Single‐crystal diffraction at the Extreme Conditions beamline P02.2: procedure for collecting and analyzing high‐pressure single‐crystal data

Fast detectors employed at third‐generation synchrotrons have reduced collection times significantly and require the optimization of commercial as well as customized software packages for data reduction and analysis. In this paper a procedure to collect, process and analyze single‐crystal data sets collected at high pressure at the Extreme Conditions beamline (P02.2) at PETRA III, DESY, is presented. A new data image format called `Esperanto' is introduced that is supported by the commercial software package CrysAlis^Pro (Agilent Technologies UK Ltd). The new format acts as a vehicle to transform the most common area‐detector data formats via a translator software. Such a conversion tool has been developed and converts tiff data collected on a Perkin Elmer detector, as well as data collected on a MAR345/555, to be imported into the CrysAlis^Pro software. In order to demonstrate the validity of the new approach, a complete structure refinement of boron‐mullite (Al₅BO₉) collected at a pressure of 19.4 (2) GPa is presented. Details pertaining to the data collections and refinements of B‐mullite are presented.     

银纳米颗粒对聚合物太阳能电池性能的提高

采用水溶性银纳米颗粒附着在反型太阳能电池的电子传输层上,用以提高有机太阳能电池的短路电流。所制备的器件结构为ITO/ZnO/Ag NPs/P3HT(Poly 3-hexylthiophene):PC_[60]BM/MoO₃/Ag。其金属银纳米颗粒的表面等离激元在410 nm处出现了共振吸收峰,半峰全宽约为60 nm。器件的光电流在可见光范围内均有所增加,短路电流相对于标准器件提高了20.2%,光电转化效率相对提高了17.2%。     

旋涂速度对制备P3HT有机场效应晶体管性能的影响

采用溶液化的方法制备了以PMMA为绝缘层、P3HT为有源层的有机场效应晶体管.研究了P3HT有源层和PMMA绝缘层的旋涂速度对器件性能的影响.实验结果表明,当P3HT和PMMA的旋涂速度均为2 000 r/min时,器件的性能最佳.峰值场效应迁移率为6.84×10^-2 cm²·V^－1·s^－1.结果表明,选择适当的旋涂速度是一种有效提高溶液化制备有机场效应晶体管性能的方法.     

New developments of advanced high-strength steels for automotive applications

Automotive industry asks for higher resistant steels to lighten parts and improve crash resistance. Keeping a good ductility while increasing tensile strength requires the development of new grades in which hardening mechanisms counteract the drop in elongation when enhancing mechanical resistance. This is mainly achieved with multiphase steels and completing dislocation hardening by twinning and martensite transformation during straining. This has led to high-strength steel families, some of them being already used in body in white (Dual Phase (DP) and TRIP steels). Others, still in development, will soon emerge on the market (Quenched and Partitioned (Q&P), medium-Mn steels or TWIP).     

P掺杂锐钛矿相TiO2的第一性原理计算

利用基于密度泛函理论的第一性原理对不同P掺杂形式(P替位Ti, P替位O, 间隙P)的锐钛矿相TiO₂的晶格常数、电荷布居、能带结构、分态密度和吸收光谱进行了计算. 结果表明, P替位Ti时, TiO₂体积减小, P替位O和间隙P的存在使TiO₂的体积膨胀; 替位Ti的P和间隙P均有不同程度的氧化, 而替位O的P带有负电荷. 三种P掺杂形式均导致锐钛矿相TiO₂禁带宽度的增大, 并在TiO₂禁带之内引入了掺杂局域能级. P掺杂导致TiO₂禁带宽度增大的程度依次为: 间隙P>P替位Ti>P替位O. 吸收光谱的计算结果表明, P替位Ti并不能增强TiO₂的可见光吸收能力, 但间隙P的存在大幅提高了TiO₂的可见光光吸收能力, 间隙P有可能是造成实验上P掺杂增强锐钛矿相TiO₂光催化活性的重要原因. 关键词： P掺杂 2')" href="#">锐钛矿相TiO₂ 第一性原理     

Luminescence in LiNaSO4:Eu phosphor

Abstract

LiNaSO₄: Eu is a recently discovered thermoluminescence dosimetry (TLD) phosphor which is more sensitive than the widely used CaSO₄:Dy. In this paper results are reported on TL glow curves, TL emission spectra and PL photoluminescence. These measurements help to understand the role of impurity and the mechanism of thermoluminescence in this phosphor.     

