Determination of phenols by HPLC down to PPT levels

Summary A mixture of eleven priority pollutant phenols (PPP) have been separated using a Dionex 4000 chromatograph; VAL-U-PAK ODS (250 × 4.6 mm I.D.) column; eluents A: CH₃CN/0.2M NaH₂PO₄/CH₃COOH 40/60/1 and B: CH₃CN with/without gradient; detectors: UV-254 nm and Pulse Amperometric Detector (PAD) with glassycarbon electrode (+1.20V). With preconcentration unit (guard RP-18 column) on line and PAD, detectability limit at ten ppt was achieved. The method has been applied for determination of PPP in tap-water and in leachates from sanitary and industrial landfill sites.     

On-line isotachophoretic preconcentration and gel electrophoretic separation of sodium dodecyl sulfate-proteins on a microchip

A microchip for integrated isotachophoretic (ITP) preconcentration with gel electrophoretic (GE) separation to decrease the detectable concentration of sodium dodecyl sulfate (SDS)-proteins was developed. Each channel of the chip was designed with a long sample injection channel to increase the sample loading and allow stacking the sample into a narrow zone using discontinuous ITP buffers. The pre-concentrated sample was separated in GE mode in sieving polymer solutions. All the analysis steps including injection, preconcentration, and separation of the ITP-GE process were performed continuously, controlled by a high-voltage power source with sequential voltage switching between the analysis steps. Without deteriorating the peak resolution, four SDS-protein analyses with integrated ITP-GE system resulted in a decreased detectable concentration of approximately 40-fold compared to the GE mode only. A good calibration curve for molecular weights of SDS-proteins indicated that the integrated ITP-GE system can be used for qualitative analysis of unknown protein samples.     

On-line multi-bed sorption trap for VOC analysis of large-volume vapor samples: injection plug width, effects of water vapor and sample decomposition

A multibed on-line sorption trap is used to preconcentrate organic vapors from air samples and inject the analytes into a GC separation column. Injection plug widths depend on the boiling point for the lipophilic compounds and on the polarity and boiling point for the polar compounds. Injection plug widths are sufficiently small (0.7-0.8 s) as to allow the direct injection of the most volatile compounds into the GC column without the need for a second focusing device. The presence of water in the samples has an effect on the retention of polar compounds by the trap. However, this effect is reproducible for a fixed water content and so can be overcome by using calibration standards under the same conditions of humidity as the samples. The thermal decomposition of many volatile organic compounds in an on-line sorption trap during the GC analysis of air samples is examined. The results show that degradation of unstable compounds is governed by the amount of heat transferred to the compounds during desorption (i.e., applied temperature and pulse duration). The use of an on-line trap results in the immediate transfer of desorbed compounds to the analytical column, which can reduce the formation of artifacts.     

A new selective method for dimethylamine in water analysis by liquid chromatography using solid-phase microextraction and two-stage derivatization with o-phthalaldialdehyde and 9-fluorenylmethyl chloroformate

A new method is presented for the determination of DMA in water as its 9-fluorenylmethyl chloroformate (FMOC) derivative using solid-phase microextraction (SPME) and liquid chromatography. The method is based on the employment of SPME fibres coated with carbowax-templated resin (CW-TR) for analyte extraction and derivatization. The fibres were successively immersed in the samples, in a solution of o-phthalaldialdehyde and N-acethyl-l-cysteine (OPA–NAC) and finally, in a solution of FMOC. OPA–NAC reacted on the fibre with possible primary aliphatic amines present in the samples, particularly with PA which is a direct interferent in the determination of DMA with FMOC. In such a way, the formation of PA–FMOC during the second stage was prevented, and thus the method was selective for DMA. The proposed procedure was applied to the determination of DMA in the 1.0–10.0 μg/mL range. The method provided suitable linearity, accuracy and reproducibility, and limits of detection and quantification of 0.3 and 1.0 μg/mL, respectively. The applicability of the method for the determination of DMA in different types of water is shown.     

