正方分布的4×4单模光纤熔锥耦合器耦合特性分析

本文以线性耦合波方程为基础,采用散射矩阵的方法讨论了具有正方分布的4×4单模光纤熔锥形耦合器的耦合特性,并与实验作了比较,得到了比较一致的结果。     

单晶光纤损耗谱测量装置

本文描述了一套用以测量单晶光纤损耗谱的装置。本装置由卤钨灯,单色仪,积分球,AgORbCs光电倍增管以及数据采集,处理和控制系统组成。可测量300～1150nm的光谱范围。利用本装置可获得单晶光纤的吸收光谱,透过率谱,散射光谱以及散射位置谱。     

一种用单模光纤制作亚微米周期光栅的方法

本文报道一种用单模光纤制作亚微米周期光栅的全息方法,并详细分析和讨论了影响光栅质量的各种因素。实践证明这一方法完全适于制作面积不小于10×10mm~2适于集成光学元件需要的高质量光栅。     

纳秒脉冲放电紫外光纤阵列检测与定位方法

峰化电容作为电磁脉冲模拟器中用于陡化脉冲输出的关键部件,在实际工程应用中易发生沿面放电和击穿现象,采用光电检测系统可对绝缘沿面放电现象进行有效分析。针对峰化电容器沿面放电监测的技术难题,研制了一套绝缘沿面放电过程光电检测系统,对绝缘沿面放电现象进行光电检测。首先提出了绝缘介质沿面放电过程光电探测系统的设计方案;其次,对系统的时延性能进行了评价;最后,完成了绝缘介质沿面放电过程定位实验,验证了光电探测系统的可行性。实验表明,该系统能够实现对放电区域的有效定位。     

Optomechanical-organized multipulse dynamics in ultrafast fiber laser

A novel organized multipulse pattern and its birth dynamics under strong optomechanical effect in microfiber-assisted ultrafast fiber laser are investigated in this work. The background pulses are observed to obviously exhibit selectively amplifying self-organized process of evolving into quasi-stable equidistant clusters. The radio frequency spectrum of the multipulse pattern displays a harmonic mode-locking-like behavior with a repetition rate of 2.0138 GHz, corresponding to the frequency of torsional-radial (TR_2m) acoustic mode in microfiber. The results show the evidence of optomechanical effect in dominating the birth dynamics and pattern of multipulse.     

A low-threshold multiwavelength Brillouin fiber laser with double-frequency spacing based on a small-core fiber

We demonstrate multiwavelength Brillouin fiber lasers (MWBFLs) with double-frequency spacing based on a small-core fiber (SCF) and a standard single-mode fiber (SMF), which have core diameters of 5 and 8.8 μm, respectively. Experimental results show that the SCF-based MWBFL exhibits a higher laser output power and a lower pump threshold. The output powers of the SCF-based MWBFL are > 1.4 times those of the SMF-based MWBFL. Moreover, the threshold power required to generate each channel of the SCF-based MWBFL is 59% that of the SMF-based MWBFL. When the same pump power of 180 mW is injected, the number of laser channels generated for the SCF-based MWBFL is 13, which is twice that generated for the SMF-based MWBFL. In addition, the SCF-based MWBFL exhibits good wavelength tunability from 1535 to 1565 nm and temporal stability over an hour.     

Tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber

Optical fiber temperature sensors have been widely employed in enormous areas ranging from electric power industry, medical treatment, ocean dynamics to aerospace. Recently, graphene optical fiber temperature sensors attract tremendous attention for their merits of simple structure and direct power detecting ability. However, these sensors based on transfer techniques still have limitations in the relatively low sensitivity or distortion of the transmission characteristics, due to the unsuitable Fermi level of graphene and the destruction of fiber structure, respectively. Here, we propose a tunable and highly sensitive temperature sensor based on graphene photonic crystal fiber (Gr-PCF) with the non-destructive integration of graphene into the holes of PCF. This hybrid structure promises the intact fiber structure and transmission mode, which efficiently enhances the temperature detection ability of graphene. From our simulation, we find that the temperature sensitivity can be electrically tuned over four orders of magnitude and achieve up to ～ 3.34×10^-3 dB/(cm·℃) when the graphene Fermi level is ～ 35 meV higher than half the incident photon energy. Additionally, this sensitivity can be further improved by ～ 10 times through optimizing the PCF structure (such as the fiber hole diameter) to enhance the light-matter interaction. Our results provide a new way for the design of the highly sensitive temperature sensors and broaden applications in all-fiber optoelectronic devices.     

量子点单光子源的光纤耦合

半导体量子点在低温下产生谱线细锐的激子发光可制备单光子源.光纤耦合可避免低温共聚焦装置扫描定位和振动影响,是实现单光子源即插即用和组件化的关键技术.在耦合工艺上,基于微区定位标记发展出拉锥光纤与光子晶体腔或波导侧向耦合、大数值孔径锥形端面光纤与量子点样片垂直耦合等技术;然而,上述工艺需要多维度精密调节以避免柔软光纤的畸形弯曲实现对准和高效耦合.陶瓷插针或石英V槽封装的光纤无弯曲且具有大平滑端面,只要与单量子点样片对准贴合就可保证垂直收光, V槽封装的排式光纤还可通过盲对粘合避免扫描对准,耦合简单.本文在前期排式光纤粘合少对数分布Bragg反射镜(distributed Bragg reflector, DBR)微柱样片实现单光子输出基础上,经理论模拟采用多对数DBR腔提升样片垂直出光和光纤收光效率,使光纤输出单光子计数率大大提升.     

新型单模大模场红外硫系玻璃光子晶体光纤设计研究

大模场光子晶体光纤在高功率激光传输、光纤放大器、光纤激光器中的广泛应用, 使其受到研究者的广泛关注.硫系玻璃在红外波段(1–20μm)具有优良透过性能, 且具有折射率高(2.0–3.5)、声子能量低(小于350 cm^-1)、 组分可调等特性, 成为制备红外光纤的理想材料. 本文设计一种基于Ge₂₀Sb₁₅Se₆₅硫系玻璃基质的新型单模传输、低损耗、超大模场面积光子晶体光纤结构, 经理论验证其在λ =10.6 μm处基模限制损耗远低于0.1 dB/m, 高阶限制模损耗大于2 dB/m, 模场面积约为13333 μm². 关键词： 硫系玻璃 大模场面积 红外光子晶体光纤 结构设计     

全光纤量子通信系统中的高速偏振控制方案

偏振控制在光通信中是至关重要的技术, 关系着通信系统的稳定性和误码率. 本文提出一种基于双向Sagnac环工作方式的全光纤高速偏振控制方案, 通过调节环中一个光纤电光相位调制器的相位差而精确控制光场偏振方向, 并且实现了单个端口输出各种偏振态, 无需后续耦合操作. 相位控制精度为10^-3 rad, 最大消光比可达30 dB, 工作速率可达2 GHz. 由于本方案的精度、调制速度和稳定性都很高, 并采用了器件简单、成本低廉的全光纤光路, 易于集成, 在量子保密通信等光通信领域中有很好的应用前景. 关键词： 光纤偏振控制器 Sagnac环 量子通信