Electrocatalysis of the SiC Particle‐Modified Glassy Carbon Electrode for the Oxidation of Adrenaline

The electrocatalytic properties of the SiC particle‐modified glassy carbon electrode (MGC) for adrenaline oxidation were studied by cyclic voltammetry (CV), double‐potential step chronocoulometry (DPSCC), and electrochemical impedance spectroscopy (EIS) techniques in McIlvaine buffer solution. It was shown that the electrode modified with SiC particles markedly displayed an electrocatalytic effect on the process of the electrochemical reaction of adrenaline, i.e., the activity and the reversibility of the MGC electrode has been significantly improved. This was attributed to the adsorption effect of the electroactive adrenaline molecules on the MGC electrode surface.     

Thermal behaviour of advanced composite materials based on SiC fibres

Emanation thermal analysis (ETA) was used for characterization of thermal behaviour of SiC_f/SiC composites on heating in argon and air, respectively. Effect of gas environment (argon, air) and helium ions implantation on the microstructure development of the SiC_f/SiC composite prepared by chemical vapour infiltration (CVI) from Nicalon CG fibres was investigated under in situ conditions of heating. The annealing of near surface structure irregularities was observed in the range 280-700°C and evaluated by means of the mathematical model, assuming that the structure irregularities served as diffusion paths for radon. The ETA reflected the formation of amorphous silica and its subsequent crystallization to crystoballite. Morphology of the SiC_f/SiC samples before and after the heat treatments was characterized by means of SEM. This revised version was published online in July 2006 with corrections to the Cover Date.     

碳热还原制备不同形貌的碳化硅纳米线

以酚醛树脂为碳源，正硅酸乙酯为硅源，硝酸镧和表面活性剂为调控剂，通过溶胶-凝胶和碳热还原反应制备了不同形貌的碳化硅纳米线。采用X射线衍射、扫描电子显微镜、透射电子显微镜和X射线散射能谱对所制备的碳化硅纳米线进行表征。结果表明，通过此方法所制备的碳化硅纳米线均为立方结构的β-SiC，分别具有直线状、竹节状和链珠状、分枝状等不同形貌。金属催化剂和表面活性剂对碳化硅纳米线的结构和形貌变化有重要影响。     

聚酰亚胺LB膜热解制备SiC薄膜的XPS研究

用XPS对沉积在硅基片上的聚酰亚胺LB膜以及由它真空热解制备的SiC薄膜进行了研究 ,并对其形成过程进行了跟踪分析 .XPS结果显示聚酰亚胺LB膜结构均匀 ,质量良好 ;真空热解时 ,约在 6 70℃时LB膜中的C与衬底Si反应形成SiC ;Ar离子溅射深度俄歇谱表明所制备的SiC膜中Si和C浓度成梯度分布 ,说明SiC是由Si和C相互扩散反应形成的     

耐超高温SiC(Al)纤维先驱体——聚铝碳硅烷纤维的研究

以聚硅碳硅烷(PSCS)与乙酰丙酮铝(Al(AcAc)3)为原料,在常压高温条件下反应制备出聚铝碳硅烷(PACS),经过熔融纺丝制备了PACS纤维.应用GPC、IR、XPS、29Si-NMR、27Al-NMR、TG、SEM、元素分析和增重等一系列分析,分别对PACS纤维的微观组成、结构以及性能进行了分析.研究结果表明,以原料质量配比为6∶100(Al(AcAc)3∶PSCS)合成的PACS化学式为SiC2.0H7.5O0.13Al0.018,数均分子量为1700左右,最适宜制备PACS纤维;PACS纤维中主要存在SiC4、SiC3H等结构,同时存在Si—O—Al键;在氮气气氛中,PACS纤维的陶瓷产率达到52%左右;预氧化处理,PACS纤维中Si—H键与空气中的氧反应形成Si—O—Si交联结构,较聚碳硅烷(PCS)纤维易于氧化,经过预氧化的PACS纤维陶瓷产率达到80%左右,是制备耐超高温SiC(Al)陶瓷纤维的合适纤维;用预氧化PACS纤维制备的SiC(OAl)纤维和SiC(Al)纤维抗拉强度高,耐高温性能好.     

