Random and cooperative sequential adsorption on infinite ladders and strips

We analyze various processes where particles are added irreversibly and sequentially at the sites of infinite ladders or broader strips (i.e., on terraces) of adsorption sites. For sufficiently narrow strips or ladders, exact solution in closed form is possible for a variety of processes. Often this is most naturally achieved by mapping the process onto an equivalent one-dimensional process typically involvingcompetitive adsorption. We demonstrate this procedure for sequential adsorption with nearest-neighbor exclusion on a 2× square ladder. For other select processes on strips slightly too broad for exact solution, almost exact analysis is possible exploiting an empty-site shielding property. In this way, we determine a jamming coverage of 0.91556671 for random sequential adsorption of dimers on a 2× square ladder. For broader strips, we note that the complexity of these problems quickly approaches that for × lattices.     

非低温法的稀有气体纯化技术概述

稀有气体广泛应用于工业生产中,如离子刻蚀、检漏等。但是它们在地球上的含量比较少,属于稀有资源,因此需要对它们进行纯化以循环再利用。首先介绍了不同气体纯化的原理,然后以实际生产中的不同稀有气体使用范围为例,说明纯化装置的设计方法和需要考虑的问题。为以后气体纯化装置的设计提供借鉴。     

Reinvestigation of pressure broadening parameters at 60-GHz band and single 118.75 GHz oxygen lines at room temperature

Low pressure measurements of broadening parameters of the 118.75 GHz fine structure line of oxygen molecule have been made by a BWO-based spectrometer with acoustic detector (RAD) at room temperature. Pressure broadening parameters were obtained for the buffer gases O₂, N₂, Ne, He, Ar, H₂O, CO₂, and CO and have the following values 2.23 ± 0.01, 2.245 ± 0.02, 1.375 ± 0.02, 1.62 ± 0.03, 2.005 ± 0.02, 2.52 ± 0.04, 2.66 ± 0.08, and 2.31 ± 0.05 MHz/Torr, respectively. Measured central frequency is 118 750.340 ± 0.007 MHz. The central frequencies and broadenings by O₂ and N₂ of fine structure lines 1⁺, 5⁻, 7⁺, 11⁺, and 15⁻ belonging to the 60-GHz band are also measured. Comparison of previous and recent data on electronic, rotational, and fine structure lines broadenings reveals their close values (within 10%) and dependencies on corresponding rotational quantum numbers for these different oxygen spectra stretching from millimeter through submillimeter up to the optical bands. Such similarity could be used for estimation of the broadenings of not measured yet oxygen lines.     

Electrical and chemical characteristics of nano-meter gold encapsulated in mesoporous and microporous channels and cages of FSM-16 and Y zeolites

The dc and ac conductivities as well as the dielectric constant () were measured for different zeolites encapsulated gold (AuCl₃) samples at different temperatures (300-500 K) and various frequencies (5 kHz-1 MHz). The conductivity was found to change in the order Au/FSM-27>Au/NaY>Au/FSM-47. Sorbed water contained inside zeolites assists greatly the proton mobility (zeolite protons) and the ion mobility (Na⁺ and Au⁺) and hence enhance the electric conduction in the temperature range 300-373 K. Raising the temperature over 373 K induces dehydration effect that assists the metallic gold formation and thus a dramatic loss in conductivity was revealed. The conduction mechanism was expected to be partially ionic and partially electronic. The IR study showed that the exposure of Au zeolites to CO gas produced a characteristic band of Au⁺-CO at 2180 cm⁻¹ that tends to decrease with temperatures and even vanishes at 376 K in favor of Au⁰-CO at 2128 cm⁻¹. Similarly, a phase transition at 338 K, that occurs in the range 300-376 K, was confirmed by DTA to further emphasize the temperature regions of either Au⁺ cations (338 K) or Au⁰ (376 K) formation.     

奶制品热值测定

利用WZR-1A型精密微电脑量热计系统地测量了8种奶制品的恒容燃烧热.准确称取一定量的基准物质,放入氧弹中充入高压纯氧,将测试样品在氧弹中完全燃烧,并记录燃烧前后时间与量热计温度变化数据,利用仪器自带的数据处理软件计算出仪器热容量,然后再准确称取一定量的奶制品,装入已准确测定热值的燃烧胶囊中后,将测试数据用自编的计算机处理程序对测试数据处理,从而得到奶制品的燃烧热值.此法准确、简便、实用,可用于日常检测工作.     

