大功率激光制备a-C和a-C∶H类金刚石膜的光学性能研究

采用大功率高重复频率准分子激光溅射热解石墨靶制备了类金刚石碳膜, 研究了实验条件对类金刚石膜光学性能的影响, 发现氢可以提高膜中sp3键的含量和膜的光学透过率. 在实验参数范围内, 膜的光学性能随着氢压的增加而提高. 根据类金刚石膜的反应沉积机理对上述结果进行了分析、解释.     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

Nafion/Poly(sodium 4‐styrenesulfonate) Mixed Coating Modified Bismuth Film Electrode for the Determination of Trace Metals by Anodic Stripping Voltammetry

To improve the reproducibility, stability, and sensitivity of bismuth film electrode (BiFE), we studied the performances of a mixed coating of two cation‐exchange polymers, Nafion (NA) and poly(sodium 4‐styrenesulfonate) (PSS), modified glassy carbon BiFE (GC/NA‐PSS/BiFE). The characteristics of GC/NA‐PSS/BiFE were investigated by scanning electron microscopy and cyclic voltammetry. Various parameters were studied in terms of their effect on the anodic stripping voltammetry (ASV) signals. Under optimized conditions, the limits of detection were 71 ng L^?1 for Cd(II) and 93 ng L^?1 for Pb(II) with a 10 min preconcentration. The results exhibited that GC/NA‐PSS/BiFE can be a reproducible and robust tool for monitor of trace metals by ASV rapidly and environmentally friendly, even in the presence of surface‐active compounds.     

Amperometric morphine sensing using a molecularly imprinted polymer-modified electrode

This study incorporates morphine into a molecularly imprinted polymer (MIP) for the amperometric detection of morphine. The polymer, poly(3,4-ethylenedioxythiophene), PEDOT, is an electroactive film that catalyzes morphine oxidation and lowers the oxidization potential on an indium tin oxide (ITO) electrode. The MIP-PEDOT modified electrode is prepared by electropolymerizing PEDOT onto an ITO electrode in a 0.1 M LiClO₄ solution with template addition (morphine). After template molecule extraction, the oxidizing current of the MIP-PEDOT modified electrode is measured in a 0.1 M KCl solution (pH = 5.3) at 0.75 V (versus Ag/AgCl/sat’d KCl) with the morphine concentration varying in the 0.1-5 mM range. A linear range, displaying the relationship between steady-state currents and morphine concentrations, from 0.1 to 1 mM, is obtained. The proposed amperometric sensor could be used for morphine detection with a sensitivity of 91.86 μA/cm² per mM. A detection limit of 0.2 mM at a signal-to-noise ratio of 3 is achieved. Moreover, the proposed method can discriminate between morphine and its analogs, such as codeine.     

Improved efficiency of organic solar cells with modified hole‐extraction layers

The aim of this work has been to study the influence of modified hole‐extraction layers on the performance of organic solar cells (OSCs) based on blends of poly (3‐hexylthiophene) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. The hole‐extraction layers consist of poly (3,4‐ethylene dioxythiophene):polystyrene sulfonic acid (PEDOT:PSS) doped with different concentrations of bromine. Compared with pristine OSC without adding bromine to the hole‐extraction layer, the bromine‐doped OSCs show a 49% increase in the power conversion efficiency (from 2.12 to 3.16%), which could be attributed to the increase of electrical and optical properties of PEDOT:PSS films after the addition of bromine. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 125–128, 2012     

New Insight into the EC’ Mechanism of Uric Acid Regeneration in the Presence of Ascorbic Acid on a Poly(3,4‐ethylenedioxithiophene) Modified Gold Electrode

A gold electrode surface was functionalized by means of an electropolymerized conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) organic layer. This modified electrode was used for the electrochemical detection of ascorbic (AA) and uric (UA) acids in an aqueous mixture with a selectivity around 340 mV. The electrochemical reactions kinetics were limited by AA diffusion and UA adsorption at the electrode surface, respectively. Following a previous study ([Electrochem Comm. 2011 , 13, 423–425]) cyclic voltammetry was used to provide a better understanding of the EC’ mechanism of regeneration of UA by AA. Experiments particularly showed that allantoin (i. e. the final product of UA oxidation) is not actually involved in the synergic mechanism but rather the oxidized UA product diimine which is adsorbed at the electrode surface.     

Effects of additives and post‐treatment on the thermoelectric performance of vapor‐phase polymerized PEDOT films

Vapor‐phase polymerization (VPP) is an important method for the fabrication of high‐quality conducting polymers, especially poly(3,4‐ethylenedioxythiophene) (PEDOT). In this work, the effects of additives and post‐treatment solvents on the thermoelectric (TE) performance of VPP‐PEDOT films were systematically investigated. The use of 1‐butyl‐3‐menthylinidazolium tetrafluoroborate ([BMIm][BF₄], an ionic liquid) was shown to significantly enhance the electrical conductivity of VPP‐PEDOT films compared with other additives. The VPP‐PEDOT film post‐treated with mixed ethylene glycol (EG)/[BMIm][BF₄] solvent displayed the high power factor of 45.3 μW m^?1 K^?2 which is 122% higher than that prepared without any additive or post‐treatment solvent, along with enhanced electrical conductivity and Seebeck coefficient. This work highlighted the superior effect of the [BMIm][BF₄] additive and the EG/[BMIm][BF₄] solvent post‐treatment on the TE performance of the VPP‐PEDOT film. These results should help with developing the VPP method to fabricate high‐performance PEDOT films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1738–1744     

Thermally driven self-healing PEDOT conductive films relying on reversible and multiple Diels–Alder interaction

Thermally healing capability of cracks and defects is important and urgent for the safe operation and life extending of electric materials and devices. Here, by the combination of thermally driven reversible Diels–Alder (DA) interaction and in-situ chemical oxidative polymerization of 3,4-ethylenedioxythiophene (EDOT), a series of intrinsically conductive poly(3,4-ethylenedioxythiophene) (PEDOT)/DA composites possess intrinsically self-healing property under low-temperature (reverse DA reaction at 100°C; DA crosslinking at 60°C) stimulus were achieved. The crosslinking DA bonding reactions are multiple from the co-existence of pre-synthesized macromolecular polyurethane attached DA units (PU-DA) and 2,4-hexadiyne-1,6-diol (DADOL) in the films. PU-DA involved in the polymerization process of EDOT to endow PEDOT with outstanding solution-processability, uniform film making, and structural self-healing capability, while DADOL was added to enhance the cross bonding between polymer chains. This work will accelerate the research and application development of intrinsically self-healing conducting polymers for commercial capacitors, antistatic coatings, implantable, printable electronics, and so on.     

Nonorganic semiconductor - Conductive polymer intercalate nanohybrids: Fabrication, properties, application

Impedance spectroscopy studies performed for intercalated multilayer structures of the type of a layered inorganic semiconductor (InSe)/conducting polymer (PEDOT:PSS) revealed low-frequency inductive response and the growth of dielectric permeability in megahertz region together with the decrease of dielectric loss angle down to one as a consequence of the conducting polymer intercalation into semiconducting layers. A model describing the unusual current-voltage characteristic is proposed.