介孔分子筛Al-MCM-41的合成与催化异构化性能

采用正硅酸乙酯(TEOS)为硅源,九水硝酸铝为铝源,十六烷基三甲基溴化胺(CTMABr)为模板剂,在室温条件下合成了介孔Al-MCM-41分子筛.通过XRD、N2等温吸附、SEM、FTIR等分析测试手段表征了分子筛的介孔结构和表面性质.结果表明所合成的分子筛有良好的介孔结构和较高的有序度,并且有较高的比表面积(达到816 m2·g-1)和窄的孔径分布.采用程序升温的焙烧方式、凝胶Al/Si比最大范围控制在0.06～0.13有利于合成高度有序的介孔Al-MCM-41分子筛.评价结果表明,所合成的Al-MCM-41分子筛对桥式四氢双环戊二烯(endo-TCD)异构化反应合成挂式异构体exo-TCD及金刚烷具有较高的催化活性和极高的选择性.     

离子源辅助电子枪蒸发制备Ge1-xCx薄膜

应用电子枪蒸发纯Ge,考夫曼离子源辅助的方法在Ge基底上沉积了Ge1－xCx薄膜.制备过程中,Ge作为蒸发材料,CH4作为反应气体.通过改变CH4/(CH4+Ar)的气体流量比（G）,制备了G从40％到85％的Ge1－xCx薄膜.应用X射线衍射仪（XRD）测量了Ge1－xCx薄膜的晶体结构,使用傅里叶红外光谱仪（FTIR）测量了2～22 μm的光学透过率,X射线光电子能谱测试（XPS）计算得到C的含量随G的变化关系,用纳米压痕硬度测试计测量了Ge1－xCx薄膜的硬度,原子力显微镜（AFM）测量了G为60％,85％时Ge1－xCx薄膜的表面粗糙度.测试结果表明：制备的Ge1－xCx薄膜在不同的G值下均为无定形结构.折射率随着G值的增加而减小,在3.14～3.89之间可变,并具有良好的均匀性以及极高的硬度.     

Divergence-free WKB theory

We present a divergence-free WKB theory, which is a new semiclassical theory modified by nonperturbative quantum corrections. Conventionally, the WKB theory is constructed upon a trajectory that obeys the bare classical dynamics expressed by a quadratic equation in momentum space. Contrary to this, the divergence-free WKB theory is based on a higher-order algebraic equation in momentum space, which represents a dressed classical dynamics. More precisely, this higher-order algebraic equation is obtained by including quantum corrections to the quadratic equation, which is the bare classical limit. An additional solution of the higher-order algebraic equation enables us to construct a uniformly converging perturbative expansion of the wavefunction. Namely, our theory removes the notorious divergence of wavefunction at a turning point from the WKB theory. Moreover, our theory is able to produce wavefunctions and eigenenergies more accurate than those given by the traditional WKB method. In addition, the divergence-free WKB theory that is based on the cubic equation allows us to construct a uniformly valid wavefunction for the nonlinear Schrödinger equation (NLSE). A recent short letter [T. Hyouguchi, S. Adachi, M. Ueda, Phys. Rev. Lett. 88 (2002) 170404] is the opening of the divergence-free WKB theory. This paper presents full formalism of this theory and its several applications concerning wavefunction and eigenenergy to show that our theory is a natural extension of the traditional WKB theory that incorporates nonperturbative quantum corrections.     

Microwave-absorbing properties of NiCoZn spinel ferrites

In this paper, the microwave-absorbing properties of (Ni_1−x−yCo_xZn_y)Fe₂O₄ spinel ferrites have been investigated within the frequency range of 0.5–14 GHz. There are two kinds of resonance peaks observed in the permeability spectra: domain-wall resonances at lower frequency and spin-rotation resonances at higher frequency. The reflection loss (RL) calculations show that the prepared NiCoZn spinel ferrites are good electromagnetic (EM) wave absorbers in microwave range. In terms of the absorbing frequency band (AFB) and the matching thickness (t_m), (Ni_0.407Co_0.207Zn_0.386)Fe₂O₄ shows the best performances: t_m=3.15 mm and the AFB is 8.64–11.2 GHz. Decreasing the weight ratio of NiCoZn ferrites in ferrites/wax composites, the matching thickness decreases and the AFB shifts to higher frequencies. Compared with the absorbers with single-layer ferrites, the absorbers with double-layers ferrites have better absorbing performances, such as a thinner matching thickness and a wider EM wave AFB.     

Evolutionary Prisoner's Dilemma on heterogeneous Newman-Watts small-world network

We focus on the heterogeneity of social networks and its role to the emergence of prevailing cooperators and sustainable cooperation. The social networks are representative of the interaction relationships between players and their encounters in each round of games. We study an evolutionary Prisoner's Dilemma game on a variant of Newman-Watts small-world network, whose heterogeneity can be tuned by a parameter. It is found that optimal cooperation level exists at some intermediate topological heterogeneity for different temptations to defect. That is, frequency of cooperators peaks at a certain specific value of degree heterogeneity — neither the most heterogeneous case nor the most homogeneous one would favor the cooperators. Besides, the average degree of networks and the adopted update rule also affect the cooperation level.     

