Computer simulation of some dynamical properties of the Lorentz gas

We carried out molecular dynamics simulations of a Lorentz gas, consisting of a lone hydrogen molecule moving in a sea of stationary argon atoms. A Lennard-Jones form was assumed for the H₂-Ar potential. The calculations were performed at a reduced temperatureK ^* =kT/_{H 2–Ar} = 4.64 and at reduced densities ^*= _{Ar Ar} ³ in the range 0.074–0.414. The placement of Ar atoms was assumed to be random rather than dictated by equilibrium considerations. We followed the trajectories of many H₂ molecules, each of which is assigned in turn a velocity given by the Maxwell-Boltzmann distribution at the temperature of the simulation. Solving the equations of motion classically, we obtained the translational part of the incoherent dynamic structure factor for the H₂ molecule,S _tr(q, ). This was convoluted with the rotational structure factorS _rot(q, ) calculated assuming unhindered rotation to obtain the total structure factorS(q, ). Our results agree well with experimental data on this function obtained by Egelstaffet al. At the highest density ( ^*=0.414) we studied the dependence ofS(q, ) on system size (number of Ar atoms), number of H₂ molecules for which trajectories are generated, and the length of time over which these trajectories are followed.     

实现20Gbit/s的OTDM孤子信号56km色散位移光纤的传输

在国内最先采用孤子的方式将8×2.5Gb/s的OTDM信号在色散位移光纤中传输了56.1km,对8×2.5Gb/s的OTDM进行解复用后进行了误码测量,系统功率代价为2.9dB.系统采用增益开关半导体激光器作光孤子源,高Q电滤波方式提取时钟,非线性光学环路镜解复用。孤子脉冲最大半宽度为20ps,传输光纤平均色散1.2ps/nm/km。     

强激光装置中玻璃疵病在线检测的光学系统设计

介绍了一种用于玻璃疵病在线检测的近摄工作距成像光学系统,其光组结构形式采用了光阑后置的准远心结构形式,主要光学参量为f′=14 mm;在物像距为250 mm约束条件下,物方视场达到90 mm（对角线）;F/number=3.56;光谱适应范围为400~800 nm,对应的空间分辨率为100 lp/mm时,调制传递函数大于0.29.     

气体和气溶胶在多孔介质中迁移的数值模拟

为了研究多孔介质对气体和气溶胶的封闭能力,用数值方法模拟了气体和气溶胶在多孔介质中的迁移.考虑了渗透、吸附过滤、扩散、热传导等因素,在柱对称坐标下用双孔双渗模型进行了数值模拟,并与实验结果进行了比较.计算结果显示,多孔介质对气溶胶有较强的阻挡作用,模拟实验结果也证明了这一点.     

Concentric-ring structures in an atmospheric pressure helium dielectric barrier discharge

This paper performs a numerical simulation of concentric-ring discharge structures within the scope of a two-dimensional diffusion--drift model at atmospheric pressure between two parallel circular electrodes covered with thin dielectric layers. With a relative high frequency the discharge structures present different appearances of ring structures within different radii in time due to the evolvement of the filaments. The spontaneous electron density distributions help understanding the formation and development of self-organized discharge structures. During a cycle the electron avalanches are triggered by the electric field strengthened by the feeding voltage and the residual charged particles on the barrier surface deposited in the previous discharges. The accumulation of charges is shown to play a dominant role in the generation and annihilation of the discharge structures. Besides, the rings split and unify to bring and annihilate rings which form a new discharge structure.     

Stationary states of crystal growth in three dimensions

A new Markov process describing crystal growth in three dimensions is introduced. States of the process are configurations of the crystal surface, which has a terrace-edge-kink structure. The states are continuous along edges but discrete across edges, in accordance with the very different rates for the two types of captures of particles. Stationary distributions, describing steady crystal growth, are found in general. To our knowledge, these are the first examples of stationary distributions for layered crystal growth in three dimensions. The steady growth rate and other quantities are obtained explicitly for two interacting edges. For many interacting edges, growth behavior is determined (a) in various asymptotic regimes including thermodynamic limits, (b) via simulations, and (c) using series (cluster) expansions in the slope of the surface, the first three coefficients being computed. The theoretical growth rates show a marked dependence on surface dimensions. This may contribute to the size dependence and dispersion in the observed growth rate of small crystals.     

Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

40 Gbps OFDM-PON系统采用偏振复用技术实现上行链路传输(英文)

为了提高PM-CO-OFDM-PON系统中上行数据的传输速率,提出采用偏振复用结构与相干检测技术相结合,通过光载波源方式实现上行链路光网络单元无色化传输的技术方案.利用光学软件VPI和Matlab,搭建了基于偏振复用技术的40Gb/s PM-CO-OFDM-PON系统仿真平台,结果表明:该方案可有效提高PM-CO-OFDM-PON系统中上行数据传输速率,并实现光网络单元无色化;利用相干检测比直接检测可以更高地提高接收端的灵敏度.     

光锥导光装置耦合效率分析与测试

介绍了光锥导光装置的优势,分析了影响光锥导光装置耦合效率的主要因素,得出了影响光锥导光装置耦合效率的理论模型误差曲线。以光锥端面反射损耗及光纤辐射损耗为主要误差源,测试了光锥导光装置的耦合效率及误差对耦合效率的影响;采用分光比标定的方法测量导光装置的耦合效率,消除了由于激光器输出能量变化给试验中脉冲能量测量环节带来的影响;根据试验测量数据,拟合出误差对耦合效率的影响曲线,通过与理论误差曲线进行对比,验证了理论模型的正确性,同时测得该耦合装置的耦合效率为70．26％。在激光束的入射角度误差〈5°,且在光纤耐受弯折允许范围内甩动光纤的情况下,总误差对耦合效率的影响〈10％,满足实际工程误差的允许范围。该耦合装置已经应用到实际工程中。     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。