Conversion of biomass residual to acid-modified bio-chars for efficient adsorption of organic pollutants from industrial phosphoric acid: an experimental,kinetic and thermodynamic study

ABSTRACT

This study reports the removal of organic matters from phosphoric acid using waste-produced bio-charcoal structures. Particularly, the freshly made bio-char species via pyrolysis and two sub-driven acids activated charcoals were applied during the removal process. The treated charcoal with hydrochloric and nitric acids had attained a higher adsorption rate for organic matters than that of the non-treated one. Removal percentages of 70% and 60% were, respectively, attained by acid-modified chars. The kinetics of the adsorption process was fitted via pseudo-first/second-order and Morris–Weber models. The thermodynamic parameters of the presented sorption process indicate that organic matter removal has been endothermic, physical and spontaneous.     

Simultaneous Determination of Hydrogen Peroxide and Organic Hydroperoxides in Water

The kinetics of the reactions of H 2 O 2 and of methyl, ethyl, tert -butyl, and cumene hydroperoxides with I m were investigated in the presence and absence of molybdate as catalyst. These results were utilized to develop an analytical method for the simultaneous determination of H 2 O 2 and organic hydroperoxides in aqueous solutions. The total amount of H 2 O 2 and organic hydroperoxides can be determined by the spectrophotometric measurement of $ {\rm I}_3^ - $ formed quantitatively during 30 min of heating at 60°C. Catalase selectively decomposes H 2 O 2 in solutions containing organic hydroperoxides. The total amount of the latter can therefore be determined iodometrically after H 2 O 2 decomposition. In the oxidation of leuco crystal violet to crystal violet by H 2 O 2 and organic hydroperoxides, horseradish peroxidase exerts similar activities in the reactions involving methyl and ethyl hydroperoxides and H 2 O 2 , but its activity is much lower with tert -butyl and cumene hydroperoxide. It was observed that acetate buffer is unsuitable for pH adjustment in this type of hydroperoxide determination in consequence of the slow oxidation of the dye in the blank solution.     

Bridging Ligand Length Controls AT Selectivity and Enantioselectivity of Binuclear Ruthenium Threading Intercalators

The slow dissociation of DNA threading intercalators makes them interesting as model compounds in the search for new DNA targeting drugs, as there appears to be a correlation between slow dissociation and biological activity. Thus, it would be of great value to understand the mechanisms controlling threading intercalation, and for this purpose we have investigated how the length of the bridging ligand of binuclear ruthenium threading intercalators affects their DNA binding properties. We have synthesised a new binuclear ruthenium threading intercalator with slower dissociation kinetics from ct‐DNA than has ever been observed for any ruthenium complex with any type of DNA, a property that we attribute to the increased distance between the ruthenium centres of the new complex. By comparison with previously studied ruthenium complexes, we further conclude that elongation of the bridging ligand reduces the sensitivity of the threading interaction to DNA flexibility, resulting in a decreased AT selectivity for the new complex. We also find that the length of the bridging ligand affects the enantioselectivity with increasing preference for the ΔΔ enantiomer as the bridging ligand becomes longer.     

一种新型黄色荧光类水滑石材料的制备及表征

用适量的Zn(Ⅱ)取代镁铝水滑石中的Mg(Ⅱ),同时将一定量的2-对联苯基-8-羟基喹啉分散到类水滑石层间的亲油性阴离子中,使其与层板表面上的Zn(Ⅱ)配位,用一步法合成、组装得到一类新型黄色荧光类水滑石复合物(Zn-(HQ-4-biPh)-HTlc)。采用荧光光谱、红外光谱、X射线衍射、扫描电子显微镜和热分析等对其进行了表征。研究结果表明,Zn-(HQ-4-biPh)-HTlc在蓝光(481 nm)激发下可发出黄色荧光(554 nm),与其相应的含锌配合物(Zn[2-(p-biph)-8-Q-O]2)相比,不仅可节省配体用量,而且具有更高的发光强度和更好的热稳定性,有望在白光LED等光电领域得到应用。     

