平朔气煤的煤岩显微组分结构研究

用显微光度计、扫描电子显微镜(SEM)、傅立叶变换红外光谱(FTIR)、X射线衍射光谱(XRD)和X光电子能谱(XPS)等测试手段研究了平朔气煤的等密度梯度离心分离(DGC)显微组分富集物的结构。结果表明,镜质组和稳定组结构相似,含氧基团基本相同,但丝质组结构则不同,它含有较多的羧基和羰基。根据实验结果讨论了三种显微组分的大分子结构,认为它们是由许多结构相似而又不相同的结构单元所构成。镜质组和稳定组的单元核心主要为脂环、缩聚芳环,环数为5—6个;丝质组单元核心主要为缩聚芳环,环数为7—8个,环缩合程度最高,芳香层片在空间排列规则,相互定向程度大。     

Enhanced electrodeposition of indium hexacyanoferrate thin films through improved plating solution stability

An ordinary plating solution for indium hexacyanoferrate (InHCF) thin film deposition, mainly composed of equal concentrations of In³⁺ and [Fe(CN)₆]^3–, usually forms precipitates rapidly when either concentration is higher than few millimolar. This contributes to the plating solution's instability. Moreover, electrodeposited capacities are limited accordingly. In this work, the plating solution's stability and the electrodeposition of InHCF were greatly enhanced by adding a large amount of K⁺ and/or H⁺. It was found that a 10-mM plating solution added with 1 M HCl and 1 M KCl could be stored as fresh over a one-week period, whereas an unmodified plating solution became useless within a couple of minutes. Also, such cationic additions, especially adding H⁺, increased the electrodeposited capacity ca. 18 times at least, as compared with that obtained from the unmodified plating solution. Furthermore, related enhancing mechanisms were proposed and verified. To sum up, this study offers a means for better InHCF electrodeposition and should promote the applications of InHCF films. Electronic Publication     

Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

来曲唑的合成、表征及晶体研究

合成了抗癌药物4,4′-(1H-1,2,4-三唑-1-亚甲基)-双-甲苯基氰,测定了其IR, NMR和单晶结构,晶体C17H11N5属单斜晶系,空间群P21/n,晶胞参数:a=0.70300(14) nm, b=1.6170(3) nm, c=1.3360(3) nm, β=104.80(3)°, Z=4.结构解析最终一致性因子R1=0.0897.分子间通过氢键和范德华力形成超分子结构.     

离聚体的结构表征——Ⅴ.含氟离聚体中离子微区稳定性的研究

本文用DSC方法研究了羟酸型含氟离聚体中不同金属离子种类、可离子化基团含量、配位结构单元构型及离子微区大小对离聚体中离子微区稳定性的影响。实验表明:离聚体中金属离子配位能力愈强,羟酸含量愈高,离子微区尺寸愈大,则相应离聚体中离子微区稳定性愈大。铅高聚体>锌离聚体>钙离聚体>钠离聚体。     

导电性聚西佛碱的研究：Ⅰ含硫聚西佛碱的合成,性能及表征

采用对氯苯甲醛和联苯二胺为原料,合成了4,4′-二氯代苄叉联苯胺,发现该化合物具有热致液晶性。利用所合成的二氯代化合物与硫化钠在醋酸锂催化下缩取得得到了含硫聚西佛碱探讨了高分子量含硫聚西佛碱的合成方法。测出该含硫聚西佛碱具有3.4×10~(-11)S/cm本征导电率。使用红外光谱、元素分析等方法表征了所合成的聚合物。     

Supercritical fluid chromatography of industrial paraffins and waxes

Summary The application of capillary SFC for SIMDIST investigations of paraffins and waxes is reported. Pressure, density and temperature of the mobile phase are optimized to obtain high chromatographic resolution of complex mixtures of industrial products. Isothermal linear pressure programming and asymptotic pressure and density programming are used in the range from 15 to 35 MPa in the isothermic mode above 100°C. SFC chromatograms of natural and synthetic paraffins, microcrystalline wax and candle wax are compared. The retention behaviour of paraffin mixtures and waxes has been investigated on methyl/phenyl and biphenyl capillary columns. The polarity of the stationary phases influences the absolute retention time more than it influences the chromatographic resolution.     

Thermal characterization of social vespid silk

In this paper we try to establish a link between the microclimate in the wasp nest and the structure and thermal stability of vespid silk. We suggest that there are at least two types of water that is absorbed by the silk of Oriental hornets, namely, surface water and intrinsic structural water. The release of both types of water was found to be reversible. The enthalpy values of the endothermic peaks associated with the release of water from different silk samples do not differ substantially and are in the range of 106 to 130 J g^-1 for the Vespa orientalis male larvae silk (sample #1), Paravespula germanica (yellowjacket) worker larvae silk (#3) and Vespa orientalis nest envelope(#4). For the Vespa orientalis worker larvae silk (sample #2), however, it is twice as large (228 J g^-1). This is in agreement with the increased total amount of absorbed water. The silk studied has a fibrilar structure with interconnecting surfaces overlying entire regions. It is assumed that the initial water loss stems from water evaporation from the coat of the fibers - a daily occurrence in the hornets' nest. Heating to above 70°C may result in structural changes in the silk core. This revised version was published online in July 2006 with corrections to the Cover Date.     

活泼配盐[(μ-RE)(μ-E′)Fe_2(CO)_6][Et_3NH][E,E′=S,Se]的亲电反应研究——蝶状Fe_2SSe及Fe_2Se_2簇合物的合成及表征

本文由［（μｔＢｕＳ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硒粉形成的［（μｔＢｕＳ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］，分别与溴化苄，二碘甲烷及邻一、间一、对一双（溴甲基）苯反应，合成了蝶状Ｆｅ２ＳＳｅ单簇物（μｔＢｕＳ）（μＰｈＣＨ２Ｓｅ）Ｆｅ２（ＣＯ）６（３ａ）和双簇物［（μｔＢｕＳ）Ｆｅ２（ＣＯ）６］２（μＳｅＺＳｅμ）［Ｚ＝ＣＨ２，ｏ．ｍ．ｐ双（亚甲基）苯］（４ａｄ）。类似地，由［（μＰｈＳｅ）（μＣＯ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］和硫粉或硒粉所形成的［（μＰｈＳｅ）（μＳ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］或［（μＰｈＳｅ）（μＳｅ）Ｆｅ２（ＣＯ）６］［Ｅｔ３ＮＨ］分别与对一双（溴甲基）苯反应合成了蝶状Ｆｅ２ＳＳｅ和Ｆｅ２Ｓｅ２双簇物［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳ（ｐＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓμ］（５ａ）及［（μＰｈＳｅ）Ｆｅ２（ＣＯ）６］２［μＳｅ（ＰＣＨ２Ｃ６Ｈ４ＣＨ２）Ｓｅμ］（５ｂ）。所有产物均经元素分析、ＩＲ和１ＨＮＭＲ表征。     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.