Unified Solution of the Expected Maximum of a Discrete Time Random Walk and the Discrete Flux to a Spherical Trap

Two random-walk related problems which have been studied independently in the past, the expected maximum of a random walker in one dimension and the flux to a spherical trap of particles undergoing discrete jumps in three dimensions, are shown to be closely related to each other and are studied using a unified approach as a solution to a Wiener-Hopf problem. For the flux problem, this work shows that a constant c = 0.29795219 which appeared in the context of the boundary extrapolation length, and was previously found only numerically, can be derived analytically. The same constant enters in higher-order corrections to the expected-maximum asymptotics. As a byproduct, we also prove a new universal result in the context of the flux problem which is an analogue of the Sparre Andersen theorem proved in the context of the random walker's maximum.     

In situ XPS study of Pd(1 1 1) oxidation. Part 1: 2D oxide formation in 10 mbar O2

The oxidation of the Pd(1 1 1) surface was studied by in situ XPS during heating and cooling in 3 × 10⁻³ mbar O₂. A number of adsorbed/dissolved oxygen species were identified by in situ XPS, such as the two dimensional surface oxide (Pd₅O₄), the supersaturated O_ads layer, dissolved oxygen and the R 12.2° surface structure.Exposure of the Pd(1 1 1) single crystal to 3 × 10⁻³ mbar O₂ at 425 K led to formation of the 2D oxide phase, which was in equilibrium with a supersaturated O_ads layer. The supersaturated O_ads layer was characterized by the O 1s core level peak at 530.37 eV. The 2D oxide, Pd₅O₄, was characterized by two O 1s components at 528.92 eV and 529.52 eV and by two oxygen-induced Pd 3d_5/2 components at 335.5 eV and 336.24 eV. During heating in 3 × 10⁻³ mbar O₂ the supersaturated O_ads layer disappeared whereas the fraction of the surface covered with the 2D oxide grew. The surface was completely covered with the 2D oxide between 600 K and 655 K. Depth profiling by photon energy variation confirmed the surface nature of the 2D oxide. The 2D oxide decomposed completely above 717 K. Diffusion of oxygen in the palladium bulk occurred at these temperatures. A substantial oxygen signal assigned to the dissolved species was detected even at 923 K. The dissolved oxygen was characterised by the O 1s core level peak at 528.98 eV. The “bulk” nature of the dissolved oxygen species was verified by depth profiling.During cooling in 3 × 10⁻³ mbar O₂, the oxidised Pd²⁺ species appeared at 788 K whereas the 2D oxide decomposed at 717 K during heating. The surface oxidised states exhibited an inverse hysteresis. The oxidised palladium state observed during cooling was assigned to a new oxide phase, probably the R 12.2° structure.     

Low temperature adsorption of oxygen on reduced V2O3(0 0 0 1) surfaces

Well ordered V₂O₃(0 0 0 1) films were prepared on Au(1 1 1) and W(1 1 0) substrates. These films are terminated by a layer of vanadyl groups under typical UHV conditions. Reduction by electron bombardment may remove the oxygen atoms of the vanadyl layer, leading to a surface terminated by vanadium atoms. The interaction of oxygen with the reduced V₂O₃(0 0 0 1) surface has been studied in the temperature range from 80 to 610 K. Thermal desorption spectroscopy (TDS), infrared reflection absorption spectroscopy (IRAS), high resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) were used to study the adsorbed oxygen species. Low temperature adsorption of oxygen on reduced V₂O₃(0 0 0 1) occurs both dissociatively and molecularly. At 90 K a negatively charged molecular oxygen species is observed. Upon annealing the adsorbed oxygen species dissociates, re-oxidizing the reduced surface by the formation of vanadyl species. Density functional theory was employed to calculate the structure and the vibrational frequencies of the O₂ species on the surface. Using both cluster and periodic models, the surface species could be identified as η²-peroxo () lying flat on surface, bonded to the surface vanadium atoms. Although the O-O vibrational normal mode involves motions almost parallel to the surface, it can be detected by infrared spectroscopy because it is connected with a change of the dipole moment perpendicular to the surface.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.