涤棉混纺织物近红外定量分析模型的建立及相关问题探讨

在废旧纺织品回收再利用中,纤维类型和含量的快速、准确测定是回收方案的关键部分。以598个废旧涤棉混纺织物为研究对象,采用便携式近红外（NIR）光谱仪测试了样品的原始近红外光谱。在1 400～1 700和1 900～2 200 nm光谱区域,100％棉和100％聚酯样品的光谱存在明显差异,并且这些光谱差异存在于各种颜色纤维上。同时探讨了斜线光谱产生的原因可能是由于织物表面效果、着色方法及粘附在纤维表面的细小颗粒造成的。深色样品易造成其光谱基线在短波区发生漂移,经导数预处理后,基线漂移基本消除,斜线光谱呈现出正常光谱的特征。利用偏最小二乘（PLS）法结合一阶导数、S-G平滑、均值中心化和正交信号校正法,建立了废旧棉-涤混纺织物定量分析模型。为了验证模型的可靠性,选取346个样本采用内部交叉验证均方根误差（RMSECV）和预测样品集外部检验法对模型进行检验,模型的RMSECV值0.002、校正集相关系数R_C＝0.998、预测相关系数R_P=0.997、预测标准差SEP＝1.121,模型预测正确率可达97％。对模型进行匹配样本t检验结果显示,NIR方法与国家标准方法无显着性差异。NIR预测值与重量法测定值误差在±3％以内时,二者的一致性在90％以上,当误差在±5％以内,二者的一致性在95％以上,分析时间小于10 s。因此,利用近红外技术结合所建模型可以快速、准确地预测废旧棉/涤混纺织物纤维成分的含量。     

基于蛇形光路的PET探测器作用深度提取方法

为实现正电子发射断层成像(Positron Emission Tomography,PET)探测器的作用深度(Depth Of Interaction,DOI)信息获取,本文提出一种基于分光技术的探测器设计方案.探测器采用晶体单元与硅光电倍增管(Silicon Photomultiplier,SiPM)一对一耦合、蛇形光路的设计和单端Anger加权读出方法进行DOI解码.基于GATE软件进行蒙特卡罗模拟,建立8×1的LSO晶体阵列(单根晶体尺寸3.1×3.1×20mm3);模拟泛场照射获取位置查找表;并进行不同深度的模拟,获得各晶体在各深度的空间分辨率.结果显示所模拟的探测器模块DOI分辨率在1.0~6.7mm之间,平均值为3.2mm.本文提出的基于蛇形光路的PET探测器方案能在维持系统成本和复杂度的前提下实现DOI解码,提升PET系统的成像性能.     

Combined ultrasonic and gamma-irradiation to prepare TiO2@PET-g-PAAc fabric composite for self-cleaning application

The grafting of polyacrylic acid (PAAc) onto the fabric of Poly(ethyleneterephthalate) (PET) was loaded with TiO₂ by a mixture sonication of TiO₂ dispersed in AAc dissolved in acetone solvent. Ultrasonic irradiation was utilized as a tool for a good dispersion of TiO₂ onto the PET fabric. The grafted PET fabrics with acrylic acid AAc monomer were successfully obtained using gamma-ray induced graft polymerization, the degree of grafting PET-g-PAAc fiber was 105%. The chemical compositions and crystal structure of grafted TiO₂@PET-g-PAAc fabrics were characterized by ATR-FTIR and XRD. It was found that loading of PET fiber with in TiO₂ particles showing the formation of anatase and rutile as performed by XRD. The thermal property of TiO₂@PET-g-PAAc was investigated by differential thermal analysis (DTA). The obtained result indicated the thermal property of the grafted TiO₂@PET-g-PAAc was increased. Image of scanning electron microscope (SEM) indicated the good adherent and good distribution of PAAc and TiO₂ with PET fabric. The self-cleaning property of TiO₂@PET-g-PAAc has been evaluated by using three kinds of dyes as models.     

