The layer-by-layer (LbL) assembly process of creating highly structured thin films derived from layers of polyelectrolytes
and nanoparticles was adopted in this study to modify the surface of lignocellulosic fibers. Aqueous dispersions of clay nanoplatelets
were created with ultrasonication and characterized with dynamic light scattering and atomic force microscopy in which confirmed
the presence of individual clay nanoplatelets. Film thickness of never-dried clay and poly(diallyldimethylammonium chloride)
(PDDA) multilayers was studied with a quartz crystal microbalance with dissipation monitoring (QCM-D). Using identical LbL
deposition parameters, a slurry of steam-exploded wood fibers was modified by alternate adsorption of PDDA and clay with multiple
rinsing steps after each adsorption cycle. Zeta potential measurements were used to characterize the fiber surface charges
after each adsorption step while SEM images revealed that the LbL film masked the cellulose microfibril structure. Using a
thermogravimetric analyzer, LbL modified steam-exploded wood fibers were observed to attain increased thermal stability relative
to the unmodified material tested in both air and nitrogen atmospheres. Significant char for the LbL clay coated steam-exploded
wood suggests the multilayer film serves as a barrier creating an insulating layer to prevent further decomposition of the
material. This nanotechnology may have a positive impact on the processing of lignocellulosic fibers in thermoplastic matrices,
designing of paper-based overlays for building products, and modification of cellulosic fibers for textiles. 相似文献
Novel biphenol‐based wholly aromatic poly (arylene ether sulfones) containing pendant sulfonate groups were prepared by direct aromatic nucleophilic substitution polycondensation of disodium 3,3′‐disulfonate‐4,4′‐dichlorodiphenyl sulfone (SDCDPS), 4,4′‐dichlorodiphenylsulfone (DCDPS) and biphenol. Copolymerization proceeded quantitatively to high molecular weight in N‐methyl‐2‐pyrrolidinone at 190°C in the presence of anhydrous potassium carbonate. Tough membranes were successfully cast from the control and the copolymers, which had a SDCDPS/DCDPS mole ratio of either 40:60 or 60:40 using N,N‐dimethylactamide; the 100% SDCDPS homopolymer was water soluble. Short‐term aging (30 min) indicates that the desired acid form membranes are stable to 220°C in air and conductivity values at 25°C of 0.110 (40%) and 0.170 S/cm (60%) were measured, which are comparable to or higher than the state‐of‐the art fluorinated copolymer Nafion 1135 control. The new copolymers, which contain ion conductivity sites on deactivated rings, are candidates as new polymeric electrolyte materials for proton exchange membrane (PEM) fuel cells. Further research comparing their membrane behavior to post‐sulfonated systems is in progress. 相似文献
With a view towards direct methanol fuel cell applications, novel sulfonated poly(phenylene sulfide sulfone nitrile) (sPPSSfN) has been prepared and subsequently crosslinked by a Friedel‐Craft reaction using 4,4′‐oxybis(benzoic acid) as a crosslinker to achieve lower water swelling and lower methanol permeability. The dimensional change of SPPSSfN40 is 43.7% in 90 °C liquid water but that of the crosslinked membrane, XsPPSSfN40, is 23.3% while maintaining proton conductivity at 0.22 S · cm−1. These results show that the Friedel‐Craft crosslinking of the novel sPPSSfN membrane effectively reduces water uptake and the degree of swelling while improving the dimensional stability and maintaining high proton conductivity.
Proton exchange membrane (PEM) fuel cell stack requires elastomeric gaskets in each cell to keep the reactant gases within their respective regions. Long-term durability of the fuel cell stacks depends heavily on the functionality of the elastomeric gasket material. Chemical and mechanical stability of the elastomeric material is of great concern to the overall performance of the fuel cell stacks. The degradation of a commercially available gasket material, ethylene-propylene-diene monomer (EPDM), was investigated in a simulated PEM fuel cell environment in this work. One solution and two temperatures, based on actual fuel cell operation, were used in this study. Optical microscopy was used to show the topographical changes on the sample surface. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy was employed to study the surface chemistry of the gasket material before and after exposure to the simulated PEM fuel cell environment over time. Atomic absorption spectrometry was used to identify the leachants in the soaking solution from the elastomeric material. Microindentation test and dynamic mechanical analysis (DMA) were conducted to assess the change of mechanical properties of the samples exposed to the environment. The atomic absorption spectrometer analysis shows that silicon and calcium were leached from the material into the soaking solution. The ATR-FTIR results indicate that the chemical changes were not apparent. The microindentation test and DMA results reveal that mechanical properties were not changed significantly. 相似文献
This paper provides a comprehensive review on the research and development in multi-scale numerical modeling and simulation of PEM fuel cells. An overview of recent progress in PEM fuel cell modeling has been provided. Fundamental transport phenomena in PEM fuel cells and the corresponding mathematical formulation of macroscale models are analyzed. Various important issues in PEM fuel cell modeling and simulation are examined in detail, including fluid flow and species transport, electron and proton transport, heat transfer and thermal management, liquid water transport and water management, transient response behaviors, and cold-start processes. Key areas for further improvements have also been discussed. 相似文献
The aim of the present work is the synthesis and characterization of new perfluorinated monomers bearing, similarly to Nafion®, acidic groups for proton transport for potential and future applications in proton exchange membrane (PEM) fuel cells. To this end, we focused our attention on the synthesis of various molecules with (i) sufficient volatility to be used in vacuum polymerization techniques (e.g., PECVD)), (ii) sulfonic, phosphonic, or carboxylic acid functionalities for proton transport capacity of the resulting membrane, (iii) both aliphatic and aromatic perfluorinated tags to diversify the membrane polarity with respect to Nafion®, and (iv) a double bond to facilitate the polymerization under vacuum giving a preferential way for the chain growth of the polymer. A retrosynthetic approach persuaded us to attempt three main synthetic strategies: (a) organometallic Heck-type cross-coupling, (b) nucleophilic displacement, and (c) Wittig–Horner reaction (carbanion approach). Preliminary results on the plasma deposition of a polymeric film are also presented. The variation of plasma conditions allowed us to point out that the film prepared in the mildest settings (20 W) shows the maximum monomer retention in its structure. In this condition, plasma polymerization likely occurs mainly by rupture of the π bond in the monomer molecule. 相似文献
Microbial fuel cells (MFCs) are an environmentally friendly technology and a source of renewable energy. It is used to generate electrical energy from organic waste using bacteria, which is an effective technology in wastewater treatment. The anode and the cathode electrodes and proton exchange membranes (PEM) are important components affecting the performance and operation of MFC. Conventional materials used in the manufacture of electrodes and membranes are insufficient to improve the efficiency of MFC. The use of nanomaterials in the manufacture of the anode had a prominent effect in improving the performance in terms of increasing the surface area, increasing the transfer of electrons from the anode to the cathode, biocompatibility, and biofilm formation and improving the oxidation reactions of organic waste using bacteria. The use of nanomaterials in the manufacture of the cathode also showed the improvement of cathode reactions or oxygen reduction reactions (ORR). The PEM has a prominent role in separating the anode and the cathode in the MFC, transferring protons from the anode chamber to the cathode chamber while preventing the transfer of oxygen. Nanomaterials have been used in the manufacture of membrane components, which led to improving the chemical and physical properties of the membranes and increasing the transfer rates of protons, thus improving the performance and efficiency of MFC in generating electrical energy and improving wastewater treatment. 相似文献