Dislocation-density-based constitutive modelling of tensile flow and work-hardening behaviour of P92 steel

The flow and work-hardening behaviour of tempered martensitic P92 steel have been investigated using phenomenological constitutive model in the temperature range 300–873 K for the strain rates ranging from 3.16 × 10^?5 to 1.26 × 10^?3 s^?1. The analysis indicated that the hybrid model reduced to Estrin–Mecking (E–M) one-internal-variable model at intermediate and high temperatures. Further, the analysis also indicated that dislocation dense martensite lath/cell boundaries and precipitates together act as effective barriers to dislocation glide in P92 steel. The flow behaviour of the steel was adequately described by the E–M approach for the range of temperatures and strain rates examined. Three distinct temperature regimes have been obtained for the variations in work-hardening parameters with respect to temperature and strain rate. Signatures of dynamic strain ageing in terms of the anomalous variations in work-hardening parameters at intermediate temperatures and the dominance of dynamic recovery at high temperatures have been observed. The evaluation of activation energy suggested that deformation is controlled by the dominance of cross-slip of dislocations at room and intermediate temperatures, and climb of dislocations at high temperatures.     

Thermoelectric properties of tin clathrates under hydrostatic pressure

We report the temperature dependence of electrical resistance (R) and thermopower (S) of clathrate Cs₈Sn₄₄ under high pressure up to 1.2 GPa. We observe a reversible gap widening, prominent relaxation effect of R, irreversible increase of |S| under high pressure. We also find that the power factor S²σ (σ: electrical conductivity) reaches a maximum at pressure of 0.3 GPa. Comparison of the experimental results with band structure calculations suggests that the intrinsic vacancy in the clathrate structure of Cs₈Sn₄₄ plays an important role in transport properties under high pressure. Measurements on Cs₈Zn₄Sn₄₂, a clathrate which has defects other than vacancies, are compared with Cs₈Sn₄₄. The results indicate that replacing Sn by Zn has similar effect as the intrinsic vacancy on S.     

对位酚类衍生物作为化学发光分析的增强剂研究

在化学发光分析中，常常要用到碱性条件下鲁米诺与过氧化氢的反应系统，通过催化剂辣根过氧化物酶使反应顺利进行。如果再加入适当的增强剂，则灵敏度提高且发光时间延长，可改善测定的重现性。实验证明，对位酚类衍生物，如：对叔丁基苯酚，对甲苯酚的发光增强作用明显，其发光效率可上升几十倍，发光时间也获得有效延长。     

Long-Term Changes in a Heat Exchanger Steel

The steel ASTM A213 P22 is used for superheater outlet header in power plants. During duty cycles lasting over tens of years the temperature is of the order of 545°C and the pressure 125 atm. The microscopic changes in these steels are hard to analyze under working conditions, but they are believed to be responsible for the appearance of creeps in such devices. Investigation of the microscopic modifications will help to predict future failures due to creeps, increasing the reliability and saving a lot of money.We report the investigation of such changes in ASTM A213 P22 steel in use for 30 years as a Superheater header at Haifa power station. The analysis has been carried out using Mössbauer Spectroscopy, X-ray diffraction and optical microscopy. As a result it seems that the morphology and phase change of the carbide phases M₃C/M₇C₃ and M₂₃C₆ are the most prominent changes leading to the material failures.