氮化硼纳米管-纳米片分级结构的制备及光学和吸附特性

将五硼酸铵、 氨硼烷络合物和氧化镁混合, 球磨均匀后, 在1200 ℃及0.6 L/min流动氨气保护条件下退火6 h, 即可在氧化铝基片上收集到白色毛状产物. 采用X射线衍射(XRD), 红外光谱(FTIR)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱(Raman)、 紫外-可见吸收光谱(UV-Vis)和荧光光谱(PL)对产物进行了表征. 结果表明, 样品呈一维线状分级结构, 长度大于5 mm, 中间为竹节状空心结构, 内部管径为50~350 nm, 外径范围为200~800 nm. 分级结构表面负载了大量氮化硼(BN)纳米薄片, 单个薄片厚度约为13 nm. 薄片弯曲褶皱, 相互交织, 构成1个氮化硼片层, 其厚度约为50~200 nm. UV-Vis和PL光谱测试结果表明, 氮化硼纳米管(BNNT)分级结构在紫外光材料领域具有一定的应用潜力, 且对亚甲基蓝具有良好的吸附能力(7 min即可吸附71%, 107 min时可吸附96%). 对比实验结果表明, BNNT的生长机理遵循气-液-固相(VLS)模型, 而表面负载的超薄BN片的生长机理遵循气-固相(VS)模型.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.     

Optical manipulation of charged microparticles in polar fluids

In this study, we report a systematic study of the response of a charged microparticle confined in an optical trap and driven by electric fields. The particle is embedded in a polar fluid, hence, the role of ions and counterions forming a double layer around the electrodes and the particle surface itself has been taken into account. We analyze two different cases: (i) electrodes energized by a step‐wise voltage (DC mode) and (ii) electrodes driven by a sinusoidal voltage (AC mode). The experimental outcomes are analyzed in terms of a model that combines the electric response of the electrolytic cell and the motion of the trapped particle. In particular, for the DC mode we analyze the transient particle motion and correlate it with the electric current flowing in the cell. For the AC mode, the stochastic and deterministic motion of the trapped particle is analyzed either in the frequency domain (power spectral density, PSD) or in the time domain (autocorrelation function). Moreover, we will show how these different approaches (DC and AC modes) allow us, assuming predictable the applied electric field (here generated by plane parallel electrodes), to provide accurate estimation (3%) of the net charge carried by the microparticle. Vice versa, we also demonstrate how, once predetermined the charge, the trapped particle acts as a sensitive probe to reveal locally electric fields generated by arbitrary electrode geometries (in this work, wire‐tip geometry).     

Friedel-Crafts Polymers. 8. Friedel-Crafts Polycondensation of β-Resorcylic Acid or Resorcinol with p-Xylylene Dichloride,p,p′-Dichloromethyldiphenyl Ether,and p,p′-Dichloroacetyldiphenyl Ether

Friedel-Crafts polycondensation of β-resorcylic acid (BRA) with p-xylylene dichloride (PXDC) or 4,4′-dichloromethyldiphenyl ether (DDE) in dioxane could be effected without simultaneous decarboxylation of BRA. The similar polycondensation of BRA with PXDC, DDE, or 4,4′-dichloroacetyldiphenyl ether (DADE) in nitrobenzene or in the absence of solvent at 150°C was associated with decarboxylation of BRA. Polymers having structures isomeric with those of the polycondensation product of BRA formed with subsequent in situ decarboxylation were prepared by Friedel-Crafts polycondensation of resorcinol with the above dichlorides. All the polymer samples were characterized, and those with related structures were compared. The ion-exchange properties of the polymer sample prepared from BRA and DDE in dioxane were studied.     

Viscometric Estimation of Unperturbed Chain Dimensions of Polymers

A new expression is proposed to determine the unperturbed dimensions of coil-like polymers viscometrically by use of the Flory and Kratky expression. The unperturbed dimensions so estimated are compared with the results obtained by using different expressions available in the literature. The results are comparable even for stiff chain polymers. The data obtained under theta conditions also fit this expression very well. The effect of molecular weight, its distribution, and that of the solvent has also been studied. It is concluded that the unperturbed dimensions are independent of molecular weight and solvent but depend on the heterogeneity of the system.     

Monitoring nitrite with optical sensing films

A new, low-cost nitrite sensor was developed by immobilizing a direct indicator dye in an optical sensing film for food and environmental monitoring. This sensor was fabricated by binding Safranine O to a cellulose acetate film that had previously been subjected to an exhaustive base hydrolysis. The membrane has good durability (>12 months) and a short response time (<8 s). Nitrite can be determined for the range of 0.005-2.00 μg ml⁻¹ with 3δ detection limits of 0.001 μg ml⁻¹. The method is easy to perform and uses acetylcellulose as a carrier. The reagents used for the activity of the cellulose support are inexpensive, non-toxic and widely available.     