Determination of Lead(II) with the Rotating Sample System

As a result of industrialization lead is one of the most widely dispersed toxic heavy metals in the environment. There is a pressing need for a reliable, affordable and portable analytical technique for routine determination of lead at trace levels in biological and environmental samples. Despite their potential for portability and low cost, the currently available electrochemical stripping methods still have limited commercial availability. Among the reasons are the relatively large sample volumes and the large amount of reagents needed (1–3 mL), lower than required precision, and the inconvenience of a rotated electrode system. The Rotating Sample System is a unique approach to electrochemical stripping, devised for 20 μL sample droplets utilizing a large surface area electrode. This design combines the advantages of a microelectrode and a rotated electrode system. The semispherical sample drop itself is rotated by a fine gas jet directed at it tangentially, eliminating the need for a sample container. Neither fine moving mechanical parts nor sophisticated controls are required. The detection limit for lead(II) was found low enough and the reproducibility is sufficient for routine determinations in biomedical samples (5 ppb, 6%). The system can support a CDC recommended screening for blood lead levels and an on‐site analysis of environmental samples as well. Under suitable conditions calibration free direct determinations can also be performed.     

Investigation of the mechanism of pH-mediated stacking of anions for the analysis of physiological samples by capillary electrophoresis

Capillary electrophoresis has been widely used for the analysis of physiological samples such as plasma and microdialysate. However, sample destacking can occur during the analysis of these high-ionic strength samples, resulting in poor separation efficiency and reduced sensitivity. A technique termed pH-mediated stacking of anions (base stacking) has previously been developed to analyze microdialysate samples and achieve on-line preconcentration of analytes by following sample injection with an injection of sodium hydroxide. In this work, the mechanism of base stacking was investigated. Peak efficiency was shown to be a function of background electrolyte and sample ionic strength. Analytes representing several classes of compounds with a wide range of mobilities were used to study the effects of multiple parameters on sample stacking. The length of hydroxide injection required for stacking was shown to be dependent on analyte mobility and the type of amine background electrolyte used. Combinations of electrokinetic and hydrodynamic injections of sample and hydroxide were examined and it was concluded that although stacking could be achieved with several injection modes, electrokinetic injection of both sample and hydroxide was most effective for sample stacking. The mechanism of pH-mediated stacking for each of these modes is presented.     

Attomole sensitivity for unlabeled proteins and polypeptides with on-chip capillary electrophoresis and universal detection by interferometric backscatter

A universal detector based on backscatter interferometry has been developed to perform nanoliter volume refractive index measurements for on-chip sodium dodecyl sulfate (SDS) gel based (polyethylene oxide gel) separations and quantification label-free proteins. The on-chip interferometric backscatter detector (OCIBD) system consists of a simple, folded optical train based on the interaction of a laser beam with an etched channel in the shape of half cylinder in a fused-silica plate. The backscattered light from the channel takes on the form of a high-contrast interference pattern that contains information related to the bulk properties of the fluid located within the probe or detection volume of 2.32 x 10(-9) L. Depending on capillary electrophoresis (CE) injection method, the positional changes of the interference pattern extrema (fringes) allow for the quantification of unlabeled proteins at levels ranging from 11 to 310 amol (2.7 x 10(-8)mol/L) with a linear dynamic range of 2.5 decades (egg albumin). Using OCIBD microchannel-based SDS capillary gel electrophoresis (SDS/CGE), separation and detection of five label-free proteins was achieved in less than 100 seconds with detection limits ranging from 0.95 pg (1.1 x 10(-16)mol or 2.5 x 10(-7)mol/L) of calmodulin to 7.0 pg (1.0 x 10(-16)mol or 2.4 x 10(-7)mol/L) for bovine serum albumin (BSA) without signal filtering or active thermal control. This development shows that a universal detector based on backscatter interferometry can be used effectively for on-chip label-free solute analysis.     