Influence of High Temperatures on PET-Concrete Properties

Lightweight aggregate is an important material in reducing the unit weight of concrete and it is essential in the construction of high-rise buildings; besides, the use of recycled PET bottles as lightweight aggregate in concrete is an effective contribution for environmental preservation. So, the objective of the present work is to study the flexural strength of PET-concrete and PET thermal degradation in the concrete, when the blends with 10 and 20 vol% of PET are exposed to different temperatures (200, 400, 600 °C). The flexural strength of PET-concrete exposed to a heat source is strongly dependent on the temperature, the water/cement ratio, as well as on the content and particle size of PET. Furthermore, the activation energy for PET degradation is affected by temperature, location of PET particles on the slabs and the water/cement ratio. A higher content of water gives rise to hydrolytic degradation on PET and a higher vapor pressure that increases the formation of cracks on the concrete. The values of activation energy are higher on the center of the slabs than on the surface, due to the poor heat conduction of concrete.     

光诱导电子转移反应在有机合成中的应用

对近十年来报道的在有机合成中有重要意义的光诱导电子转移反应做了简要的总结. 包括六个部分: (1)光诱导电子转移(PET)反应的基本原理, (2) PET诱导的自由基离子裂解和去保护基反应, (3) PET诱导的加成和环加成反应, (4) PET诱导的环化反应和串联环化反应, (5)不对称PET反应, (6)微反应器中的PET反应.     

Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6,6, PET, PBT) in a hygrothermal environment

A study of the properties of short glass fibre reinforced thermoplastic composites based on poly(ethylene terephthalate), poly(butylene terephthalate) and polyamide-6,6 in an aggressive environment is reported. The influence of the fibre/matrix interface on the composite behaviour in a moist environment is especially studied. Competitive phenomena may explain differences observed according to the nature of the fibre surface treatment. Among them these characteristics may be an intrinsic fragility of some chemical interfacial bonds, the hydrophilicity of some chemical groups, the presence of long macromolecular chains neighbouring the interface or of a transcrystalline interfacial area.     

Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

寡聚核苷酸中鸟苷对四甲基罗丹明的荧光猝灭

具有核苷特异性的荧光猝灭技术在生物领域具有广泛应用.为了更好地理解这一过程的机理及其影响因素,研究了核苷对四甲基罗丹明（TMR）染料的分子间猝灭和在同一条寡聚核苷酸链中的分子内猝灭.与以前的研究结果一致,脱氧单磷酸鸟苷（dGMP）可以有效地猝灭TMR,而其他单磷酸腺苷对其的猝灭可以忽略.由斯特恩-沃尔默图获得TMR和dGMP的双分子猝灭常数为Ks=52.3L/mol.将TMR标记在寡聚核苷酸末端,可以观测到其荧光通过光致电子传递有效地被鸟苷猝灭,我们利用荧光相关光谱的方法测定了这一过程的猝灭速率常数.此外,所得的数据还显示鸟苷附近的碱基会对分子内的猝灭过程产生显著的位阻效应.这些结果将有助于设计寡聚核苷酸荧光探针和理解G猝灭过程.     

Influence of liquid crystalline polymer and recycled PET as minor blending components on rheological behavior,morphology, and thermal properties of thermoplastic blends

In this study, the potential of recycled poly(ethylene terepthalate) (rPET) as a well‐defined reinforcing material for the in situ microfibrillar‐reinforced composite (iMFC) was investigated in comparison with that of liquid crystalline polymer (LCP). Each dispersed phase (LCP or rPET) was melt blended with high density polyethylene (PE) by using extrusion process. The rheological behavior, morphology, and the thermal stability of LCP/PE and rPET/PE blends containing various dispersed phase contents were investigated. All blends and LCP exhibited shear thinning behavior, whereas Newtonian fluid behavior was observed for rPET. The incorporation of LCP or rPET into PE significantly improved the processability. A potential of rPET as a processing lubricant by bringing down the melt viscosity of the blend system was as good as LCP. The elongated LCP domains were clearly observed in as‐extruded strand. Although the viscosity ratio of the rPET/PE system was lower than that of the LCP/PE blend system, most rPET domains appeared as small droplets. An addition of LCP and rPET into the PE matrix improved the thermal resistance significantly in air but not in nitrogen. The obtained results suggested the high potential of rPET as a processing aid and good thermally resistant material similar to LCP. Copyright © 2009 John Wiley & Sons, Ltd.