水分子对α相CL-20热分解机理影响的分子动力学研究

研究六硝基六氮杂异伍兹烷(CL-20)晶体不同晶型在不同温度下的反应机理, 对于深入认识含能材料在极端条件下的冲击起爆、冲击点火和爆轰过程等具有重要意义. 基于反应力场, 研究水分子在纯α相CL-20及其水合物的晶体结构中数量随时间的变换, 分析水分子对两种体系的初始分解和第二阶段的分解路径的影响. 计算结果表明: CL-20 分子的初始分解路径与水分子无关, 第二阶段的分解反应与水分子有关. 在低温(T<1500 K)下, 水分子对两种体系没有影响, 二者的初始分解路径均为N-NO₂键生成NO₂自由基; 在1500 K≤T≤2500 K时, 水分子作为反应物或与NO₂、、OH自由基等组成催化体系, 生成O₂、H₂O₂等产物, 加速水合物体系在高温下的第二阶段反应, 使得高温下水合物体系的化学反应速率和反应生成的NO₂自由基的数量比纯CL-20体系的化学反应速率和反应生成的NO₂自由基的数量大; 在T>2500 K时, 水分子的催化反应抑制CL-20初始分解反应, 使得在3000 K时纯CL-20体系的反应速率大于水合物体系中CL-20的反应速率.     

活性炭基软包装超级电容器用有机电解液

使用了一种新型的有机电解液(三乙基甲基四氟硼酸铵/(丙烯碳酸酯+乙腈): MeEt₃NBF₄/(AN+PC))和两种传统有机电解液(四乙基四氟硼酸铵/丙烯碳酸酯(Et₄NBF₄/AN)和四乙基四氟硼酸/乙腈(Et₄NBF₄/PC)), 制作成活性炭(AC)基软包装超级电容器. 在不同电压窗口下对新型有机电解液的循环伏安和电化学阻抗谱进行了表征, 并在0-3 V的电压窗口下, 通过循环伏安、电化学阻抗谱、恒流充放电、漏电流、自放电、循环寿命和库仑效率, 对以上三种电解液进行了综合的比较. 结果表明, 新型有机电解液综合了AN和PC各自的优点, 性能优异.     

基于CAN总线的某型数字化战车自动测试系统设计

针对现代数字化战车电气与电子系统技术复杂、各分系统关联程度高、维修保障困难等问题,设计了一种基于CAN总线的数字化战车自动测试系统;整体设计基于模块化思想,充分利用车载备用总线,综合运用了DSP+FPGA控制处理技术、AFPN智能故障诊断技术,能够对车载电气与电子系统进行分系统独立测试和全系统联合检测,具有快速故障定位能力和拓扑适应能力;采用适配器与上位机测试软件的分体式设计,实现了平台物理资源复用。应用表明,该系统能够较好的适用于现代数字化战车的维修保障,使用方便,故障诊断快速有效。     

基于ARM的嵌入式超声传播时间测量装置

应用超声波检测技术进行检测时,通常需对超声波在介质中的传播时间进行精准的测量,为精准测量超声波的传播时间,设计了一套基于ARM的嵌入式超声传播时间测量装置。该装置电路运行稳定,成本低廉,采用多次测量结果取算数平均值的方法以减小随机干扰,采用参比方法放置接收探头以消减电路中电子器件的延时。通过对实验结果进行分析,得出该装置可精准测量超声波在实验试块中的传播时间且满足设计要求,分辨率可达一纳秒。     

夜视战场环境视觉传感信息采集系统设计

夜视战场环境视觉传感信息的实时获取是跟踪夜视战场图像处理分析的前提,针对夜视战场环境的复杂特征,设计了夜视战场环境视觉传感信息采集系统,分析了系统的总体结构,系统硬件主要包括视觉传感器、传感器控制卡和扩展卡、图像采集与存储以及信号调理电路,给出了系统采集节点的程序设计流程以及传感信息采集的具体程序代码实现过程。实验结果说明,所设计系统可有效采集到夜间军事战场中的传感信息,并且具有较高的采集精度。     

基于嵌入式的工业控制人机界面系统研究

针对工业控制系统网络化和良好人机交互性的需求,构建和开发了基于ARM9微处理器的通用工业控制人机界面系统。硬件部分主要讨论了以S3C2440微处理器为核心的硬件电路设计,外围电路模块包括SDRAM及Flash存储器电路、以太网电路、RS-232/RS-422电路、触摸屏及LCD接口等电路,在分析了硬件系统信号完整性的前提下,完成了6层PCB的设计工作。软件部分主要研究了U-Boot移植和内核裁剪技术,编写了相关的硬件设备驱动程序,设计了基于QT/Embedded的人机界面和相关应用程序。论文研究最终实现了工业控制系统的人机交互和控制需求。