Focusing and stabilization of bis‐intercalating dye–DNA complexes for high‐sensitive CE‐LIF DNA analysis

Multiple labeling of nucleic acids by intercalative dyes is a promising method for ultrasensitive nucleic acid assays. The properties of the fast dissociation and instability of dye–DNA complexes may prevent from their wide applications in CE‐LIF nucleic acid analysis. Here, we describe an optimum CE focusing method by using appropriately paired sample and separation buffers, Tris‐glycine buffer and Tris‐glycine‐acetic acid buffer. The developed method was applied in both uncoated and polyacrylamide coated fused‐silica capillary‐based CE‐LIF analysis while the sample and separation buffers were conversely used. The complexes of intercalative dye benzoxazolium‐4‐pyridinium dimer and dsDNA were greatly focused (separation efficiency: 1.8 million theoretical plates per meter) by transient isotachophoresis mechanism in uncoated capillary, and moderately focused by transient isotachophoresis in combination of field amplified sample stacking and further stabilized by the paired buffer in polyacrylamide coated capillary. Based on the developed focusing strategy, an ultrasensitive DNA assay was developed for quantitation of calf thymus dsDNA (from 0.02 to 2.14 pM). By the use of an excitation laser power as low as 1 mW, the detection limits of calf thymus dsDNA (3.5 kb) are 7.9 fM in concentration and 2.4×10^?22 mol (150 molecules) in mass. We further demonstrate that the non‐gel sieving CE‐LIF analysis of DNA fragments can be enhanced by the same strategy. Since the presented strategy can be applied to uncoated and coated capillaries and does not require special device, it is also reasonable to extend to the applications in chip‐based CE DNA analysis.     

Supercritical fluid extraction as an on-line clean-up technique for determination of riboflavin vitamins in food samples by capillary electrophoresis with fluorimetric detection

An automatic method for the separation and determination of riboflavin (RF) vitamins (RF, flavin mononucleotide and flavin adenine dinucleotide) in food samples (chicken liver, tablet and powder milk) is proposed. The method is based on the on-line coupling of a supercritical fluid extractor (SFE) with a continuous flow-CE system with guided optical fiber fluorimetric detection (CF-CE-FD). The whole SFE-CF-CE-FD arrangement allowed the automatic treatment of food samples (clean-up of the sample followed by the extraction of the analytes), and the direct introduction of a small volume of the extracted plug to the CE-FD system for the determination of RF vitamins. Fluorescence detection introduced an appropriated sensitivity and contributed to avoid interferences of nonfluorescent polar compounds coming from the matrix samples in the extracted plug. Electrophoretic responses were linear within the 0.05-1 microg/g range, whereas the detection limits of RF vitamins were in the 0.036-0.042 microg/g range. The proposed arrangement opens up interesting prospects for the direct determination of polar analytes in complex samples with a good throughput and high level of automation.     

Electrokinetic analyte transport assay for alpha-fetoprotein immunoassay integrates mixing, reaction and separation on-chip

A rapid and highly sensitive CE immunoassay method integrating mixing, reaction, separation, and detection on-chip is described for the measurement of alpha-fetoprotein (AFP), a liver cancer marker in blood. Antibody-binding reagents, consisting of 245-bp DNA coupled anti-AFP WA1 antibody (DNA-WA1) and HiLyte dye-labeled anti-AFP WA2 antibody (HiLyte-WA2), and AFP-containing sample were filled into adjacent zones of a chip channel defined by the laminar flow lines of the microfluidic device using pressure-driven flow. The channel geometry was thus used to quantitatively aliquot the reagents and sample into the chip. DNA-WA1 was electrokinetically concentrated in the channel and sequentially transported through the AFP-sample zone and HiLyte-WA2 zone by ITP in such a manner that the AFP sandwich immune complex formation took place in the sample and HiLyte-WA2 zones. The sandwich AFP immune complex was then detected by LIF after CGE in a separation channel that was arranged downstream of the reaction channel. AFP was detected within 136 s with a detection sensitivity of 5 pM. The on-chip immunoassay described here, applying ITP concentration, in-channel reaction, and CGE separation, has the potential of providing a rapid and sensitive method for both clinical and research applications.