CARBONIZED FIBROUS RESIN AS A NEW SORBENT FOR SAMPLING POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) IN AMBIENT AIR

1. INTRODUCTION When investigating contaminated sites it is often essential to determine specific pollutants in a large number of ambient air samples. Amongst these sites, polycylic aromatic hydrocarbons (PAHs) are a major class of compounds that hav…     

Separation of polar and non-polar analytes using dimethyl sulfoxide-modified subcritical water

Separations using methanol–water or acetonitrile–water mixtures at different temperatures have been well investigated in reversed-phase liquid chromatography. However, reversed-phase separation with dimethyl sulfoxide (DMSO)–water mixtures is much less studied. In this work, separations of polyhydroxybenzenes, phenol derivatives, benzene, toluene, ethylbenzene, and xylenes (BTEX), and polycyclic aromatic hydrocarbons (PAHs) with DMSO-modified subcritical water were performed at several temperatures to evaluate the effect of temperature on the elution strength of DMSO–water mixtures. The column efficiency obtained by using DMSO-modified subcritical water was also studied. Finally, the resolution of ethylbenzene and p-xylene was investigated.     

Material transport between the atmosphere and sediment of the Lake Balaton

A monitoring system was developed to gain information on the present level of pollutants in the Lake Balaton, Hungary. Determination of 13 polycyclic aromatic hydrocarbons (PAHs) and inorganic pollutants (mostly toxic metals) in aerosol, precipitation and sediment samples was carried out. The aim of collecting aerosol and precipitate samples in the same site at the same period was to determine the distribution of elements in two depositions. For the fractionation by particle size, aerosols were sampled by a cascade impactor. A simple three-stage sequential leaching procedure was applied to establish the distribution of metals among environmentally mobile, bound to carbonates and oxides, and environmentally immobile, (bound to silicates) fractions in aerosols. Sediment samples were collected from 17 different sites inside of the lake and 10 sites at harbors at 30–70 cm in depth. Core samples were cut to 10-cm pieces, dried at room temperature, and finally passed through a 63-μm sieve. Total concentrations of elements were determined by atomic absorption spectrometry (AAS) after an acidic digestion. The concentrations of PAHs were determined by HPLC method with fluorescence detection.In aerosol samples collected from September 6, 2002 to January 26, 2003, concentration of Cd was <0.1 μg/m³, and the majority of Cd has been found in the mobile fraction. Cadmium was associated to particles between 0.25 and 2 μm indicating the anthropogenic origin. Similar distribution of Pb was obtained in all seasons, and the highest concentration of Pb was found as 8.6 ng/m³ in particle size of 0.7 and 1.4 μm. Results of total concentration of elements of bottom sediments of the Lake Balaton and harbors were compared to Interim Sediment Quality Guideline (ISQG) values and the Probable Effect Level (PEL) values. Data showed that the average concentrations of elements were usually less than those of ISQGs and other background data for soils and geochemical values. The sediment is not polluted and its disposal is feasible. There is no direct correlation between the concentration of elements deposited onto the surface of the lake from dry and wet deposition and the upper part of the sediment. So, from the budget of the deposition, the concentration of elements in the upper layer of the sediment cannot be predicted.Seasonal changes of the concentration of PAHs in aerosol was observed, samples collected at winter contained the highest values. In December–January 2002/2003, the wet deposition was found as 64 μg/m² period. Among the individual compounds, the wet deposition rate of phenantrane, fluoranthene and pyrene was dominant, while for dry deposition, these compounds were fluoranthene and pyrene. The concentrations of ∑PAHs found for all sites and depth of sediment samples ranged from 11 to 1734 μg/kg dry weight with an average of 132 μg/kg. These values represent a quite low pollution level compared to other sediment with anthropogenic influence. Based on the results, it can be definitely confirmed that the chemical quality of the water and sediment of the Lake Balaton is satisfactory.     

Advanced Methodologies for Adsorption/Thermal Desorption with Tenax-TA for the Analysis of Polycyclic Aromatic Hydrocarbons and Sulfur Compounds

We have evaluated an analytical method for the determination of polycyclic aromatic hydrocarbons (PAHs) and sulfur compounds in air by means of adsorption/temperature-programmed thermal desorption (ATPTD) with small bed volume (0.08g) Tenax-TA cartridges, followed by a cryogenic trap in a precolumn with liquid nitrogen as an appropriate concentration method before capillary gas chromatography is described. The enriched components from the adsorption cartridges are transferred to the capillary column with a valveless switching system. Recoveries were determined for the complete ATPTD method. Desorption recoveries near 100% were found for various of polycyclic aromatic hydrocarbons and sulfur compounds. The sulfur compounds known to cause nuisance odors in the atmosphere near sulfur recovery and sewerage treatment works were also determined.     

