes and other biomolecules.     

Effect of LiCF3SO3 on L-Chitosan/PMMA Blend Polymer Electrolytes

This paper focuses on the effect of lithium triflate (LiCF₃SO₃) on the structural and conduction properties of lauroyl (L)-chitosan/poly(metylmethacryalate) (PMMA)-based polymer electrolytes. Films of L-chitosan/PMMA blends and its complexes were prepared using a solution-casting technique. The ionic conductivity of the system was measured over a wide range of frequency between 50 Hz-1 MHz. Impedance plot for the samples demonstrates two well-defined regions. The disappearance of the high frequency semicircular region led to a conclusion that the current carriers are ions. Sample with 30 wt% of LiCF₃SO₃ showed the highest conductivity of 7.59 ± 3.64 × 10^?4 Scm^?1 at room temperature. This is consistent with the results obtained from infrared spectroscopy.     

Optimal design for extending the lifetime of thin film luminescent solar concentrators

This study is concerned with the enhancement of the molecular, weathering stability of two models of thin film luminescent solar concentrators (LSCs). Two model systems of thin film LSCs had been proposed; the first model consists of a transparent PMMA/SiO₂ nanohybrid layer coated on a coumarin doped PMMA substrate. The second model designed as the ordinary configuration in which coumarin dye is dissolved in PMMA/SiO₂ nanohybrid layer then coated on a transparent PMMA substrate. The effect of nanosilica concentration on the prepared models was studied by TEM, SEM, DSC, FT-IR, UV–vis absorption and indoor photodegradation test. The obtained results suggested the first model for a durable design of thin film LSC applications specially in hot regions.     

Transparent nano composite PVA–TiO2 and PMMA–TiO2 thin films: Optical and dielectric properties

Transparent nano composite PVA–TiO₂ and PMMA–TiO₂ thin films were prepared by an easy and cost effective dip coating method. Al/PVA–TiO₂/Al and Al/PMMA–TiO₂/Al sandwich structures were prepared to study the dielectric behavior. The presence of metal–oxide (Ti–O) bond in the prepared films was confirmed by Fourier transform infrared spectroscopy. X-ray diffraction pattern indicated that the prepared films were predominantly amorphous in nature. Scanning electron micrographs showed cluster of TiO₂ nanoparticles distributed over the film surface and also there were no cracks and pin holes on the surface. The transmittance of the films was above 80% in the visible region and the optical band gap was estimated to be about 3.77 eV and 3.78 eV respectively for PVA–TiO₂ and PMMA–TiO₂ films by using Tauc's plot. The determined refractive index (n) values were between 1.6 and 2.3. High value of dielectric constant (?′ = 24.6 and ?′ = 26.8) was obtained for the prepared composite films. The conduction in the composite films was found to be due to electrons. The observed amorphous structure, good optical properties and dielectric behavior of the prepared nano composite thin films indicated that these films could be used in opto-electronic devices and in thin film transistors.     

Multistep manipulations of poly(methyl‐methacrylate) submicron particles using dielectrophoresis

A microfluidic chip for multistep manipulations of PMMA submicron particles (PMMA‐SMPs) based on dielectrophoresis (DEP) has been developed that includes four main functions of focusing, guiding, trapping, and releasing the SMPs. The structure of the DEP chip consists of a top electrode made of indium tin oxide, a flow chamber formed by optically clear adhesive tape and bottom electrodes with different patterns for different purposes. The bottom electrodes can be divided into three parts: a fish‐bone‐type electrode array that provides the positive DEP force for focusing the suspended nanoparticles (NPs) near the inlet in the flow chamber; the second is for switching and guiding the focused NPs along the electrode surface to the target area, like a flow passing along a virtual channel; and a trapping electrode in the downstream for trapping and releasing the guided NPs. According to the simulation and experimental results, NPs can be aligned along the electrode of the focusing electrode and guided toward the target electrode by means of a positive DEP force between the top and bottom electrodes, with the effects of Brownian motion and Stokes force. In order to demonstrate the sequence of DEP manipulations, a PMMA‐NP suspension is introduced to the DEP chip; the size of the PMMA‐SMPs is about 300 nm. Furthermore, a LabVIEW program developed for sequence control of the AC signals for the multistep manipulations. Consequently, the DEP chip provides an excellent platform technology for the multistep manipulation of SMPs.     

低聚合度的交替共聚物太阳能电池的形态和性能

制备了由低聚合度的聚[2,6-(4,4-双-(2-乙基己基)-4H-环戊[2,1-b;3,4-b']双噻吩)-交替-4,7-(2,1,3-苯并噻二唑)](LDP-PCPDTBT)、[6,6]-苯基-C61-丁酸甲酯(PC61BM)和聚甲基丙烯酸甲酯(PMMA)组成的三组分共混薄膜,并通过加入溶剂添加剂(1,8-二溴辛烷,DBO)对体系进行了优化处理.研究发现,没有加入DBO时,LDP-PCPDTBT和PC61BM相在PMMA的基质中分别是无定形的和结晶的;加入DBO后,PMMA基质中LDP-PCPDTBT和PC61BM间的相分离过程得到优化,有机太阳能电池的能量转换效率相应提高了32.4%.     

Capillary zone electrophoresis and capillary electrophoresis-mass spectrometry for analyzing qualitative and quantitative variations in therapeutic albumin

The present study describes a reproducible and quantitative capillary zone electrophoresis (CZE) method, which leads to the separation of nine forms (native, oxidized and glycated) of human serum albumin (HSA). In an attempt to identify the different species separated by this CZE method, the capillary electrophoresis was coupled to mass spectrometry using a sheath liquid interface, an optimized capillary coating and a suitable CE running buffer. CE-MS analyses confirmed the heterogeneity of albumin preparation and revealed new truncated and modified forms such as Advanced Glycation End products (AGEs). Assignment of the CZE peaks was carried out using specific antibodies, carboxypeptidase A or sample reduction before or during the CE separation. Thus, five HSA forms were unambiguously identified. Using this CZE method several albumin batches produced by slightly different fractionation ways could be discriminated. Furthermore, analyses of HSA preparations marketed by five pharmaceutical industries revealed that two therapeutic albumins, including that marketed by LFB, contained the highest proportion of native form and lower levels of oxidized forms.     

Thermal and Morphological Studies on Poly(Methyl Methacrylate)/Thermoplastic Polyurethane Blends

Poly(methyl methacrylate) (PMMA) and thermoplastic polyurethane (TPU) blends in different compositions viz., 95/05, 90/10, 85/15 and 80/20 (by wt/wt% of PMMA/TPU) have been prepared by melt mixing using a twin screw extruder. The thermal stability of these blends has been characterized by thermogravimetric (TG) analysis. All the blends are stable up to 381°C and complete degradation occurs at 488°C. A slight improvement in thermal stability was noticed with an increase in TPU content in the blends. Surface morphology of the blends has been studied by an optical microscope. Optical microphotographs revealed two‐phase morphology for all the blends.