冶金法生产太阳能级硅的除硼方法、技术及工艺

太阳能作为一种绿色可再生能源受到了广泛关注,而杂质去除是从冶金级硅中获得太阳能级硅所需的纯化过程,对硅基太阳能电池的制备至关重要。冶金法制备太阳能级多晶硅新工艺技术由于其能耗低、成本低和污染少等优点,成为研究开发的热点,但如何有效地去除硼是我们面临的最严峻的挑战之一。本文综述了硼的热力学和动力学性质(溶解度、扩散率、扩散系数、传质系数和活度系数)以及近年来除硼的相关课题研究(吹气、炉渣处理、等离子体处理、酸浸和溶剂精炼)。研究发现,溶剂精炼是一种很有前途的获取高纯硅的方法,硅的富集率以及硼的去除率均可达到90%以上,而添加剂能够加强硼化物的形成和析出来改进除硼工艺,且后续几乎可被完全消除,不会对精炼硅造成污染,这将更加有效除硼并增加工艺实用性。最后本文对几种除硼工艺进行了比较分析,并对冶金法的应用前景进行了展望。     

Improvement of solar cell efficiency by applying Si3N4 nanopattern on glass substrate

A cylindrical Si₃N₄ nanopattern whose heights was 200 nm was fabricated on a glass substrate, and an aluminum-doped zinc oxide (AZO) layer was grown on the nanopatterned glass substrate. The nanopattern was applied to an amorphous silicon solar cell in order to increase the light-scattering effect, thus enhancing the efficiency of the solar cell. The reflectance of the solar cell on the Si₃N₄ nanopattern decreased and its absorption increased. Compared to a flat substrate, the short-circuit current density (J_sc) and conversion efficiency of a solar cell on the Si₃N₄ nanopatterned substrate were improved by 17.9% and 24.2%, respectively, as determined from solar simulator measurements.     

Planar Tetracoordinate Silicon in Organic Molecules As Carbenoid-Type Amphoteric Centers: A Computational Study

Designing and synthesizing a stable compound with a planar tetracoordinate silicon (ptSi) center is a challenging goal for chemists. Here, a series of potential aromatic ptSi compounds composed of four conjugated rings shared by a centrally embedded Si atom are theoretically designed and computationally verified. Both Born–Oppenheimer molecular dynamics (BOMD) simulations and potential energy surface scannings verify the high stability and likely existence of these compounds, particularly Si-16-5555 (SiN₄C₈H₈) with 16 π electrons, under standard ambient temperature and pressure. Notably, the Hückel aromaticity rule, which works well for single rings, is inconsistent with the high stability of Si-16-5555 where the 16 p electrons are spread over four five-membered rings fused together. Bonding analyses show that the strong electron donation from the peripheral 12-membered conjugated ring with 16 π electrons to the vacant central atomic orbital Si 3p_z leads to the stabilization for both the ptSi coordination and planar aromaticity. The partial occupation of Si 3p_z results in the peculiar carbenoid-type behaviors for the amphoteric center. By modulating the electron density on the ring with substituent groups, we can regulate the nucleophilic and electrophilic properties of the central Si.     

Nanoporous silicon flakes as anode active material for lithium-ion batteries

Nanoporous-silicon (np-Si) flakes were prepared using a combination of an electrochemical etching process and an ultra-sonication treatment and the electrochemical properties were studied as an anode active material for rechargeable lithium-ion batteries (LIBs). This fabrication method is a simple, reproducible, and cost effective way to make high-performance Si-based anode active materials in LIBs. The anode based on np-Si flakes exhibited a higher performances (lower capacity fade rate, stability and excellent rate capability at high C-rate) than the anode based on Si nanowires. The excellent performance of the np-Si flake anode was attributed to the hollowness (nanoporous structure) of the anode active material, which allowed it to accommodate a large volume change during cycling.     

Diamond kinoform hard X‐ray refractive lenses: design,nanofabrication and testing

Motivated by the anticipated advantageous performance of diamond kinoform refractive lenses for synchrotron X‐ray radiation studies, this report focuses on progress in designing, nanofabricating and testing of their focusing performance. The method involves using lift‐off and plasma etching to reproduce a planar definition of numerically determined kinoform refractive optics. Tests of the focusing action of a diamond kinoform refractive lens at the APS 8‐ID‐I beamline demonstrate angular control of the focal spot.     

Higher-order Dirac solitons in binary waveguide arrays

We study optical analogues of higher-order Dirac solitons (HODSs) in binary waveguide arrays. Like higher-order solitons obtained from the well-known nonlinear Schrödinger equation governing the pulse propagation in an optical fiber, these HODSs have amplitude profiles which are numerically shown to be periodic over large propagation distances. At the same time, HODSs possess some unique features. Firstly, the period of a HODS depends on its order parameter. Secondly, the discrete nature in binary waveguide arrays imposes the upper limit on the order parameter of HODSs. Thirdly, the order parameter of HODSs can vary continuously in a certain range.     

Hypercoordination in Organotin Chemistry – A Novel O,C,O-Coordinating Ligand

Recent results are reported on the application of the novel O,C,O-coordinating pincer ligand {2,6-[P(O)(OEt)₂]₂-4-tert-Bu-C₆H₂} (A) for the synthesis of hypercoordinate organotin(IV) compounds ASnR₃ (R = Ph, Cl), heteroleptic stannylenes ASnR (R = Cl, CH₂SiMe3) and intramolecularly coordinated 1,2,5-oxaphosphastannolanes.     

Nano Silicon from Nano Silica Using Natural Resource (Rha) for Solar Cell Fabrication

Abstract

High purity (～99%) nano silica with an average particle size of ～100 nm was extracted at pH 3 at 650°C from a natural resource, rice husk, using alkaline extraction followed by acid precipitation method. Using nano silica as a precursor, silicon (Si) nanoparticles have been synthesized by high-temperature magnesiothermic reduction method. The prepared sample was characterized by X-ray diffraction, particle size analyzer, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray fluorescence analyzer, and UV–Vis spectroscopy. The comprehensive characterization studies indicate the pure phase formation of Si and the variation of particle size from 70 nm to 100 nm for samples synthesized at different sintering temperatures. Moreover, the silicon nanoparticles produced at 850°C have pure phase formation, high purity, and good absorption peaks. The efficiency calculated through IV characteristics is found to be increasing in silicon and ruthenium combination (2.67%), which is better than that achieved from the conventional solar cells. The produced silicon nanoparticles could be applied as an anode material for solar cell fabrication.