Dependence of electronic and optical properties of multilayer SiC and GeC on stacking sequence and external electric field

The electronic and optical properties of different stacked multilayer SiC and GeC are investigated with and without external electric field (EEF). The band gaps of multilayer SiC and GeC are found smaller than that of monolayer SiC and GeC due to the interlayer coupling effect. When EEF is applied, the direct band gaps (ΔK–M) of multilayer SiC and direct band gaps (ΔK–K) of multilayer GeC all turn to indirect band gaps (ΔK–G) as the band at the G point drops dramatically toward zero. The imaginary part ε₂(ω)s of multilayer SiC and GeC show that new absorption peaks between 2–5 eV appear when the polarized direction is perpendicular to the layer plane, and new absorption peaks in infrared region appear as the EEF is higher than a certain point when the polarized direction is parallel to the layer plane. Our calculations reveal that different stacking sequences and EEF can provide a wide tunable band structures and optical properties for multilayer SiC and GeC.     

Synthesis and Characterization of New Alumina and Titania-Containing Hybrid Network Ceramer Materials from Sol-Gel Processing

Transparent hybrid materials have been prepared by incorporating either an alumina or titania alkoxide sol with triethoxysilane end-capped polytetramethylene oxide (PTMO) oligomer. In order to avoid undesirable precipitation after the addition of water, a β-dicarbonyl ligand, ethyl acetoacetate, was used. Triethoxysilane endcapped polytetramethylene oxide with a molecular weight of 2000 (g/mol) was chosen to react with either the alumina or titania sol to demonstrate the features of the reaction scheme. The extent of reaction leading to network formation has been qualitatively followed by infrared spectroscopy. A series of solid films were prepared by varying the molar ratio of either aluminum tri(sec-butoxide) or titanium tetraisopropoxide to ethyl acetoacetate, and the weight fraction of alumina or titania to that of PTMO. The refractive index as well as the general structure-property behavior of these hybrid materials were studied.     

Dispersion Mechanism of Superfine SiC Particles in the Different Condition Liquid

SiC@A1(OH)₃-Y(OH)₃ core-shell composite particles are synthesized by co-precipitation method for strengthening the antioxidation of SiC at high temperature. To reach better A1(OH)₃-Y(OH)₃ composite shell and higher coating ratio on the SiC particles surfaces, SiC particles must be adequately dispersed in the SiC suspension during the coating process. The dispersion mechanism of SiC particles is investigated by the sedimentation method. Through test and analysis, the optimum conditions of the dispersion of SiC particles in the SiC suspension are sedimentating for 10 minutes, ultrasonic dispersion for 10 minutes, the lower SiC concentration, pH = 9, the dispersant content for the 2% volume of SiC suspension and using the polyelectrolyte dispersant, respectively.     

Room-temperature magnetic properties of SiC based nanowires synthesized via microwave heating method

Two kinds of ferromagnetic SiC based nanowires with and without Ni catalyst were successfully synthesized by employing microwave heating method. The comprehensive characterizations and vibrating sample magnetometer (VSM) have been applied to investigate the micro-structures and magnetic properties of as-grown nanowires. For the nanowires synthesized without using Ni catalyst, the diameters and lengths are in the range of 20–60 nm and dozens of micrometers, respectively. Particularly, the results of transmission electron microscopy (TEM) show that the nanowires consist of SiC core and SiO_x shell. The SiC/SiO_x coaxial nanowires exhibit room-temperature ferromagnetism with saturation magnetization (Ms) of 0.2 emu/g. As to the nanowires obtained using Ni catalyst, the scanning electron microscopy (SEM) results indicate that the Ni catalyzed nanowires have a nano-particle attached on the tip and a uniform diameter of approximately 50 nm. The vapor-liquid-solid (VLS) growth mechanism can be used to explain the formation of the Ni catalyzed nanowires. The detection result of VSM indicates that the Ni catalyzed nanowires possess the paramagnetism and the ferromagnetism, simultaneously. The enhancement of the ferromagnetism, compared with the SiC/SiO_x coaxial nanowires, could be attributed to the Ni₂Si and NiSi phases.