CDMA蜂窝移动通信系统中的无线资源管理算法研究

无线资源管理是CDMA蜂窝移动通信系统保证业务质量(QoS)和提高频谱利用率的关键技术，本文提出了CDMA系统中无线资源管理算法的一般模型，阐述了三种重要的无线资源管理算法，即功率控制算法、呼叫接纳控制算法和分组调度算法的主要研究情况，并分析了目前研究中仍然存在和需要解决的问题。     

A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

Absorption measurement of strained SiGe nanostructures deposited by UHV-CVD

In order to obtain a low band gap photocell based on the widely spread silicon technology, e.g. for thermophotovoltaics, SiGe nanostructures can be introduced into a monocrystalline silicon photocell. Beforehand, it is necessary to know the absorption coefficient of the SiGe quantum wells. On a silicon (1 0 0) substrate multiple Si/SiGe quantum well structures were grown by UHV-CVD. The Ge concentration and the well width were used as growth parameters. To obtain significant absorption, the experiment was set up to allow for 200 internal reflections.The total reflection of the light results in a standing electromagnetic wave. The absorption coefficient was obtained from the experimental data taking the geometry and the electric field distribution in the absorbing layer into account. The influence of well width and germanium content on the absorption was investigated with the goal of maximizing the absorption for photons with energies below the band gap energy of silicon. The measurement results are compared with a theoretical model, which takes the band structure of strained SiGe including confinement effects into account.     

Novel optical film sensor design based on p-polarized reflectance

A new scheme of optical film sensor is presented. The sensor is based on p-polarized reflectance, consisting of a sensing coated substrate, is easily optimized for maximum sensitivity in different applications. The resolutions of refractive index n_f, extinction coefficient k_f and thickness h_f of the sensitive films are predicted to be 10⁻⁷, 10⁻⁵ and 10⁻³ nm, respectively. Experimentally, we selected the sol–gel derived SnO₂ films as gas-sensitive films and conducted preliminary gas-sensing test. The results indicate that novel optical film sensor scheme has higher sensitivity, and the detection sensitivity is available to 10⁻¹ ppm on the condition of optimum optical parameters and incident angle.     

Measurement of wire diameter by optical diffraction

A combined interference and diffraction pattern, in the form of equidistant interference fringes, resulting from illuminating a vertical metallic wire by a laser beam is analyzed to measure the diameter of four standard wires. The diameters range from 170 to 450 μm. It is found that the error in the diameter measurements increases for small metallic wires and for small distances between the wire and the screen due to scattering effects. The intensity of the incident laser beam was controlled by a pair of sheet polaroids to minimize the scattered radiation. The used technique is highly sensitive, but requires controlled environmental conditions and absence of vibration effects. The expanded uncertainty for k=2 is calculated and found to decrease from U(D)=±1.45 μm for the wire of nominal diameter 170 μm to ±0.57 μm for the diameter 450 μm.     

高速电视摄象系统的象质评价和动态计测精度

本文对高速摄象系统(包括电视摄象系统和光机式摄象系统)的象质评价方法予以讨论,并用实验方法对目前广泛使用的Kodak SP-2000、NAC HSV-200等高速电视摄象系统及我们自己开发的一维扫描电视摄象系统的象质,在新的定义下给出了评价,对它们的动态精度作了对比性测试,同时和光机式高速摄象系统作了比较。     

方位伺服系统扭转振动固有频率的分析

本文阐述了伺服系统结构设计中估算系统固有频率的必要性,介绍了一种分析和计算经纬仪方位伺服系统扭转振动固有频率的方法。     

Circularly polarized light-induced electrogyration in the Au nanoparticles on the ITO

We have found that the gold nanoparticles on the ITO substrates might be considered promising materials for circularly polarized light-induced linear electrogyration (EG). The maximal achieved value of the EG susceptibility described by third-order axial tensor caused by probe circularly polarized light at a wavelength of 1060 nm was equal to about 13 deg/mm at pulsed electric field strength 30.0 V/cm with a duration of about 1 ms. We have revealed that the maximal EG coefficient is achieved for the samples possessing maximal resistivity. The investigated composites possess long-lived EG grating which decreases by not more than 12% after 120 min of laser treatment. Applying a non-circular pump light leads to the diminishing of the observed EG.     

An amylopectin tris(phenylcarbamate) chiral stationary phase for high performance liquid chromatography

Amylopectin tris(phenylcarbamate) has been evaluated as a chiral stationary phase for HPLC; the influence on its cptical resolving capabilities of mobile phase composition and nature of the alcohol used as modifier has been studied. Separation and resolution of twelve arylalcohol racemates were examined. In most instances, the stationary phase exhibited high optical resolving capacity.     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.