北京地区大气颗粒物中不同功能区多环芳烃的分布特征

用撞击式分级采样器同步采集了北京市城乡结合部、郊区的2003年四个季节的不同粒径大气颗粒物样品,用气相色谱-质谱分析了其中的多环芳烃。两个功能区的PAHs总质量浓度分布趋势均为：冬季>秋季>春季>夏季；不同环数PAHs在不同粒径颗粒物中的分配比例比较显示，粗颗粒物中2 环或3环PAHs的分配比例比其在高环PAHs的比例要大。     

Determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter collected with low volume samplers

The determination of polycyclic aromatic hydrocarbons (PAHs) contained in samples of particulate matter (PM), collected with low volume pumps, were carried out with an high sensitivity method that comes from several revisions of a previous method. The present work describes how, by using programmable temperature vaporization (PTV) and a mass selective detector with inert ionic source for the GC-MS analysis and the modifications of microwave-assisted extraction (MAE), the sensitivity of the method can be increased.The PAHs chosen for testing the method are: benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (Ip) and dibenzo[a,h]anthracene (DbA). They, in fact, belong to that group of substances that are the most harmful for human health for their carcinogenicity.PAHs recoveries for spiked standard solutions at different concentrations were between 95 and 100% with relative standard deviation ranging from 1 to 3%. The revised method was validated using a 1649a urban dust standard reference material (SRM). The results obtained were in good agreement with certified values. The high sensitivity of the method allows to carry out analyses using only a half of the sampled filter (usually 47 mm diameter membranes). In this way, the other half can be used for the characterization of the other components of PM (heavy metals, organic carbon, ions, etc). The last step has been constituted by application of the optimized method on real samples collected in two cities located in Southern Italy (Bari and Taranto).     

Calibration of the complex matrix effects on the sampling of polycyclic aromatic hydrocarbons in milk samples using solid phase microextraction

Solid phase microextraction (SPME), a simple, fast and promising sampling technique, has been widely used for complex sample analysis. However, complex matrices could modify the absorption property of coatings as well as the uptake kinetics of analytes, eventually biasing the quantification results. In the current study, we demonstrated the feasibility of a developed calibration method for the analysis of polycyclic aromatic hydrocarbons (PAHs) in complex milk samples. Effects of the complex matrices on the SPME sampling process and the sampling conditions were investigated. Results showed that short exposure time (pre-equilibrium SPME, PE-SPME) could increase the lifetime of coatings, and the complex matrices in milk samples could significantly influence the sampling kinetics of SPME. In addition, the optimized sampling time, temperature and dilution factor for PAHs were 10 min, 85 °C and 20, respectively. The obtained LODs and LOQs of all the PAHs were 0.1–0.8 ng/mL and 1.4–4.7 ng/mL, respectively. Furthermore, the accuracy of the proposed PE-SPME method for milk sampling was validated by the recoveries of the studied compounds in two concentration levels, which ranged from 75% to 110% for all the compounds. Finally, the proposed method was applied to the screening of PAHs in milk samples.     

Selective detection of polyaromatic hydrocarbons on diesel exhaust particles using sputtered neutral mass spectrometry

Aiming for the highly sensitive analysis of aromatic hydrocarbons in organic mixtures, selective ionization using an ultraviolet laser ionization technique was examined for the determination of sputtered neutral species on organic surfaces. The mass spectrum of a model mixture containing pyrene and n‐alkane showed that only pyrene was ionized and detected, whereas a mass spectrum without laser irradiation, i.e. in the case of secondary ion mass spectrometry, was dominated by many n‐alkane fragment peaks. This technique was applied for the detection of polyaromatic hydrocarbons adsorbed on diesel exhaust particles. Two kinds of polyaromatic hydrocarbons were clearly detected because many aliphatic fragment signals were suppressed by means of ultraviolet laser ionization. Copyright © 2013 John Wiley & Sons, Ltd.     

Lichens as biomonitors for the determination of polycyclic aromatic hydrocarbons (PAHs) in Caracas Valley,Venezuela

Biomonitoring of PAH air pollution using lichens was carried out. Sixteen PAHs were studied in 11 locations along the valley of Caracas (Venezuela). The results of this work indicate that 14 of the 16 analysed PAHs were highly accumulated into the lichen thalli of Pyxine coralligera Malme. PAH levels in the samples revealed that the several volatile PAHs (naphthalene, acenaphtylene, acenaphtene, and fluoranthene) have the highest levels in the majority of the studied locations. The fluoranthene/pyrene and phenantrene/antracene ratios suggested that the major sources of PAHs are anthropogenic, mainly associated with gasoline and diesel combustion (pyrolytic) and unburnt oil derivates (petrogenic). The total PAH concentrations obtained in the present study were in the range of 0.24 to 9.08?µg/g, similar to those reported by other works in European and Asian cities.