Optical spectroscopy of Yb/Er codoped NaY(WO4)2 crystal

Erbium and ytterbium codoped double tungstates NaY(WO₄)₂ crystals were prepared by using Czochralski (CZ) pulling method. The absorption spectra in the region 290-2000 nm have been recorded at room temperature. The Judd-Ofelt theory was applied to the measured values of absorption line strengths to evaluate the spontaneous emission probabilities and stimulated emission cross sections of Er³⁺ ions in NaY(WO₄)₂ crystals. Intensive green and red lights were measured when the sample were pumped by a 974 nm laser diode (LD), especially, the intensities of green upconversion luminescence are very strong. The mechanism of energy transfer from Yb³⁺ to Er³⁺ ions was analyzed. Energy transfer and nonradiative relaxation played an important role in the upconversion process. Photoexcited luminescence experiments are also fulfilled to help analyzing the transit processes of the energy levels.     

Correction of self-absorption spectral line and ratios of transition probabilities for homogeneous and LTE plasma

Expressions for fundamental spectral line parameters are reported for Gaussian and Lorentzian shape profiles for homogeneous plasma at equilibrium in presence of the self-absorption. These expressions for Lorentzian profiles are applied to the determination of the ratios of transition probabilities and the ratios of optical thicknesses by a new method that we propose in this article. The self-absorption is computed by spectral line profiles with a Simplex algorithm program fitting. Applications to some experimental lines illustrate the appropriate corrections.     

超大规模集成电路光学光刻技术的现状与展望

光学光刻是目前超大规模集成电路(VLSI)制备中主要的微米和亚微米的图形加工技术,这一技术将继续保持其主导地位成为90年代VLSI发展的关键。本文综述了近年来光学光刻工艺的发展,主要介绍了G线(436nm)、Ⅰ线(365nm)和准分子激光光刻的现状,并对实现高的光学光刻分辨率所必须解决的透镜设计、套准精度和像场面积等问题作了详细描述。最后展望了发展方向、     

经纬仪二轴正交调整方法

本文叙述了经纬仪二轴正交调整的四种方法,其中对偏反射镜法作了理论分析。     

高速电视摄象系统的象质评价和动态计测精度

本文对高速摄象系统(包括电视摄象系统和光机式摄象系统)的象质评价方法予以讨论,并用实验方法对目前广泛使用的Kodak SP-2000、NAC HSV-200等高速电视摄象系统及我们自己开发的一维扫描电视摄象系统的象质,在新的定义下给出了评价,对它们的动态精度作了对比性测试,同时和光机式高速摄象系统作了比较。     

Hydrodynamic cavitation for micropollutant degradation in water – Correlation of bisphenol A degradation with fluid mechanical properties

The present work addresses the correlation of bisphenol A (BPA) degradation by hydrodynamic cavitation with the fluid mechanical properties of the cavitating jet in the reactor. The effects of inlet pressure and two orifices were investigated. The fluid mechanics conditions during the reaction were evaluated by optical measurements to determine the jet length, bubble volume, number of bubbles, and bubble size distribution. In addition, chemiluminescence of luminol is used to localize chemically active bubbles due to the generation of hydroxyl radicals in the reactor chamber. The correlation between the rate constants of BPA degradation and the mechanical properties of the liquid is discussed. Here, linear dependencies between the degradation of BPA and the volume expansion of the bubble volume and chemiluminescence are found, allowing prediction of the rate constants and the hydroxyl radicals generated. BPA degradation of 50% was achieved in 30 min with the 1.7 mm nozzle at 25 bar. However, the 1 mm nozzle has been demonstrated to be more energetically efficient, achieving 10% degradation with 30% less power per 100 passes. There is a tendency for the number of small bubbles in the reactor to increase with smaller nozzle and increasing pressure difference.     

数字束流位置探测器通道自动增益校准方法的研究与实现

在现有硬件基础上,基于BPM测量准确度的需求,在自制的电子学FPGA芯片内,通过Verilog语言实现了一种数字BPM采样数据增益自动校准的设计。首先介绍了自动增益校准模块的系统总体设计;然后对模块的实现方法做了详细说明,设计并搭建了ADC数据自动增益校准测试平台以验证自动增益较准模块的功能;最后介绍了该设计在BPM通道标定中的应用。实验结果表明,该方法可以实现4通道增益一致,使ADC采样后的数据幅度相同,有效解决了由通道增益不一致引起的测量偏差,以及工程应用中ADC数据幅度校准工作量大且难于操作的问题,将在BPM系统通道自动标定中发挥重要作用。     

Characterization of inner layer thickness change of a composite circular tube using nonlinear circumferential guided wave:A feasibility study

The feasibility of using the nonlinear effect of primary circumferential guided wave (CGW) propagation for characterizing the change of inner layer thickness of a composite circular tube (CCT) has been investigated. An appropriate mode pair of the fundamental and double-frequency CGWs (DFCGWs) has been selected to enable the second harmonics of primary wave mode in the given CCT to accumulate along the circumferential direction. When changes in the inner layer thickness (described as the equivalent inner layer thickness) take place, the corresponding nonlinear CGW measurements are conducted. It is found that there is a direct correlation between change of equivalent inner layer thickness of the CCT and the relative acoustic nonlinearity parameter (Δβ) measured with CGWs propagating through one full circumference, and that the effect of second-harmonic generation (SHG) is very sensitive to change in the inner layer thickness. The experimental result obtained demonstrates the feasibility for quantitatively assessing the change of equivalent inner layer thickness in CCTs using the effect of SHG by primary CGW propagation.     

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric down-conversion in the periodically-poled lithium niobate on insulator (LNOI) waveguide. We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum, such as narrowing, broadening, and splitting. We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth. Our study may promote the development of on-chip photon sources in the LNOI platform, as well as opens up a way to engineer photon frequency state.     

直流磁控溅射厚度对Cu(Inx,Ga1-x)Se2背接触Mo薄膜性能的影响

采用直流磁控溅射工艺, 在一定条件下通过控制溅射时间, 在钠钙玻璃上制备了不同厚度的用于Cu(In_x, Ga_1-x)Se₂薄膜太阳电池背接触材料的Mo薄膜, 并利用X射线衍射 (XRD)、场发射扫描电子显微镜 (SEM)、四探针测试仪、台阶仪研究了厚度对溅射时间、薄膜微结构、电学性能及力学性能的交互影响. Mo薄膜的厚度与溅射时间呈线性递增关系; 随厚度的增大, Mo薄膜 (110) 和 (211) 面峰强均逐渐增大, 择优生长从(110)方向逐渐向 (211)方向转变, 方块电阻值只随 (110) 方向上的生长而急剧减小直到一特定值约2 Ω/⇑, 电导率随薄膜的 (110) 择优取向程度的降低而线性减小直到一特定值约0.96×10^-4 Ω·cm; Mo薄膜内部是一种多孔的长形簇状颗粒和颗粒间隙交织的结构, 并处于拉应力态, 其内部应变随薄膜厚度的增大而减小. 关键词： Mo薄膜 CIGS背接触 厚度 微结构