多孔硅在30~180℃温区光致发光谱的研究

对长期存放在空气中的多孔硅样品和即时制备的多孔硅样品分别在室温~180℃下进行了光致发光（PL）温度效应的研究.两类样品的PL呈现不同的变化规律.前者的PL还表现为双峰,且长波PL峰随温度升高蓝移;后者的PL表现为单峰,且PL峰位随温度升高红移.基于量子限制效应对后者进行了解释;而前者难以用分立的量子限制和表面发光中心模型来解释,实验结果表明两种机制之间可能有较复杂的耦合效应发生.     

黄鳝DEAD-box家族PL10基因的克隆与序列分析

通过PCR克隆的方法，从黄鳝(Monopterus albus)中得到两个PL10基因的cDNA片段Mo PL10A和Mo PL10B，长度均为1．127kb，推测其编码375个氨基酸的蛋白片段．结合其他PL10类同源物序列，对这两条cDNA进行了分析和初步的功能推测．根据此片段的氨基酸序列构建的系统发育树与形态分类结果一致．在不同组织中的RT—PCR结果表明Mo PL10A和Mo PL10B的mRNA在各组织中的分布有差异．     

Implementing the ALGOL 68 heap

The implications of the heap, reference variables and global generators in ALGOL 68 are examined and some notes on possible implementation mechanisms are presented. In particular the use or simulation of hardware with segment addressing facilities is discussed.     

Elastic and inertial effects in pulsatile flow of polymeric liquids in circular tubes

In the earlier theoretical work of Barnes, Townsend, and Walters on pulsatile flow of viscoelastic fluids, it was found that an Oldroyd model predicted that flow enhancement should decrease with increasing frequency of pulsation, whereas their experimental data showed an increase. Their calculations have been repeated for the Goddard—Miller model using two different expressions for the relaxation modulus; it is found that the Goddard—Miller model leads to the same discrepancy between theory and experiment. It is tentatively concluded that secondary-flow effects are playing an important role. The role of the elastic and inertial effects and the role of the shape of the viscosity vs. shear rate curve are discussed.     

The Ackermann function. a theoretical,computational, and formula manipulative study

Ackermann's function is of highly recursive nature and of two arguments. It is here treated as a class of functions of one argument, where the other argument defines the member of the class. The first members are expressed with elementary functions, the higher members with a hierarchy of primitive recursive functions. The number of calls of the function needed in a straightforward recursive computation is given for the first members. The maximum depth in the recursion during the evaluation is investigated.Results from tests with the Ackermann function of recursive procedure implementations in ALGOL-60, ALGOL W, PL/I and SIMULA-67 on IBM 360/75 and CD 6600 are given.A SYMBAL formula manipulating program, that automatically solves recurrence relations for the first members of the function class and for the number of calls needed in their straightforward computation, is given.The Ackermann rating of programming languages is discussed.     

Li掺杂ZnO纳米棒的导电和发光特性(英文)

利用气相输运方法,在(111)面硅衬底上制备了名义上原子数分数为2%的Li掺杂的ZnO纳米棒(样品A)。作为比较,我们在相同的生长条件下制备了没有任何掺杂的ZnO纳米棒(样品B)。XRD分析测试表明:样品A和样品B中的ZnO纳米棒具有纤锌矿六边形结构,没有其他氧化物,例如Li2O。Hall效应测量表明:样品A导电类型为p型,空穴载流子浓度为6.72×1016cm-3,空穴载流子迁移率为2.46 cm2.V-1.s-1。样品B为n型,电子载流子浓度为7.16×1018cm-3,电子载流子迁移率为4.73 cm2.V-1.s-1。低温光致发光光谱测试表明,样品A和样品B发光峰明显的区别是位于3.351 eV(样品B)和3.364 eV(样品A)处。根据文献报道,在没有掺杂的ZnO中,3.364 eV发光峰源于施主束缚激子发光。通过变温光致发光光谱的测试,证明了在样品A中,位于3.351 eV的发光峰源于受主束缚激子发光,其光学受主能级位于价带顶142meV处。     

In_(0.2)Ga_(0.8)As/GaAs单量子阱PL谱温度特性及其机制

测量了不同阱宽In0.2Ga0.8As/GaAs单量子阱的PL谱的峰值波长和荧光谱线半峰全宽随温度的变化。利用Varshni公式对实验峰值波长进行拟合,得到了新的参数。结果表明,无位错应变量子阱带隙仍具有其体材料的特性:荧光谱线半峰全宽随温度升高迅速展宽,这主要归因于声子关联作用增强和激子热离化为自由载流子所致;阱宽越窄荧光峰值能量越高,将其与量子尺寸效应的理论计算结果进行了比较。文中还考察了谱线半峰全宽和阱宽的关系,利用合金无序对这一现象进行了解释。     

多层GaSb(QDs)/GaAs生长中量子点的聚集及发光特性

通过对多层GaSb量子点的生长研究,发现随着生长层数的增加,量子点尺寸逐渐变大,密度没有明显变化,并且量子点出现了聚集现象;当层数增加到一定数量、量子点聚集到一定大小时,聚集的量子点处会出现空洞。这些现象表明,各层量子点在生长过程中存在关联效应,并且GaAs层不能很好地覆盖在聚集的量子点之上,在继续生长其它量子点层时,聚集的量子点处在高温下出现GaSb的蒸发,从而出现空洞。PL谱出现了很宽的量子点发光峰,这很可能是由于多层量子点在生长时大小分布较宽而导致的结果。     

Improvement of photoluminescence mechanism of CTA-treated Si-implanted SiO2 films by using RTA

In this paper, a shift in the photoluminescence (PL) peak from blue to near-infrared region was observed in the Si⁺-implanted 400-nm-thick SiO₂ films with the rapid thermal annealing (RTA) method only. As the Si⁺-fluence was 1×10¹⁶ ions/cm², a blue band was observed in the films after RTA at 1050 °C for 5 s in dry-N₂ atmosphere; then, the band shifted from blue to orange upon increasing the holding temperature of RTA to 1250 °C in the films after the isochronal RTA in dry N₂. Furthermore, while the fluence was increased to 3×110¹⁶ ions/cm² and the holding temperature was at the same range between 1050 and 1250 °C, the PL peak occurred between red and near-infrared regions. Although the RTA and conventional thermal annealing (CTA) methods produce a similar mechanism, the CTA method needs a much longer annealing-time and a higher Si⁺-implanted dose than the RTA method for producing the same shift and intensity of PL peak from the as-implanted sample. Therefore, the RTA method can produce the mechanism in the Si⁺-implanted sample with the PL energy between blue and near-infrared band in place of the CTA method.     

Synthesis of nano-size BaMgAl10O17:Eu blue phosphor by a rapid exothermic reaction

Ultrafine particles of BaMgAl₁₀O₁₇:Eu²⁺ (BAM) phosphor were synthesized by a solid-state combustion reaction in a powder bed of 0.9BaCO₃+MgO+5Al₂O₃+0.05Eu₂O₃+k(KClO₃+1.5C) composition. A large exothermic reaction of the mixture (KClO₃+1.5C) leads to a self-sustaining combustion mode. Under optimized combustion conditions, the product consisted of BAM powder and KCl was obtained. BAM ultrafine particles resulting from the combustion process were easily obtained by simply washing the salt by-product with water. Combustion-processed BAM phosphor shows a homogeneous grain size of 100-500 nm, good dispersity, regular morphology, and improved luminescence properties.