孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料的制备及其高光催化活性

本文报道一种孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料的制备.该介孔材料是以两维六方有序结构、直孔道、锐钛矿70TiO2-30SiO2-950纳米复合介孔材料(于950oC晶化2 h)为前驱体, NaOH为SiO2的刻蚀剂,通过“在孔壁内造孔”的方法获得.我们的策略是采用温和的造孔条件,如稀NaOH溶液,合适的温度与固/液比等.采用X射线衍射(XRD),透射电镜(TEM)和低温N2吸附等技术对样品的介孔结构进行了系统表征.结果表明,墙内孔的密度非常高,孔径均一(平均尺寸3.6 nm),且在三维网络高度连通原孔道,但介孔结构仍保持其完整性.锐钛矿纳米晶粒的结晶度和大小在墙内造孔前后基本保持不变.该材料光催化降解罗丹明B(0.303 min–1)与亚甲基蓝(0.757 min–1)的活性相当高,此活性分别是其母体材料的5.1和5.3倍,甚至是Degussa P25光催化剂的16.5和24.1倍.这充分表明三维连通孔道结构对活性的大幅提高起了关键作用.孔道三维连通式锐钛矿TiO2-SiO2纳米复合介孔材料对上述污染物展现出意想不到的高降解活性,显著高于迄今已报道的金属氧化物基介孔材料对上述污染物的降解活性.更重要的是,该光催化剂具有相当高的稳定性和重复使用性.相信,本方法将为具有超高性能的孔道三维相互连通其它金属氧化物基介孔材料的制备铺平了道路.
　　小角XRD结果表明,母体材料的孔道是两维六方有序结构,在孔壁内造孔之后,样品原有的介孔结构仍保持其规整性.宽角XRD结果显示,二氧化钛的晶相是锐钛矿,晶粒尺寸为10.8 nm.造新孔之后,锐钛矿纳米晶粒的结晶度和大小与母体样品的相比变化不大. TEM结果显示,母体样品的孔壁内没有孔.孔道是两维六方有序排列的直孔道,孔径大小均一(平均尺寸4.1 nm).高分辨透射电镜(TEM)观察揭示,锐钛矿纳米晶粒(平均大小11.3 nm)在孔壁内随机排列,并与无定形SiO2纳米颗粒相互连接,相间共存,形成类似“砖块?水泥砂浆”砌成的孔壁,这种独特的复合骨架结构赋予其很高的稳定性.当一些SiO2纳米颗粒被去除之后, TEM观察显示,孔壁内有密集分布的孔,这些孔取向随机,并在三维方向连通原孔道,但介孔骨架结构仍保持其完整性.墙内孔的大小范围很窄(3.1?4.3 nm),平均大小为3.6 nm.高分辨TEM观察显示,锐钛矿晶粒大小与母体材料内的相比基本未变.上述结果与XRD结果一致.低温N2吸附表征结果显示,母体样品内只有一种孔道,孔径为4.0 nm.去除部分SiO2后的样品内有两种孔道,孔径分别是3.4和4.1 nm.这些结果与TEM的观察吻合.罗丹明B与亚甲基蓝在造孔前后样品内扩散速率评价结果显示,其在三维连通孔道内的扩散速率很高,大约是其母体材料内的5倍以上.这表明相互连通的孔道网络结构非常有利于客体分子在其内扩散.光催化降解性能评价结果显示,罗丹明B与亚甲基蓝在相互连通孔道内降解的速率相当高,分别是其在不连通孔道内的5.1和5.3倍.这充分证明孔道三维相互连通对活性的大幅提高起了关键作用.我们对材料的稳定性和重复使用性作了评价,经过10次循环使用孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料,其吸附与光催化降解罗丹明B的性能变化不大.这充分证明本文制备的孔道连通复合介孔材料的性能是相当稳定的和可重复使用的.该方法可用于制备具有超高性能的孔道三维相互连通其它金属氧化物基介孔材料,如Nb2O5, Ta2O5等.     

超临界流体在有机合成中的应用

超临界化学反应是一种新型的反应体系，本文对超临界流体在有机合成反应中应用的最新进展进行了综述。     

契合生物专业有机化学课堂教学改革与实践

有机化学是生物专业的一门重要基础课,本文以"羰基上的亲核加成反应"教学为例,从激发学生学习兴趣、突破重点难点、实现课程育人等角度出发,提出应结合生物专业特色,强化生物功能分子或生物质成分的化学认知,促进学生学科交叉融合意识的养成,探究了生物专业有机化学课堂教学改革的方法,为培养具备综合创新能力的跨学科人才奠定基础。     

Application of capillary zone electrophoresis for separation of water-soluble gold monolayer-protected clusters

An effective capillary electrophoretic technique for separating samples of negatively charged, polydisperse, water-soluble gold monolayer-protected cluster (Au MPC) protected by monolayers of N-acetyl-L-cysteine has been developed. The separation mechanisms of the Au MPC in CZE suggest that the larger core sizes Au MPC emerge first from the capillary. The electrophoretic separation depends on pH, buffer concentration, and organic modifiers. The addition of aliphatic alcohols to the run buffer can improve the separation of Au MPC by reducing the EOF and changing the selectivity between the Au MPCs. The enhancement of resolution is attributed to the more significant difference in the charge-to-size ratio between the Au MPCs. The run buffer containing 20 v/v % ethanol provides the best separation for water-soluble Au MPC. Our proposed CE method provides a powerful tool to evaluate and separate the water-soluble Au MPC products.     

