Stripping dispersion hollow fiber liquid membrane containing carrier PC-88A and HNO3 for the extraction of Sm3+

Stripping dispersion hollow fiber liquid membrane system（SDHFLM） containing feed phase adding acetate buffer solution and dispersion solution with HNO₃ solution as the stripping solution and membrane solution of 2-ethyl hexyl phosphoric acid-mono-2-ethylhexyl ester（PC-88A） dissolved in kerosene,has been studied for the extraction of Sm³⁺.Many factors including pH value, volume ratio of membrane solution to stripping solution（OAV） and carrier concentration on Sm³⁺ extraction were investigated. Experimental results indicate that the optimum extraction conditions of Sm³⁺ were obtained as that PC-88A concentration was 0.120 mol/L,and OAV was 1.00 in the dispersion phase,and pH value was 4.80 in the feed phase.When initial Sm³⁺ concentration was 1.20×10^-4 mol/L,the extraction percentage of Sm³⁺ was up to 92.8%in 160 min.     

Preconcentration and determination of methyl methacrylate by dispersive liquid–liquid microextraction

This article describes the preconcentration of methyl methacrylate in produced water by the dispersive liquid–liquid microextraction using extraction solvents lighter than water followed by gas chromatography. In the present experiments, 0.4 mL dispersive solvent (ethanol) containing 15.0 μL extraction solvent (toluene) was rapidly injected into the samples and followed by centrifuging and direct injection into the gas chromatograph equipped with flame ionization detector. The parameters affecting the extraction efficiency were evaluated and optimized including toluene (as extraction solvent), ethanol (as dispersive solvent), 15 μL and 0.4 mL (as the volume of extraction and dispersive solvents, respectively), pH 7, 20% ionic strength, and extraction's temperature and time of 20°C and 10 min, respectively. Under the optimum conditions, the figures of merits were determined to be LOD = 10 μg/L, dynamic range = 20–180 μg/L, RSD = 11% (n = 6). The maximum recovery under the optimized condition was determined to be 79.4%.     

Comparison of sample preparation methods combined with gas chromatography with electron‐capture detection for the analysis of multipesticide residues in lotus seeds

Sample preparation is always the major bottleneck in analytical chemistry for the determination of pesticide residues. Different sample preparation methods have been proposed due to the wide variety of pesticides used and the inherent complexity of the matrices. In this study, different sample preparation methods including SPE, matrix solid‐phase dispersion, the quick, easy, cheap, efficient, rugged, and safe method, and a one‐step completion method were compared and evaluated for extracting pesticides from lotus seeds. Analysis was carried out using GC with electron‐capture detection. The results showed that good recoveries for tested pesticides were obtained by using Florisil in the four methods, and the extraction efficiency of the one‐step completion method was superior to the other three methods. The one‐step completion method was confirmed to have good linearity, reproducibility, stability, and recovery for the detection of 36 pesticides in lotus seed samples. The data collected from this study are expected to prove useful in regulating the concentration of the residues in lotus seeds, as well as in protecting human health from the hazards posed by these residues.     

2-乙基己基磷酸单(2-乙基己基)酯萃淋树脂分离-火花源质谱法测定高纯氧化镱中痕量稀土杂质

本文采用萃取色谱法以2-乙基已基膦酸单(2-乙基已基)酯(P_507)萃淋树脂为固定相,以HCI-NH_4CI体系为淋洗液,研究了99.999%~99.9999%的高纯Yb_2O_3中稀土杂质和Yb基体的分离条件,将杂质淋洗液富集于复合螯合剂-活性碳上,经灼烧灰化后制成样品电极,进行质谱测定.测定下限达 0.01~0.05 μg/g,可用于高纯 Yb_2O_3中杂质的测定.回收率在80%以上.     

