Growth of oxide thin films for optical gas sensor applications

Tungsten trioxide and titanium dioxide thin films were synthesised by pulsed laser deposition. We used for irradiations of oxide targets an UV KrF* (λ = 248 nm, τ_FWHM ≅ 20 ns, ν = 2 Hz) excimer laser source, at 2 J/cm² incident fluence value. The experiments were performed in low oxygen pressure. The (0 0 1) SiO₂ substrates were heated during the thin film deposition process at temperature values within the 300-500 °C range. The structure and crystalline status of the obtained oxide thin films were investigated by high resolution transmission electron microscopy. Our analyses show that the films are composed by nanoparticles with average diameters from a few to a few tens of nm. Moreover, the films deposited at substrate temperatures higher than 300 °C are crystalline. The tungsten trioxide films consist of a mixture of triclinic and monoclinic phases, while the titanium dioxide films structure corresponds to the tetragonal anatase phase. The oxide films average transmittance in the visible-infrared spectral range is higher than 80%, which makes them suitable for sensor applications.     

Absorbance spectra of polycrystalline samples and twinned crystals of oligothiophenes

We propose optical absorption technique at oblique incidence as one of the spectroscopic tools that allow experimentally recognizing the macroscopic order and structural features of molecular solids of conjugated molecules, from single crystals to polycrystalline or twinned samples. We apply this spectroscopy to quaterthiophene as representative of a wide class of materials that usually possess optical transitions of Frenkel exciton origin with strong directional dispersion. The comparison between experimental and simulated data gives evidence of the high sensitivity of this technique for determining quantitatively the polycrystallinity of the measured samples, whose domains may show mirror-like orientation of the unit cell with respect to one of its faces.Frenkel exciton; Oligothiophene, Optical properties     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

Investigation of the Doughnut Effect in Cy3-Labeled Protein Microarrays using Scanning Near-Field Optical Microscope

We demonstrate the fluorescence mapping of protein microarrays by the technique of scanning near-field optical microscopy (SNOM) and confocal microscopy. Micron sized spots (300 μm) of human Immunoglobulin G (hIgG) protein with and without a Cy3 dye labeling have been fabricated on glass substrates by an immobilization method which makes use of calixcrown derivatives termed Prolinker. We have also tried to probe into the well-known “doughnut effect” observed in fluorescence images of proteins using the SNOM technique. The topographic and fluorescence SNOM images revealed that the number of proteins at the boundary of the spot were more than at the center in the case of the microarray spot which showed brighter luminescence at the edge than at the center in the confocal image.     

Fiber Optical Bragg Grating Refractometer

We have demonstrated an evanescent field refractive indexfiber sensor comprising a 42-mm Bragg grating in an etched fiber together with a tunable Distributed Bragg Reflector (DBR) laser. Characterization of different aqueous sucrose solutions resulted in a resolution of roughly 10 mM sucrose. The sensor in the presented form has a theoretical sensitivity of higher than 10 5 refractive index unit (riu) in a refractive index region close to the cladding index of the fiber. However, the technique allows for an even higher sensitivity than 10 6 riu with a proper signal processing scheme.     

The Micro-Theory of Ultra-Short Pulse Propagating in Nonlinear Fiber

The modified quantum nonlinear Schrodinger equation of ultra-short pulse propagating in fiber is derived using dispersion relation and the Hamiltonian of the transmission system. The derived equation is solved with linearization approximation, and modulation instability is analyzed. The equation is also solved with Hartree approximation. The results indicate that pulse power, loss and self-steeping effect change the critical frequency, the maximum gain and the gain spectrum range, but the third order dispersion has no effect on modulation instability. The expectation value of optical field is average of a set of modified classical solitons, and higher order terms change the amplitude, pulse position and phase of soliton.     

锁相电子散斑系统

电子散斑干涉计量在变形量检测¹、无损探伤、振动分析^(2,3)等领域具有广泛的应用前景,目前它之所以未能实用化,最重要的原因就是该系统对环境的要求过高,特别是物体的振动和空气的扰动对测量结果影响很大,甚至会导致测量失败,因而国内外学者在不断寻找解决此问题的锁相技术。本文提出了一种简易的切实可行的锁相方法-光学锁相法,消除了物体的振动和空气扰动对电子散斑测量的影响。     

Solid-state interactions and drug release of teicoplanin in binary combinations with peracetylated α-, β-, and γ-cyclodextrins

Triacetyl α-cyclodextrin, triacetyl β-cyclodextrin and triacetyl γ-cyclodextrin were tested as possible hydrophobic carriers to prolong the release of hydrophilic teicoplanin (TCP). Physical–chemical characterization of individual components, drug-carrier physical mixtures at 0.5, 0.67 and 0.75 mass fraction of carrier, and the respective interaction products by kneading or evaporative crystallization under microwave irradiation was carried out using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In vitro drug release in pH 7.4 phosphate buffer at 37 °C was determined by intrinsic dissolution rate (IDR) measurements on non disintegrating compressed discs. Solid-state interactions of TCP with triacetyl α-cyclodextrin by evaporative crystallization and kneading and with triacetyl β-cyclodextrin by evaporative crystallization (probably resulting in carrier amorphization) were demonstrated. The role of carrier hydrophobicity, carrier mass fraction and preparation method of solid drug-carrier combinations on solid-state drug-carrier interactions and slowing down of TCP release was assessed. Modulation of drug release can be achieved using TCP-triacetyl γ-cyclodextrin combinations at 0.5 mass fraction of carrier.     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.