Investigation on slot-die coating of hybrid material structure for OLED lightings

With an attempt to fabricate large-area OLED lighting panels, we investigate slot-die coating of a small molecule (SM) hole transport layer (HTL). It is observed that SM HTL films formed by spin coating exhibit pinhole-like surface, whereas the films by slot-die coating show micro-sized hillocks due to agglomeration. As the plate temperature of the slot coater is increased, smaller hillocks appear more densely. To tackle it, a small amount of a polymer HTL is added into the SM HTL (Hybrid HTL). By the aid of entangled polymer chains, small molecules are prohibited from migrating and thus agglomerations disappear. The peak-to-peak roughness of the slot-coated hybrid HTL films is measured to be about 11.5 nm, which is slightly higher than that (~7 nm) of the polymer HTL film, but much lower than that (~1071 nm) of the SM HTL film. Similar results are also observed in spin-coated films. It is also addressed that OLED with the hybrid HTL shows higher luminous efficacy, compared to OLED with the SM HTL or the polymer HTL. We have further demonstrated that the dissolution problem occurring between two stacked layers with different solvents during slot-die coating can be suppressed to a great extent using such a combination of materials in hybrid structure.     

Dielectric properties and study of AC electrical conduction mechanisms by non-overlapping small polaron tunneling model in Bis(4-acetylanilinium) tetrachlorocuprate(II) compound

In the present work, the synthesis and characterization of the Bis(4-acetylanilinium) tetrachlorocuprate(II) compound are presented. The structure of this compound is analyzed by X-ray diffraction which confirms the formation of single phase and is in good agreement the literature. Indeed, the Thermo gravimetric Analysis (TGA) shows that the decomposition of the compound is observed in the range of 420–520 K. However, the differential thermal analysis (DTA) indicates the presence of a phase transition at T=363 k. Furthermore, the dielectric properties and AC conductivity were studied over a temperature range (338–413 K) and frequency range (200 Hz–5 MHz) using complex impedance spectroscopy. Dielectric measurements confirmed such thermal analyses by exhibiting the presence of an anomaly in the temperature range of 358–373 K. The complex impedance plots are analyzed by an electrical equivalent circuit consisting of resistance, constant phase element (CPE) and capacitance. The activation energy values of two distinct regions are obtained from log σT vs 1000/T plot and are found to be E=1.27 eV (T<363 K) and E=1.09 eV (363 K<T).The frequency dependence of ac conductivity, σ_ac, has been analyzed by Jonscher's universal power law σ(ω)=σ_dc+Aω^s. The value of s is to be temperature-dependent, which has a tendency to increase with temperature and the non-overlapping small polaron tunneling (NSPT) model is the most applicable conduction mechanism in the title compound.     

Impact of O2 exposure on surface crystallinity of clean and Ba terminated Ge(1 0 0) surfaces

In analogy with the case of Sr on Si [Y. Liang, S. Gan, M. Engelhard, Appl. Phys. Lett. 79 (2001) 3591], we studied surface crystallinity and oxidation behaviour of clean and Ba terminated Ge(1 0 0) surfaces as a function of oxygen pressure and temperature. The structural and chemical changes in the Ge surface layer were monitored by LEED, XPS and real-time RHEED. In contrast to the oxidation retarding effect, observed for 1/2 monolayer of Sr on Si, the presence of a Ba termination layer leads to a pronounced increase in Ge oxidation rate with respect to clean Ge. In fact, while the Ge(1 0 0) surface terminated with 1/2 ML Ba amorphizes for a pO₂ of 10⁻² Torr, LEED indicates that clean Ge forms a thin (4.5 Å), 1 × 1 ordered oxide upon aggressive O₂ exposure (150 Torr, 200 °C, 30 min). We briefly discuss the origins for the difference in behaviour between Ba on Ge and Sr on Si.     

Molecular depth profiling of polymers with very low energy ions

The need for a molecular depth profiling technique to study organic layers has become a strong incentive in the SIMS community in the last few years, especially with the recent successes obtained with cluster ion beam depth profiling. In this work, we have investigated a thoroughly different approach by using very low energy (down to 200 eV) monoatomic or diatomic ions to sputter organic matter. Quite surprisingly, we were able to retain specific molecular information on various polymers even at very high fluence.Polymethylmethacrylate (PMMA) and polyethylene terephthalate (PET) films were depth-profiled with 200 eV Cs⁺ and 500 eV O₂⁺ ions. With 200 eV Cs ions, the best profiles were obtained in the negative mode, due to a strong negative ionisation yield enhancement related to Cs retention in the polymer. A relatively high and stable signal from the most characteristic ions was measured all over the layer.With 500 eV O₂⁺, real molecular depth-profiles were also obtained in both the positive and the negative modes. Once again, the main characteristic fragments of PET or PMMA remain detectable with stable yields all over the profile.     

Influence of dipole moments on light-emitting features of cardo-type 1H-pyrazolo[3,4-b]quinolines

Several 1H-pyrazolo[3,4-b]quinoline derivatives were synthesized from 9,9′-di(p-aminophenyl)fluorene as possible dye chromophore for the organic light-emitting diodes. All the compounds exhibit strong fluorescence in solution and in solid state as well. The maximally achieved brightness was 65 Cd/m² and spectral range of electroluminescence (EL) covers the wavelength ranges from 420 up to 470 nm. The prepared compounds were used as dye luminophores in poly(N-vinylcarbazole) (PVK) matrix for single-layer EL light-emitting device. Principal goal of the work consists in an establishment of a possibility to operate by their light-emitting features (spectral positions of emitting lines, efficiency of electroluminescence, brightness, etc.) by appropriate changes of state dipole moments of the particular chromophore determined by semi-empirical quantum chemical calculations. The principal physical mechanism of such effects is explained within dipole-dipole interactions between the dye chromophores and PVK polymer chains.