The Electrochemistry of Tetraphenyl Porphyrin Iron(III) Within Immobilized Droplets Supported on Platinum Electrodes

For the first time, the voltammetry of an ensemble of immobilized benzonitrile microdroplets containing 5,10,15,20‐tetraphenyl‐21H,23H‐porphine iron (III) chloride, TPPFeCl immobilized at platinum electrodes immersed in various aqueous electrolytes has been explored. The reduction of TPPFeCl was observed with the voltammetric response seen to be highly dependent on the nature of ions in the surrounding aqueous phase. Unlike voltammetry in purely homogeneous solution the nature of the aqueous electrolyte can influence the voltammetry in the droplet phase. The electrochemical reduction of TPPFeCl contained within tetrabutylammonium chloride (TBACl) supported benzonitrile (PhCN) microdroplets immersed into an aqueous solution of TBACl was first studied. During TPPFeCl reduction the resulting [TPPFeCl]^? species is stabilized due to the excess of chloride anions inside the oil droplet. Voltammograms of homogeneous solutions of PhCN supported with TBACl show similar chemically reversible process which is also attributed to the stable [TPPFeCl]^? species. This anion stabilization was not observed when the oil droplets were supported with tetrabutylammonium perchlorate (TBAP) or when the PhCN solution bathing the microdroplet ensemble was supported with TBAP resulting in a chemically irreversible process. The voltammetry of unsupported droplets immobilized on a platinum electrode immersed in different aqueous electrolytes was also explored and the fate of the [TPPFeCl]^? species formed considered during the reduction sweep. Similarities and difference to voltammetry in purely homogeneous media are noted and the use of droplet voltammetry provides complimentary information.     

Colloidal forces between bitumen surfaces in aqueous solutions measured with atomic force microscope

Colloidal forces between bitumen surfaces in aqueous solutions were measured with an atomic force microscope (AFM). The results showed a significant impact of solution pH, salinity, calcium and montmorillonite clay addition on both long-range (non-contact) and adhesion (pull-off) forces. Weaker long-range repulsive forces were observed under conditions of lower solution pH, higher salinity and higher calcium concentration. Lower solution pH, salinity and calcium concentration resulted in a stronger adhesion forces. The addition of montmorillonite clays increased long-range repulsive forces and decreased adhesion forces, particularly when co-added with calcium ions. The measured force profiles were fitted with extended DLVO theory to show the repulsive electrostatic double layer and attractive hydrophobic forces being the dominant components in the long-range forces between the bitumen surfaces. At a very short separation distance (less than 4–6 nm), a strong repulsion of steric origin was observed. The findings provide a fundamental understanding of bitumen emulsion stability and a mechanism of bitumen “aeration” in bitumen recovery processes from oil sands.     

Screening the origin and weathering of oil slicks by attenuated total reflectance mid-IR spectrometry

The combination of attenuated total reflectance-fourier transform mid-infrared spectrometry (ATR-FTMIR) and multivariate pattern recognition is presented as a fast and convenient methodology to ascertain the source product an oil slick comes from and to evaluate the extent of its weathering. Different types of hydrocarbons (including crude oils, several heavy distillates and the Prestige's heavy fuel oil) were spilled on metallic containers designed ad hoc and their fate monitored by ATR-FTMIR. Not only environmental conditions were considered for weathering but artificial IR- and UV-irradiation. Pattern-recognition studies revealed that the different hydrocarbons clustered at different locations on the score plots and that the samples corresponding to each oil became ordered according to the extent of their weathering. Among them, fuel oil samples coming from the recent disaster of the Prestige tanker off the Galician shoreline showed a distinctive behaviour. Comparison of natural-, IR- and UV-weathering of a crude oil showed that IR solar radiation can be important in oil-weathering, in addition to broadly-reported UV degradation.     

Influence of extractions on physicochemical characterization and bioactivity of Piper nigrum oils: Study on the non-isothermal decomposition kinetic

Black pepper oils have been investigated frequently in the recent years. However, there is a significant variation in physicochemical properties and bioactivity of oils depended on extraction techniques. In this study, the systemic investigation of four various extraction methods was performed to evaluate the physicochemical characterizations, antioxidant and antibacterial activity. The investigation of ¹H NMR, FTIR and UV–Vis spectra confirmed presence of non-volatile components in oils extracted through supercritical CO₂ and hexane-soaking extractions which induced their typical thermal properties. The isothermal behaviour of extracted oils related to evaporation was within range of 3.2–7.3% (w/w) at 27 °C. The SEM images of the black pepper confirmed different operation manners of mechanism between extractions using the solvents and heating process. The lowest MIC for both essential oils from conventional hidrodistillation and microwave-assisted hidrodistillation against two bacteria including E. coli and B. subtilis were found to be 137 µg mL⁻¹. The non-isothermal decomposition kinetics were investigated on the essential oil of microwave-assisted hydrodistillation extraction. The activation energies and pre-exponent factors of non-isothermal decomposition were found to be in range of 36.5–73.7 KJ mol⁻¹ and 4.98 × 10³–1.97 × 10⁸ s⁻¹, respectively, dependent on conversional fractions of the oil. The results revealed that chemical components, physicochemical properties and bioactivity of black pepper essential oils depended on the extraction techniques.     

