Control and synchronize a novel hyperchaotic system

The control and hybrid projective synchronization (HPS) strategies for a novel hyperchaotic system are investigated. Firstly, the novel hyperchaotic system is controlled to the unsteady equilibrium point or limit cycle via only one scalar controller which includes two state variables. Secondly, based on Lyapunov’s direct method HPS between two novel hyperchaotic systems is studied. A new nonlinear feedback vector controller is designed to guarantee HPS, which can be simplified ulteriorly into a single scalar controller to achieve complete synchronization between two novel hyperchaotic systems. Finally, numerical simulations are given to verify the effectiveness of these strategies. The proposed methods have certain significances for reducing the cost and complexity for controller implementation.     

全光纤量子通信系统中的高速偏振控制方案

偏振控制在光通信中是至关重要的技术, 关系着通信系统的稳定性和误码率. 本文提出一种基于双向Sagnac环工作方式的全光纤高速偏振控制方案, 通过调节环中一个光纤电光相位调制器的相位差而精确控制光场偏振方向, 并且实现了单个端口输出各种偏振态, 无需后续耦合操作. 相位控制精度为10^-3 rad, 最大消光比可达30 dB, 工作速率可达2 GHz. 由于本方案的精度、调制速度和稳定性都很高, 并采用了器件简单、成本低廉的全光纤光路, 易于集成, 在量子保密通信等光通信领域中有很好的应用前景. 关键词： 光纤偏振控制器 Sagnac环 量子通信     

Normal Feedback Stabilization of Periodic Flows in a Three-Dimensional Channel

We present an extension from two dimensions to three dimensions of a boundary control law, which stabilizes the parabolic profile of an infinite channel flow. The controller acts on the normal component of the velocity only. The stability is achieved without any a priori condition on the viscosity coefficient, that is on Reynolds number.     

北京谱仪III上利用神经网络方法进行粒子鉴别的研究

本文描述了一种多层感知器的神经网络系统在BESIII粒子鉴别技术中的应用。网络按照子探测器分别进行训练, 输出结果可以作为后续网络的输入或者可以为似然函数方法构建概率密度函数。蒙特卡罗模拟样本的检验结果表明, 利用神经网络方法可以在BESIII上获得较好的粒子鉴别效果。     

Digital prototype of LLRF system for SSRF

This paper describes a field programming gate array (FPGA) based low level radio frequency (LLRF) prototype for the SSRF storage ring RF system. This prototype includes the local oscillator (LO), analog front end, digital front end, RF out, clock distributing, digital signal processing and communication functions. All feedback algorithms are performed in FPGA. The long term of the test prototype with high power shows that the variations of the RF amplitude and the phase in the accelerating cavity are less than 1% and 1° respectively, and the variation of the cavity resonance frequency is controlled within ±10 Hz.     

Synchronization of chaotic fractional-order systems via active sliding mode controller

In this paper, we propose a controller based on active sliding mode theory to synchronize chaotic fractional-order systems in master-slave structure. Master and slave systems may be identical or different. Based on stability theorems in the fractional calculus, analysis of stability is performed for the proposed method. Finally, three numerical simulations (synchronizing fractional-order Lü-Lü systems, synchronizing fractional order Chen-Chen systems and synchronizing fractional-order Lü-Chen systems) are presented to show the effectiveness of the proposed controller. The simulations are implemented using two different numerical methods to solve the fractional differential equations.     

基于PMAC运动控制器的激光雕刻控制系统设计

为了实现激光雕刻切割机的灵活控制,提出了一种基于PMAC运动控制器的激光雕刻控制系统方案。PMAC运动控制器通过Pcomm32通信驱动程序接收工控机的指令数据,并将控制量传递给伺服驱动器,控制两个交流伺服电机的运转,同时伺服驱动器接收伺服电机的位置反馈信号,进行位置补偿,从而达到电机位置的精确控制。对运动控制模块进行了设计,并给出运动了程序基本结构。该方案结构简单,可靠性好,控制方式灵活,加工效率得到了大幅度的提高。     

Diffusion Model of a Non-Integer Order PIγ Controller with TCP/UDP Streams

In this article, a way to employ the diffusion approximation to model interplay between TCP and UDP flows is presented. In order to control traffic congestion, an environment of IP routers applying AQM (Active Queue Management) algorithms has been introduced. Furthermore, the impact of the fractional controller PIγ and its parameters on the transport protocols is investigated. The controller has been elaborated in accordance with the control theory. The TCP and UDP flows are transmitted simultaneously and are mutually independent. Only the TCP is controlled by the AQM algorithm. Our diffusion model allows a single TCP or UDP flow to start or end at any time, which distinguishes it from those previously described in the literature.     

基于气体浓度定量的嗅觉刺激器优化设计

现有的基于磁共振测量的嗅觉刺激器，通过调节嗅剂液体浓度的方法可以实现不同浓度的嗅觉刺激，但随着实验进行，受到嗅剂挥发以及实验环境（温度、湿度、气流量）变化的影响，很难确保输送至鼻腔的嗅剂气体浓度的稳定性，进而影响实验结果的准确性．本研究对本实验室前期开发的嗅觉刺激装置进行改进，实现了气体浓度精确定量．改进后的嗅觉刺激器主要分为三个部分：控制系统、反馈系统和气路系统．控制系统主要实现气路系统的送气控制和嗅剂气体浓度调节；反馈系统则负责对气体浓度进行测量；气路系统则在原有基础上添加活性炭装置，降低无关因素干扰．装置改进之后，不同气路切换时间为75.2 ms，比原装置减少了1 s，有效提高刺激精度．实验结果显示，气体浓度调节前，300 s内乙醇、吡啶、乙酸戊酯嗅剂气体浓度分别下降6.7%、71.4%、79.2%，嗅剂气体浓度短时间内发生较大改变．加入气体浓度调节功能后，当气体浓度下降至目标浓度的90%时，可通过调节气泵电压改变嗅剂气流与空气气流比例，从而调节嗅剂气体浓度至目标值，其中吡啶、乙酸戊酯用时13 s．