Synthesis and evaluation of nitrated poly(4-hydroxystyrene) microspheres for pH sensing

Lightly crosslinked nitrated poly(4-hydroxystyrene) microspheres were prepared for pH sensing. The first step is to prepare poly(4-acetoxystyrene) microspheres using porous glass membrane emulsification followed by suspension polymerization. The resulting microspheres have diameters between 1 and 2 μm. They hydrolyzed to poly(4-hydroxystyrene) by exposing them to base. This is followed by nitration to nitric acid. The percentage of nitrogen depends on the nitration conditions. Percentages greater than the theoretical percentage for mononitro poly(4-hydroxystyrene) can be obtained at elevated temperatures indicating partial dinitration. These microspheres were cast into hydrogel membranes for use as pH sensors. The membrane is turbid because the refractive index of the microspheres is higher than the hydrogel refractive index. At high pH, deprotonation of the hydroxyl group introduces a negative charge onto the polymer backbone causing it to swell. Swelling is accompanied by a decrease in microsphere refractive index, which is detected as a decrease in membrane turbidity.     

New HPLC-chiral stationary phases for enantiomeric resolution of sulfoxides and selenoxides

Summary Enantiomers of several sulfoxides and some selenoxides can be easily separated by using a new chiral stationary phase (CSP-DACH-DNB) containing the 3,5-dinitrobenzoyl derivative of R,R-(-)1,2-diamino-cyclohexane as selector, covalently bonded to the siliceous matrix. The easy operative conditions and the high enantioselectivity values (α) allow a direct transfer of the analytical separations to a semi-preparative and preparative scale.     

Extraction and characterization of highly pure alumina (α, γ, and θ) polymorphs from waste beverage cans: A viable waste management approach

The recycling and recovery of important materials from inexpensive feedstock has now become an intriguing area and vital from commercial and environmental viewpoints. In the present work, extraction of different single phases of alumina (α, γ, θ-Al₂O₃) having high purity (>99.5 %) from locally available waste beverage cans (～95 % Al) through facile precipitation route calcined at distinct temperatures has been reported. The optimization of process technology was done by a variety of different synthesis parameters, and the production cost was estimated between 84.47-87.45 USD per kg of alumina powder. The as prepared alumina fine particles have been characterized using different sophisticated techniques viz. TG-DTA, WD-XRF, XRD, FT-IR, SEM, DLS-based particle size analysis (PSA) with zeta (ζ) potential measurement and UV–Visible Spectroscopy. X-ray diffractogram confirms the formation of γ-, θ-, and α-alumina at 500–700 °C, 900–1000 °C, and 1200 °C respectively and crystallite size, crystallinity, strain, dislocation density, and specific surface area were measured using major X-ray diffraction peaks which varies with temperature. The SEM studies showed that the as prepared alumina particles were agglomerated, irregular-shaped with particle size (0.23–0.38 µm), pore size, and porosity were calculated from SEM image. ζ-potentials at different pH values as well as isoelectric point (IEP) of α, γ, and θ alumina were calculated in an aqueous medium which changes with temperature. The direct band gap (E_g) energies were found between 4.09 and 5.19 eV of alumina obtained from different calcination temperatures. The synthesized materials can be used in sensors, ceramics, catalysis, and insulation applications.     

Perfectly Encoding π-Conjugated Anions in the RE5(C3N3O3)(OH)12 (RE=Y,Yb, Lu) Family with Strong Second Harmonic Generation Response and Balanced Birefringence

Nonlinear optical (NLO) crystal, which simultaneously exhibits strong second-harmonic-generation (SHG) response and desired optical anisotropy, is a core optical material accessible to the modern optoelectronics. Accompanied by strong SHG effect in a NLO crystal, a contradictory problem of overlarge birefringence is ignored, leading to low frequency doubling efficiency and poor beam quality. Herein, a series of rare earth cyanurates RE₅(C₃N₃O₃)(OH)₁₂ (RE=Y, Yb, Lu) were successfully characterized by 3D electron diffraction technique. Based on a “three birds with one stone” strategy, they enable the simultaneous fulfillment of strong SHG responses (2.5–4.2× KH₂PO₄), short UV cutoff (ca. 220 nm) and applicable birefringence (ca. 0.15 at 800 nm) by the introduction of rare earth coordination control of π-conjugated (C₃N₃O₃)³⁻ anions. These findings provide high-performance short-wavelength NLO materials and highlight the exploration of cyanurates as a new research area.