State of the art and research development prospects of energy and resource-efficient environmentally safe chemical process systems engineering

In this focus overview, the main types and directions of engineering, methods and techniques of intensification of chemical process systems (CPS) and process optimization of energy- and resource-efficient processes for the representative production of titanium compounds, mining waste processing systems, electrochemical coating technologies, combined technologies for the treatment of industrial effluents and energy-and resource-efficient technologies for cleaning soils from petroleum and chemical pollution products are reviewed. The following issues have been discussed: methods of complex assessment of production energy efficiency and software and information support for automated synthesis of optimal energy-efficient regenerative heat exchange systems using pinch analysis; methods and algorithms for fractal-statistical characteristics analysis of nonstationary gas flows in complex gas pipelines; methods of ecological and economic optimization of production, infrastructure supply chains; methods for assessing and preventing the dangerous environmental impact assessment of chemical pollution; organization and logistics management of business processes engineering for improving the energy efficiency of plants; engineering of problem oriented computer systems, heuristic-computational models and algorithms for intelligent integrated logistics support of the equipment life cycle; engineering developments in the field of digital transformation of energy-efficient CPS and technological production systems; application of methods for optimizing reliability factors optimization, digitalized risk and safety management in the engineering of energy- and resource efficient CPS.     

Role of self-assembled surfactant structure on the spreading of oil on flat solid surfaces

Uniform spreading of oil on solid surfaces is important in many processes where proper lubrication is required and this can be controlled using surfactants. The role of oil–solid interfacial self-assembled surfactant structure (SASS) in oil spreading is examined in this study for the case of hexadecane-surfactant droplet spreading on a flat horizontal copper surface, with triphenyl phosphorothionate surfactants having varying chain lengths (0 to 9). It is shown that the frictional forces (F_SASS) as determined by the SASS regulate droplet spreading rate according to surfactant chain length; surfactants with longer chains led to higher reduction in the spreading rate. The extent of such forces, F_SASS, depends on the surfactant density of the evolving SASS, and specific configuration the evolving SASS exhibit as per the orientations of the surfactant chains therein. Thus, F_SASS = [k₁ + k_2(t)] Γ_δ(t), where Γ_δ(t) is the surfactant adsorption density of SASS at time ‘t’ during evolution, and, k₁ and k_2(t) are the force coefficients for Γ_δ(t) and orientations (as a function of spreading time) of the surfactant chains respectively. As a SASS evolves/grows along with adsorption of surfactants at the spreading induced fresh interface, the k₁Γ_δ(t) component of F_SASS increases and contributes to reduction in the net spreading force (S). With a decrease in the net spreading force, the existence of a cross-over period, during which the transition of the spatial dynamics of the chains from disordered to realignment/packing induced ordered orientation occurs, has been inferred from the F_SASS vs. chain length relationships. Such relationships also suggested that the rate of realignment/packing is increased progressively particularly due the realignment/packing induced decrease in the net spreading force. Therefore, the realignment process is a self-induced process, which spans a measurable period of time (several minutes), the cross-over period, during which the net spreading force decreases essentially due to such self-induced process.     

Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

囊泡状二氧化硅的合成及油气吸附性能

以正硅酸四甲酯(TMOS)为硅源,P123(EO20PO70EO20)为表面活性剂,在p H=6的磷酸缓冲体系中制备了囊泡状二氧化硅材料.利用乙醇萃取脱除模板剂P123,电镜观测结果表明所得二氧化硅具有大孔囊泡结构,N2吸附结果表明其具有高比表面积和大孔容.通过Boehm滴定法确定了硅羟基数量与吸水率呈正相关.用囊泡状二氧化硅材料与商业化活性炭(AC)和硅胶(SG)对水蒸气、正己烷和油气进行静态吸附.在自建的动态正己烷吸附装置上用对囊泡状二氧化硅材料和商业化AC和SG对正己烷进行动态吸附.吸附结果表明,囊泡状二氧化硅材料的静/动态吸附容量和稳定性都远高于商业化活性炭和硅胶.     

一种可用于光降解的纳米氧化锌油水分离网

通过低温水热法在钢丝网上生长六棱柱形的氧化锌纳米柱.包覆了氧化锌纳米柱的钢丝网具有水下超疏油的特殊浸润性,并可用于油水分离.滤网在室温常压下可对含有汽油、柴油和原油等油水混合物进行高效快速分离,分离效率可达98%以上.材料可以承受1.4 kPa的油层压力且可反复使用.由于氧化锌的光响应性强,滤网可快速降解水中的亚甲基蓝,2 h的降解率可达80%.包覆了氧化锌纳米柱的钢丝网具备同时进行油水分离和降解环境中污染物的能力,是一种新型多功能水处理材料.     

气驱油油气混相过程的界面传质特性及其分子机制

油气混相过程的界面传质特性对气驱提高原油采收率技术非常重要。本文针对吉林某油田的实际油组分,采用分子动力学模拟研究了气驱油过程,分析了不同气体和驱替压力下油气两相的状态变化以及界面特性,获得不同驱替气体的最小混相压力(MMP)。结果表明,随着驱替气体压力的升高,气相的密度逐渐增大,油相膨胀密度降低,气相与油相的混合程度增强,油气两相界面厚度增加,界面张力随之减小。同时发现,驱替相中二氧化碳浓度越高,在同等气体压力下,油气界面更厚,油气混合程度更高。纯CO₂驱油得到的MMP远远小于纯N₂驱油,当这两种气体摩尔比为1 : 1混合时MMP介于两种纯气体之间,说明要达到同样的驱油效果二氧化碳需要的压力更小。最后,本文从分子微观作用力角度解释了驱替气体不同时影响油气混相程度的机制,通过分子平均作用势曲线发现油相分子对CO₂的吸引力要大于N₂分子,因此CO₂分子更容易与油相混合,驱替效果更明显。