Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

Protease sensors for bioimaging

Optical imaging of specific molecular targets and pathways in vivo has recently become possible through continued developments in imaging equipment, reconstruction algorithms, and more importantly the availability of imaging reporter molecules. These reporter molecules encompass photoproteins expressed in vivo and exogenously administered probes detectable by fluorescence and/or bioluminescence imaging. One particularly enticing aspect of optical imaging is the ability to design activatible probes with inherent amplification. This review summarizes our experience in developing novel near-infrared fluorescent (NIRF) imaging agents that report on protease activities. These agents are designed to be biocompatible, highly activatible, and able to produce bright NIRF following protease cleavage.     

Optical sensors for determination of heavy metal ions

A review is given on optical means for single shot testing (probing) as well as continuous monitoring (sensing) of heavy metal ions (HMs). Following an introduction into indicator based approaches, we discuss the types of indicator dyes and polymeric supports used, as well as existing sensing schemes for HMs. The wealth of information is compiled in the form of tables and critically reviewed. Notwithstanding the tremendous work performed so far, it is obvious that still severe limitations do exist in terms of selectivity, limits of detection, dynamic ranges, applicability to specific problems, and reversibility. On the other hand, such sensors have found — and will find — their application whenever rapid and cost-effective testing is required, where personnel is scarce or unskilled, and in field tests. Despite their limitations, the number of such sensors (and of irreversible probes) for HMs is likely to increase in future.     

Optical Spectroscopy Properties of KMgF3 ：Eu^2＋ Nanocrystals and Powder Synthesized by Microemulsion and Solvothermal Process

IntroductionPerovskite complex fluorides have attracted great ainterest due to their particular physical properties, suchas piezoelectric characteristics[1], ferromagnetic prop-erty[2], nonmagnetic insulator behavior[3], and photo-luminescence host functi…     

Chemical Sensors for Electronic Nose Systems

Chemical sensors have been widely used for the analysis of volatile organic compounds. Employing chemical sensors in an array format with pattern recognition provides a higher degree of selectivity and reversibility leading to an extensive range of applications. When such systems are used for odour analysis they are termed electronic noses. Application of electronic noses ranges from the food industry, medical industry to environmental monitoring and process control. Many types of different gas sensors have been employed in the array. These include conducting polymers, metal oxide semiconductors, piezoelectric, optical fluorescence and amperometric gas sensors The transducer principle of these sensors is varied and is discussed in detail within this review. Examples of the current trends in sensor array technology as well as the applications to which the sensor-based noses have been applied are also discussed.     

The photoluminescence of Co-Al-layered double hydroxide

We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH).It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated.Its excitation spectrum shows a maximum peak near the wavelength 370nm,the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue.This new optical property will be expected to extend the potential applications of LDHs in optical materials field.     

Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.     

Nanoparticles: scaffolds for molecular recognition

Monolayer and mixed-monolayer protected clusters (MPCs and MMPCs) have great potential to combine molecular functionality with the intrinsic properties of nanometer-sized scaffolds. This synergy can be used to create complex functional devices, including redox-active, electronic, or magnetic storage devices, solution-based sensors, and highly efficient catalysts. This review outlines some of the recent developments in nanoscale receptors based on synthetic and nonbiological recognition elements. In these nanoparticle systems, molecular recognition is achieved by covalent attachment of receptors on the nanoparticles coupled with noncovalent interactions to target substrates. Synthetic host-guest systems, hydrogen bonding, change in redox states, pi-pi stacking, rotaxane formation, and ion recognition are the main topics covered in this review.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 1. Voltammetric e-tongue for the determination of oxidizable compounds

A sequential injection analysis (SIA) system was developed with the aim of obtaining an automatic and versatile way to prepare standards needed in the study of systems with higher dimensional sensor signals. To illustrate this, different analytical techniques were used in determinations of several analytes. Automated potentiometric calibrations of different potentiometric sensors, with and without interference, were carried out. Useful determinations of selectivity coefficients with two degrees of freedom were obtained. Simultaneous voltammetric determinations have also been done. Firstly, simultaneous determinations of lead and cadmium, using epoxy-graphite composite as the working electrode, have enabled a separate calibration for each metal to be obtained. Next, a voltammetric electronic tongue was designed and applied to the determination of oxidizable species. The use of artificial neural networks has solved the overlapped signal of ascorbic acid, 4-aminophenol and 4-acetamidophenol (paracetamol). A set of 63 data points was prepared automatically and has facilitated the training of an electronic tongue for these three analytes. Accurate predictions of test solutions, in the range of 12–410 μM for ascorbic acid, 17–530 μM for 4-aminophenol and 10–420 μM for paracetamol, have been achieved with RMSEs lower than 0.10 μM.