Absorbance spectra of polycrystalline samples and twinned crystals of oligothiophenes

We propose optical absorption technique at oblique incidence as one of the spectroscopic tools that allow experimentally recognizing the macroscopic order and structural features of molecular solids of conjugated molecules, from single crystals to polycrystalline or twinned samples. We apply this spectroscopy to quaterthiophene as representative of a wide class of materials that usually possess optical transitions of Frenkel exciton origin with strong directional dispersion. The comparison between experimental and simulated data gives evidence of the high sensitivity of this technique for determining quantitatively the polycrystallinity of the measured samples, whose domains may show mirror-like orientation of the unit cell with respect to one of its faces.Frenkel exciton; Oligothiophene, Optical properties     

Fiber Optical Bragg Grating Refractometer

We have demonstrated an evanescent field refractive indexfiber sensor comprising a 42-mm Bragg grating in an etched fiber together with a tunable Distributed Bragg Reflector (DBR) laser. Characterization of different aqueous sucrose solutions resulted in a resolution of roughly 10 mM sucrose. The sensor in the presented form has a theoretical sensitivity of higher than 10 5 refractive index unit (riu) in a refractive index region close to the cladding index of the fiber. However, the technique allows for an even higher sensitivity than 10 6 riu with a proper signal processing scheme.     

The Micro-Theory of Ultra-Short Pulse Propagating in Nonlinear Fiber

The modified quantum nonlinear Schrodinger equation of ultra-short pulse propagating in fiber is derived using dispersion relation and the Hamiltonian of the transmission system. The derived equation is solved with linearization approximation, and modulation instability is analyzed. The equation is also solved with Hartree approximation. The results indicate that pulse power, loss and self-steeping effect change the critical frequency, the maximum gain and the gain spectrum range, but the third order dispersion has no effect on modulation instability. The expectation value of optical field is average of a set of modified classical solitons, and higher order terms change the amplitude, pulse position and phase of soliton.     

聚合物微腔的研制及其特性分析

采用ＢＭＰＰＶ：ＰＶＫ的混合物作国源介质，将其按一定比例溶于氯仿中，并旋涂在具有９９．５％的反射率的ＤＢＲ上，其上蒸发３００ｎｍ的银膜，形成了面发射型微腔结构，其中ＤＢＲ在入射腔面，银膜为反射腔面，在激发波长３３７．１ｎｍ，频率２０Ｈｚ脉宽１０ｎｓ的氮分子激光器泵浦下，光谱明显等窄化，出现４６０ｎｍ和５３０ｎｍ两个比较强的发光峰，主峰国４６０ｎｍ半宽度为７ｎｍ。     

锁相电子散斑系统

电子散斑干涉计量在变形量检测¹、无损探伤、振动分析^(2,3)等领域具有广泛的应用前景,目前它之所以未能实用化,最重要的原因就是该系统对环境的要求过高,特别是物体的振动和空气的扰动对测量结果影响很大,甚至会导致测量失败,因而国内外学者在不断寻找解决此问题的锁相技术。本文提出了一种简易的切实可行的锁相方法-光学锁相法,消除了物体的振动和空气扰动对电子散斑测量的影响。     

Chemical Reactions in the Manufacture of Waveguides for Long Distance Optical Data Transmission

One of the modern high technologies which has advanced enormously in the last few years is glass fiber technology. This is used in the manufacture of glass fibers for lighting purposes and for the optical transfer of analog and digital data with a high transfer density. The technical demands made on the glass fibers required for data transfer, the optical waveguides, are extremely high and are already fulfilled to a large extent by industry. At present about four million kilometers of fiber, worth ca. 800 million DM are produced worldwide (10% in the Federal Republic of Germany). Numerous chemical processes take place during the manufacture of optical waveguides. However, in contrast both to the high and constantly growing demands on the quality and to the increasing production volume of such fibers, little is in fact known about the reactions involved. The present article will attempt to develop a picture of the multifarious reactions occurring in the course of this technical process on the basis of literature data and our own studies.     

Study of migration of active components of phosphorescent oxygen sensors for food packaging applications

A study of migration of the active components of oxygen sensors into food is presented. Six types of sensors, based on different oxygen sensitive dyes (two metalloporphyrins and one ruthenium dye), polymers (polystyrene and polysulfone) and support materials, were exposed to a number of standard ‘food simulants’ recommended by FDA/EU guidelines and then assayed for migration or sensor components and changes in oxygen calibration. Both metalloporphyrin sensor dyes leached only in olive oil and in 95% ethanol (used as a positive control), at maximum levels of 19.22 μg/dm² for PtOEPK and 113.96 μg/dm² for PtTFPP. The RuDPP dye showed maximum leaching in 95% ethanol (25.19 μg/dm²) while also migrating in an acidic aqueous simulant. Planar supports such as polyester tended to enhance the stability of the sensor. Migration of the styrene monomer from the polystyrene encapsulation medium was concluded to be low enough to be insignificant. Migration of sensor components was shown to correlate with the changes in sensor response to oxygen. Based on these results, sensor combinations were ranked on the basis of their resistance to leaching and their general stability, safety and suitability for use on a large scale in packaged foods and related food applications was proven.     

Resolution of enantiomers by HPLC on cellulose derivatives

Summary Various polysaccharide derivatives, particularly cellulose derivatives, were synthesized and used as chiral stationary phases for optical resolution by HPLC after being adsorbed on macroporous silica gel. Cellulose triacetate (CTA-II), which was synthesized under homogeneous conditions, showed a chiral recognition ability for many racemates. Other cellulose derivatives such as cellulose tribenzoate (OB), cellulose-trisphenylcarbamate (OC), cellulose tribenzyl ether (OE), and cellulose tricinnamate (OK) also showed unique chiral recognition. Among other polysaccharide derivatives, curdlan triacetate was also exhibited an effective chiral recognition. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

胆甾液晶／聚合物多组分体系的结构与性能研究（Ⅲ）──ChN／poly（MMA－CO－BMA）混合体系的形态结构

应用Ｘ射线衍射、偏光显微镜及电子显微镜研究了胆甾液晶与甲基丙烯酸甲酯（ＭＭＡ）─甲基丙烯酸丁酯（ＢＭＡ）无规共聚物共混体系的形态结构。研究了体系的结晶态及液晶态的行为和共聚物含量及组成对光学织构的影响。     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.