有机质谱在元素形态分析中的应用

应用于元素形态分析领域的有机质谱已经受到广泛的关注与重视,在环境监控,生物代谢机理研究和毒理药理分析方面都发挥了越来越重要的作用。本文归纳并评述了以有机质谱为基础的方法学在该领域的研究现状,总结了现有研究的特点,分析并展望了这一方法学的发展趋势。     

A Microporous Hydrogen Bonded Organic Framework for Highly Selective Separation of Carbon Dioxide over Acetylene

The separation of acetylene (C₂H₂) from carbon dioxide (CO₂) is a very important but challenging task due to their similar molecular dimensions and physical properties. In terms of porous adsorbents for this separation, the CO₂-selective porous materials are superior to the C₂H₂-selective ones because of the cost- and energy-efficiency but have been rarely achieved. Herein we report our unexpected discovery of the first hydrogen bonded organic framework (HOF) constructed from a simple organic linker 2,4,6-tri(1H-pyrazol-4-yl)pyridine (PYTPZ) (termed as HOF-FJU-88) as the highly CO₂-selective porous material. HOF-FJU-88 is a two-dimensional HOFs with a pore pocket of about 7.6 Å. The activated HOF-FJU-88 takes up a high amount of CO₂ (59.6 cm³ g⁻¹) at ambient conditions with the record IAST selectivity of 1894. Its high performance for the CO₂/C₂H₂ separation has been further confirmed through breakthrough experiments, in situ diffuse reflectance infrared spectroscopy and molecular simulations.     

Boosting CO2 Photoreduction via Regulating Charge Transfer Ability in a One-Dimensional Covalent Organic Framework

Two-dimensional (2D) imine-based covalent organic frameworks (COFs) hold potential for photocatalytic CO₂ reduction. However, high energy barrier of imine linkage impede the in-plane photoelectron transfer process, resulting in inadequate efficiency of CO₂ photoreduction. Herein, we present a dimensionality induced local electronic modulation strategy through the construction of one-dimensional (1D) pyrene-based covalent organic frameworks (PyTTA-COF). The dual-chain-like edge architectures of 1D PyTTA-COF enable the stabilization of aromatic backbones, thus reducing energy loss during exciton dissociation and thermal relaxation, which provides energetic photoelectron to traverse the energy barrier of imine linkages. As a result, the 1D PyTTA-COF exhibits significantly enhanced CO₂ photoreduction activity under visible-light irradiation when coordinated with metal cobalt ion, yielding a remarkable CO evolution of 1003 μmol g⁻¹ over an 8-hour period, which surpasses that of the corresponding 2D counterpart by a factor of 59. These findings present a valuable approach to address in-plane charge transfer limitations in imine-based COFs.     

Electron-phonon and electron-electron interactions in organic field effect transistors

Recent experiments have demonstrated that the performances of organic FETs strongly depend on the dielectric properties of the gate insulator. In particular, it has been shown that the temperature dependence of the mobility evolves from a metallic-like to an insulating behavior upon increasing the dielectric constant of the gate material. This phenomenon can be explained in terms of the formation of small polarons, due to the polar interaction of the charge carriers with the phonons at the organic/dielectric interface. Building on this model, the possible consequences of the Coulomb repulsion between the carriers at high concentrations are analyzed.     

聚合物掺杂的高亮度磷光有机电致发光器件

采用新型贵金属铱的配合物(pbi)2Ir(acac)作为客体磷光发光材料, 分别以4%和5%(w)的浓度掺杂于聚合物主体材料poly(N-vinylcarbazole) (PVK)中, 利用旋涂工艺制备了结构为indium-tin oxide (ITO)/PVK:(pbi)2Ir(acac)/2,9-二甲基-4,7-二苯基-1,10-菲咯啉(BCP)/Mg:Ag的有机电致发光器件, 对磷光材料(pbi)2Ir(acac)的紫外-可见吸收光谱﹑光致发光光谱以及聚合物掺杂的磷光器件的电致发光特性进行了研究. 结果表明, 两种掺杂浓度的器件均具有8 V左右的启亮电压, 器件在启亮后的最大流明效率分别为1.53和1.31 lm·W-1, 最大亮度分别为11210和9174 cd·m-2; 同时, 器件的电致发光光谱与色坐标均不随偏置电压和客体掺杂浓度的变化而改变, 具有稳定的色纯度. 分析了主体材料PVK到磷光客体(pbi)2Ir(acac)的能量转移机制, 并探讨了随着器件电流密度和客体掺杂浓度的逐渐增加, 器件流明效率的变化趋势.