New method for determination of trihalomethanes in exhaled breath: Applications to swimming pool and bath environments

A method for the estimation of the human intake of trihalomethanes (THMs), namely chloroform, bromodichloromethane, dibromochloromethane and bromoform, during showering and bathing is reported. The method is based on the determination of these compounds in exhaled breath that is collected by solid adsorption on Tenax using a device specifically designed for this purpose. Instrumental measurements were performed by automatic thermal desorption coupled to gas chromatography with electron capture detection. THMs in exhaled breath samples were determined during showering and swimming pool attendance. The levels of these compounds in indoor air and water were also determined as reference for interpretation of the exhaled breath results. The THM concentrations in exhaled breath of the volunteers measured before the exposure experiments showed a close correspondence with the THMs levels in indoor air where the sampler was located. Limits of detection in exhaled breath were dependent on THM analytes and experimental sites. They ranged between 170 and 710 ng m⁻³ in the swimming pool studies and between 97 and 460 ng m⁻³ in the showering studies. Application of this method to THMs determination during showering and swimming pool activities revealed statistically significant increases in THMs concentrations when comparing exhaled breath before and after exposure.     

Stochastic quantum molecular dynamics for finite and extended systems

We present a detailed account of the technical aspects of stochastic quantum molecular dynamics, an approach introduced recently by the authors [H. Appel, M. Di Ventra, Phys. Rev. B 80 (2009) 212303] to describe coupled electron-ion dynamics in open quantum systems. As example applications of the method we consider both finite systems with and without ionic motion, as well as describe its applicability to extended systems in the limit of classical ions. The latter formulation allows the study of important phenomena such as decoherence and energy relaxation in bulk systems and surfaces in the presence of time-dependent fields.     

Analysis of phospholipids using an open‐tubular capillary column with a monolithic layer of molecularly imprinted polymer in capillary electrochromatography‐electrospray ionization‐tandem mass spectrometry

In this study, an open‐tubular capillary electrochromatography (OT‐CEC) column with a monolithic layer of molecularly imprinted polymer (MIP) based on methacrylic acid, ethylene glycol dimethacrylate, and 4‐styrenesulfonic acid was utilized for the simultaneous separation and characterization of phospholipid (PL) molecular structures by interfacing with electrospray ionization‐tandem mass spectrometry (ESI‐MS‐MS). Introducing an MIP‐based monolith along with charged species at the OT column made it possible to separate PL molecules based on differences in head groups and acyl chain lengths in CEC. For the interface of OT‐CEC with ESI‐MS‐MS, a simple nanospray interface utilizing a sheath flow was developed and the resulting OT‐CEC‐ESI‐MS‐MS was able to separate PL standards (phosphatidylserines, phosphatidylethanolamines, phosphatidylglycerols, phosphatidic acid, and lysophosphatidylglycerols). The developed method was applied to human urinary lipid extracts, and resulted in the separation and structural identification of 18 molecules by data‐dependent collision‐induced dissociation.     

Preparation and characterization of a polystyrene/bovine serum albumin nanoparticle‐coated capillary for chiral separation using open‐tubular capillary electrochromatography

Polystyrene (PS) nanoparticles coated by BSA, hereafter denoted as PS/BSA, were prepared and chemically immobilized for the first time onto a capillary inner wall for open‐tubular CEC (OTCEC). EOF and scanning electron micrography were used to characterize the prepared nanoparticle‐coated capillaries. To investigate the performance of the prepared columns in OTCEC, chiral separation of d ,l ‐tryptophan (dl ‐Trp) was performed in monolayer BSA‐modified capillary and PS/BSA nanoparticle‐coated columns. The results indicated that the nanoparticle‐modified column afforded a higher resolution compared with the monolayer type. Rapid enantioseparation of dl ‐Trp (within 3 min) was achieved with the PS/BSA‐immobilized column using an electroosmotic pump‐assisted CEC. Enantiomer separations of other compounds like dl ‐tyrosine and warfarin were also achieved with the column. Besides, run‐to‐run and column‐to‐column repeatabilities of the PS/BSA‐coated column in the chiral separation were systematically introduced.     

铜在3%NaCl溶液中腐蚀行为的光电化学研究

Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中．自然Cu的腐蚀和防腐成为人们很关注的问题．人们已经注意到，Cl-对Cu的腐蚀有影响，并进行过一些研究．但目前使用光电化学方法研究这一问题的文章尚不多见，特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到．本文正是利用如上方法及XPS，AES方法，研究了Cl-对Cu电极腐蚀的全过程，取得了一些有意义的结果．1实验方法Cu电极用99．99％（质量分数）的Cu制成，面积约为39mm2；电极底部由Cu导线焊接引出，…     

光学活性化合物的工业合成

本文介绍了光学活性化合物研究现状及发展趋势。并从技术和经济角度论述了工业合成光学活性化合物的可能性     

2,4-二氧代-1,3,2-苯并二氮磷杂环己烷与■C=C■及CS_2加成反应的研究

本文研究了2,4-二氧代-1,3,2-苯并二氮磷杂环己烷的磷氢键对β-硝基苯乙烯、丙烯酸酯、丙烯腈及二硫化碳的加成反应,共合成了18个新的加成产物.发现通过选用不同的碱或控制碱的用量.可选择性的进行加成或开环反应.由X衍射证实:在加成产物的结构中,环外P-C键构象因受磷杂环船式构象影响,以邻位交叉式(A)为主.     

Capillary electrophoresis as a tool for screening aptamer with high affinity and high specificity to ricin

Aptamers which specifically recognize targets are selected from random oligonucleotide library using systematic evolution of ligands by exponential enrichment (SELEX). In this paper, capillary electrophoresis (CE) as a separation approach has been introduced to SELEX procedure. The high efficiency of CE gives rise to greatly shorten the selection procedure. The results from enzyme-linked assay and dot blot experiment show that an enrichment pool has been obtained after four rounds selection, which can specifically recognize ricin. __________ Translated from Chemical Journal of Chinese Universities, 2006, 27(10): 1,840–1,843 [译自: 高等学校化学学报]