能动抛光磨盘的变形实验研究

 能动抛光磨盘实时产生不同的表面变形，在对大口径非球面光学元件进行精磨和抛光时实现与工件表面良好的大尺寸吻合，可以消除传统光学加工采用小尺寸磨头时带来的高频残余误差并提高加工效率。以加工直径1.3m左右，F/2的抛物面光学元件为例，对能动磨盘在不同离轴度时能够产生的变形进行了计算和实验。结果表明，能动磨盘能够以较高精度产生旋转对称或非对称的抛物面形状。对能动磨盘产生变形后的残余误差进行了分析。     

平行光栅对在刻线不平行时的色散研究

 利用三维空间光线追迹法，分析了啁啾脉冲放大系统中的压缩光栅对，在刻线不平行而光栅面平行时光的衍射特性。导出了此时光通过光栅对的群延时，数值计算了系统2阶和3阶色散量，以及这些色散量在光栅对严格平行时的相对误差。得出了中心波长光的接收位置相对于光栅对严格平行时的偏移量，并且分析了它与入射角的变化关系。     

束变换环孔激光谐振腔的环束场传输差分计算

 通过使用新的坐标变量和光场的表达形式，推导了新坐标系下环束场传输的偏微分方程，给出了相应差分方程的截断误差和稳定性条件，使得环束场传输计算速度大幅提高；使用二阶精度的Crank-Nicolso差分方法对束变换环孔激光谐振腔的环束场传输进行了计算，并与W.D.Murphy和M.L.Bernabe所给M-B积分近似方法的计算结果进行了比较，证实了该方法无论计算速度和精度都优于M-B积分近似方法。     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

高能闪光照相中影响光程确定的几个因素

 利用闪光照相基本原理和成像原理，在直接记录法和转换屏记录法的情况下，研究了闪光照相中影响X射线在材料中光程确定的主要因素。结果表明，影响光程确定的几个因素是：散射效应、光源角分布效应、立体角效应和能谱效应。对于高能闪光照相，散射效应是影响光程确定的最主要因素，散射的存在使光程的测量值比实际值降低20%～40%。因此必须在做CT之前，对散射的影响进行修正。     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.     

Synthesis,growth and characterization of non-linear optical material: l-Tryptophan p-nitrophenol (LTPNP) single crystal

A new nonlinear optical organic crystal l-tryptophan p-nitrophenol (LTPNP) of dimension 19 mm × 2 mm × 1.5 mm has been grown from an aqueous solution for the first time by slow evaporation technique at ambient temperature. The crystal structure of LTPNP was confirmed by single crystal X-ray diffraction. LTPNP crystallizes in non-centrosymmetric monoclinic system with space group P₂₁. The recorded FTIR spectrum confirms the presence of various functional groups in the grown crystal and confirms the formation of LTPNP. Thermal stability and melting temperature of the LTPNP crystal were identified from TG/DTA analysis. The optical absorption study confirms the suitability of the crystal for device applications. LTPNP exhibits SHG efficiency over 1.7 orders of magnitude higher than that of urea and 4 orders of magnitude higher than that of KDP.     

An investigation on visible luminescence of Ho activated LBTAF glasses

Different concentrations of Ho³⁺-doped lead borate titanate aluminum fluoride (LBTAFHo) glasses with chemical composition of PbO-H₃BO₃-TiO₂-AlF₃-Ho₂O₃ were prepared by the melt quenching method. The spectral properties were investigated using the absorption, emission and decay measurements. The experimental oscillator strengths were calculated from the area under the absorption bands. Applying Judd-Ofelt theory, the intensity parameters (Ω_{λ=2, 4, 6}) were calculated, by the least square fit approach from which the radiative transition rates, luminescence branching ratios and radiative decay times were determined. The photoluminescence spectra revealed the quenching of luminescence intensity beyond 1.0 mol% of Ho³⁺ ion concentration. To investigate the luminescence potentiality of ⁵F₄→⁵I₈ emission level, the effective bandwidth and the stimulated emission cross-section were determined. The quenching in experimental decay time is attributed to the resonance energy transfer among the excited Ho³⁺ ions.     

Optical constants of silver and copper indium ternary sulfides from infrared reflectivity measurements

Infrared reflection spectra are obtained in the frequency range of 50–2000 cm⁻¹ for AgIn₅S₈ and CuIn₅S₈ single crystals grown by Bridgman method. All four infrared-active modes are detected, which are in full agreement with the prediction of group-theoretical analysis. Spectral dependence of optical parameters; real and imaginary parts of the dielectric function, the function of energy losses, refractive index, absorption index and absorption coefficient were calculated from reflectivity experiments. The frequencies of transverse and longitudinal optical modes and oscillator strengths were also determined. The bands detected in IR spectra of studied crystals were assigned to various vibration types (valence and valence-deformation) on the basis of the symmetrized displacements of atoms obtained employing the Melvin projection operators.