Molecular weight effect on the photoinduced birefringence and surface relief gratings formation of a methacrylate azopolymer

Samples of a methacrylic side-chain azopolymer were synthesized by a radical copolymerization of methyl-methacrylate with the methacrylic derivative of the commercial dye Disperse Red-13 (DR13). Copolymers with different molecular weight were obtained by varying the reaction time and the concentration of initiator. Samples with molecular weight averages (M_w) from 3 to 8 × 10⁴ g/mol and 1.4-1.7 polydispersity were obtained. The glass transition temperature of the samples increased linearly from the lower to the highest molecular weight. Optical quality cast films were prepared for all samples and photoinduced birefringence was successfully carried out in all samples as well as surface relief gratings could be inscribed in the cast films.     

5,6—二亚甲基双环[2.2.1]庚—2—醇及其衍生物的旋光与构型

从（－）－（１Ｓ，２Ｒ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ｉ）和（－）－（１Ｓ，２Ｓ，４Ｓ）－５，６－二亚甲基双环［２．２．１］庚－２－醇（Ⅱ）出发，合成了它们的醚类和取代苯甲酸酯类光学纯的衍生物。通过［α］Ｄ测定和构型分析，发现它们是含有３个手性碳（Ｃ１，Ｃ２和Ｃ４）的桥环化合物，其旋光性与构型的关系均符合可极化度多级圆球不对称性模型。     

JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

LLDPE/纳米SiO_2复合材料的力学性能和光学性能研究

采用熔融共混方法制备了LLDPE 纳米SiO2 复合材料 ,并对该体系的力学性能和光学性能进行了系统研究 .结果表明 ,随着纳米SiO2 的加入 ,复合材料的弹性模量显著提高 ,冲击强度与拉伸强度呈峰形变化 ,且均在SiO2 含量为 3phr左右达到最大值 .加入少量的纳米SiO2 后 ,复合材料薄膜对长波红外线 (7～ 1 1 μm)的吸收能力较LLDPE膜有了显著提高 ,透光率略有下降但雾度提高 ,透光质量得到改善 .同时表明 ,纳米SiO2 的表面处理方法对膜的光学性能有显著影响     

A PMMA composite as an optical diffuser in a liquid crystal display backlighting unit (BLU)

The effect of thermo-physical properties, relative humidity and stiffness on the warpage of a poly(methyl methacrylate) (PMMA) diffusing plate modified with glass fibers in a direct-lit backlight unit (BLU) of a liquid crystal display (LCD) was investigated. The warpage of the PMMA diffusing composites modified with a glass fiber were significantly reduced relative to that of a conventional PMMA diffusing plate. Luminance and scattering characteristics of the PMMA diffusing composites having 5, 10, 20 vol% of glass fibers were measured. Although the luminance of the composite was lowered as increasing the volume fractions of glass fibers in the PMMA composites, good brightness uniformity of the composites on a light source was obtained.     

具可调光学性质的富勒烯聚合物

聚（Ｃ６０ 甲基丙烯酸甲酯）与聚（Ｃ６０ 苯乙烯）的ＴＨＦ溶液的透射光谱随浓度的增大而不断红移．这种异常的光谱位移可能与富勒烯的纳级（１０－９）簇的形成有关．用简单的办法来“调改”一物质的性质是科学家们长期梦寐以求的，而含Ｃ６０的聚合物正代表了这一群新奇的物质，它们的光学性质可以预期地和可逆地调变，只要简单改变一下浓度．     

Spectrophotometric determination of dopamine in microliter scale using microfluidic system based on polymeric technology

In this paper we report two simple and sensitive spectrophotometric procedures for the determination of dopamine in microfluidic system based on poly(dimethylsiloxane) (PDMS) technology and comparison of their interference-susceptibility. The analytical reactions and measurements were carried out at ambient temperature in a microreactor of total volume 6 μl coupled with a spectrophotometric flow-through cuvette.     

Crystallization and second harmonic generation in thermally poled niobium borophosphate glasses

Crystallization of glasses with compositions (1−x)(0.95 NaPO₃+0.05 Na₂B₄O₇)+xNb₂O₅, x=0.4, 0.43, 0.45, 0.48 was investigated by differential scanning calorimetry and X-ray powder diffraction. Crystallization of two phases was observed in the glasses with x=0.43-0.48. First phase is a sodium niobate with the structure of tetragonal tungsten bronze () and second phase is Na₄Nb₈P₄O₃₂ (). The crystallization of sodium niobate is correlated with increasing of nonlinear optical efficiency reported for thermally poled glasses with x>0.4. The results of Raman spectroscopy show the formation of three-dimensional (3D) niobium oxide framework in the glasses with increase of niobium concentration. This framework is supposed to have tetragonal tungsten bronze structure and to be responsible for nonlinear optical properties of the glass. Second harmonic generation signals of as prepared and crystallized glass after thermal poling are compared. The nucleation and crystallization do not improve the NLO properties of the glasses under study.     

Synthesis, band structure, and optical properties of Ba2ZnV2O8

A novel compound Ba₂ZnV₂O₈ has been synthesized in high temperature solution reaction and its crystal structure has been characterized by means of single crystal X-ray diffraction analysis. It crystallizes in monoclinic system and belongs to space group P2₁/c with a=7.9050(16), b=16.149(3), , β=90.49(3). It builds up from 1-D branchy chains of [ZnV₂O₈⁴⁻]_∞, and the Ba²⁺ cations are located in the space among these chains. The IR spectrum, ultraviolet-visible diffuse reflection integral spectrum and fluorescent spectra of this compound have been investigated. The calculated results of energy band structure by the density functional theory method show that the solid-state compound of Ba₂ZnV₂O₈ is an insulator with direct band gap of 3.48 eV. The calculated total and partial density of states indicate that the top valence bands are contributions from the mixings of O-2p, V-3d, and Zn-3d states and low conduction bands mostly originate from unoccupied antibonding states between the V-3d and O-2p states. The V-O bonds are mostly covalence characters and Zn-O bonds are mostly ionic interactions, and the ionic interaction strength is stronger between the Ba-O than between the Zn-O. The refractive index of n_x, n_y, and n_z is estimated to be 1.7453, 1.7469, and 1.7126, respectively, at wavelength of 1060 nm for Ba₂ZnV₂O₈ crystal.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.