A new approach to untargeted integration of high resolution liquid chromatography–mass spectrometry data

Because of its high sensitivity and specificity, hyphenated mass spectrometry has become the predominant method to detect and quantify metabolites present in bio-samples relevant for all sorts of life science studies being executed. In contrast to targeted methods that are dedicated to specific features, global profiling acquisition methods allow new unspecific metabolites to be analyzed. The challenge with these so-called untargeted methods is the proper and automated extraction and integration of features that could be of relevance. We propose a new algorithm that enables untargeted integration of samples that are measured with high resolution liquid chromatography–mass spectrometry (LC–MS). In contrast to other approaches limited user interaction is needed allowing also less experienced users to integrate their data. The large amount of single features that are found within a sample is combined to a smaller list of, compound-related, grouped feature-sets representative for that sample. These feature-sets allow for easier interpretation and identification and as important, easier matching over samples. We show that the automatic obtained integration results for a set of known target metabolites match those generated with vendor software but that at least 10 times more feature-sets are extracted as well. We demonstrate our approach using high resolution LC–MS data acquired for 128 samples on a lipidomics platform. The data was also processed in a targeted manner (with a combination of automatic and manual integration) using vendor software for a set of 174 targets. As our untargeted extraction procedure is run per sample and per mass trace the implementation of it is scalable. Because of the generic approach, we envision that this data extraction lipids method will be used in a targeted as well as untargeted analysis of many different kinds of TOF-MS data, even CE- and GC–MS data or MRM. The Matlab package is available for download on request and efforts are directed toward a user-friendly Windows executable.     

火焰原子吸收光谱法测定天然水中微量铁的形态

研究了用抗坏血酸为还原剂,使二价铁离子与邻菲啰啉(phen)形成螯合物,用硝基苯萃取,火焰原子吸收光谱法测定有机相中的铁。方法检出限为1.7ng·ml~(-1),回收率为98.0％～109.6％,线性范围为0～10.0μg·ml~(-1)(原水相),线性相关系数为0.9994。测定结果与ICP-AES法结果对照相对误差小于9.46％。     

Optimum conditions for the water extraction of L-theanine from green tea

Theanine is a unique non-protein amino acid found in tea (Camellia sinensis). It contributes to the favourable umami taste of tea and is linked to various beneficial effects in humans. There is an increasing interest in theanine as an important component of tea, as an ingredient for novel functional foods and as a dietary supplement. Therefore, optimal conditions for extracting theanine from tea are required for the accurate quantification of theanine in tea and as an efficient first step for its purification. This study examined the effects of four different extraction conditions on the yield of theanine from green tea using water and applied response surface methodology to further optimise the extraction conditions. The results showed that temperature, extraction time, ratio of water-to-tea and tea particle sizes had significant impacts on the extraction yield of theanine. The optimal conditions for extracting theanine from green tea using water were found to be extraction at 80 °C for 30 min with a water-to-tea ratio of 20:1 mL/g and a tea particle size of 0.5-1 mm.     

The dependence of sorbent/analyte type on observed differences in supercritical fluid extraction efficiencies employing extraction vessels of different dimensions

Summary The effect of extraction cell dimensions (i.d.: length) on supercritical fluid extraction (SFE) efficiencies of polychlorinated biphenyls (PCBs) is shown to be dependent on the type of sorbent used. For octadecylsilane (C18) sorbents, there is a significant increase in observed SFE recoveries of PCBs when the cell dimensions are made more broad (increased i.d.: length); whereas, no effect of cell geometry is observed when the common adsorbent, Florisil, is utilized. Additionally, recoveries decreased in proportion to the chlorine number, for the PCBs studied, for octadecylsilane sorbents, while no such effect was observed for Florisil. These results illustrate the magnitude of the matrix effect in SFE, which generally dominated observed recoveries, even in the simplest analyte/sorbent systems such as the one studied here.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

A novel separation technique of diastereomeric esters of pyridylethanols by extraction: formal total synthesis of PNU-142721, HIV-1 reverse transcriptase inhibitor

The separation of diastereomeric esters derived from (±)-pyridylethanols and 3β-acetoxyetienic acid were achieved by an extraction technique using diethyl ether and aqueous hydrochloric acid. A formal total synthesis of PNU-142721 was effectively carried out to prepare the chiral, non-racemic synthon 1-furo[2,3-c]pyridin-5-yl-ethanol (1) by means of this technique. The structure optimized using MOPAC calculations on each diastereomer suggested the presence of intramolecular CH/π interaction in only the (S)-isomer of the diastereomers.