A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.     

The electronic band structure analysis of OLED device by means of in situ LEIPS and UPS combined with GCIB

Low-energy inverse photoelectron spectroscopy (LEIPS) and ultraviolet photoelectron spectroscopy (UPS) incorporated into the multitechnique XPS system were used to probe the ionization potential and the electron affinity of organic materials, respectively. By utilizing gas cluster ion beam (GCIB), in situ analyses and depth profiling of LEIPS and UPS were also demonstrated. The band structures of the 10-nm-thick buckminsterfullerene (C₆₀) thin film on Au (100 nm)/indium tin oxide (100 nm)/glass substrate were successfully evaluated in depth direction.     

Hermetic Seal of Organic Light Emitting Diode with Glass Frit

The components of OLED encapsulation with hermetic sealing and a 1026-day lifetime were measured by PXI-1033. The optimal characteristics were obtained when the thickness of the TPBi layer was 20 nm. This OLED obtained a maximum luminance (Lmax) of 25,849 cd/m² at a current density of 1242 mA/cm², an external quantum efficiency (EQE) of 2.28%, a current efficiency (CE) of 7.20 cd/A, and a power efficiency (PE) of 5.28 lm/W. The efficiency was enhanced by Lmax 17.2%/EQE 0.89%/CE 42.1%/PE 41.9%. The CIE coordinates of 0.32, 0.54 were all green OLED elements with wavelengths of 532 nm. The shear strain and leakage test gave results of 16 kgf and 8.92 × 10⁻⁹ mbar/s, respectively. The reliability test showed that the standard of MIL-STD-883 was obtained.     

稀土配合物红色有机电致发光器件的研究

以TTA为配体合成了新的共掺杂稀土配合物Tb0.5Eu0.5(TTA)3Dipy,通过与PVK的掺杂,制备了以PVK:Tb0.5Eu0.5(TTA)3 Dipy为发光层的结构为:ITO/PVK:Tb0.5Eu0.5(TTA)3Dipy/BCP/Al的发光器件,在直流电压的驱动下,发现了铕在612 nm处的特征发射,和PVK在410 nm处的发光.此外,还观察到了位于490 nm处的新的发光峰,通过分析研究,认为新的发光来自于稀土配合物的配体和BCP之间相互作用形成的电致激基复合物.用PBD代替了BCP作为电子传输层,制备了结构为:ITO/PVK:Tb0.5Eu0.5(TTA)3DiPy/PBD/Al的发光器件,得到了纯的红色发光.     

OLED器件新型应用研究进展

有机发光二极管(organic light-emitting diodes,OLED)具有可柔性制备、低驱动电压、低功耗等优点,近年来技术上的突飞猛进及其广泛的应用前景,使之成为平板显示、新型照明、可穿戴,以及智能电子产品开发中最热门的研究课题之一.作为新一代的显示及照明技术,小尺寸OLED显示器已实现商业化,大尺寸O...     

掺杂型红色有机电致发光显示器件

全色显示是有机电致发光显示(OLED)器件发展的目标,而高性能红色发光器件一直是制约全彩色OLED器件实用化的瓶颈,也是目前有机电致发光显示研究的热点。制作了掺杂DCJTB和不同浓度的rubrene两种荧光染料的红色有机电致发光显示器件,以NPB和Alq₃分别作为空穴传输层和电子传输层,发现器件性能与只掺杂DCJTB的器件相比有明显提高,发光效率提高到2～3倍。通过Frster理论和能带理论分析了器件的能量转移机理,研究发现Frster能量转移不是掺杂器件能量转移的主要形式,载流子俘获机制才是器件效率提高的主要原因;rubrene的引入使得能量能够更有效地从Alq₃转移到DCJTB,从而显著地提高了器件的发光效率和性能。     

基于闭环二苯醚与磷氧基团的主体材料的合成及其在蓝色磷光有机发光二极管中的应用

本文通过多步有机反应制备了化合物9-苯基-9′-（4-二苯基氧化膦）苯基-氧杂蒽[diphenyl（4-（9-phenyl-9H-xanthen-9-yl）phenyl）phosphine oxide,DPPO],低温磷光发射光谱测试表明该化合物具有高的三线态能级（2.88eV）,它可以作为天蓝色磷光发光材料双（4,6-二氟苯基吡啶-N,C2）吡啶甲酰合铱[bis（3,5-difluoro-2-（2-pyridyl）phenyl-（2-carboxypyridyl）iridium（Ⅲ）,FIrpic,ET=2.62eV]的主体材料.将主体材料DPPO用于蓝色磷光有机发光二极管中,该器件在100cd/m2的亮度下,电流效率和流明效率分别达到30.6cd/A和19.2lm/W,最大外量子效率达到13.6%.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应,合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac),通过元素分析,1HNMR测定对配合物结构进行了表征,结果显示得到的是目标化合物.利用紫外光谱和荧光光谱对配合物进行了研究.利用该材料作为磷光染料制备了结构为ITO/NPB(21nm)/NPB∶7%(DPQ)Pt(acac)(17.5nm)/BCP(7nm)/Alq3(21nm)/Mg∶Ag(10∶1)(120nm)/Ag(10nm)的有机电致发光器件(OLED).结果表明,该配合物在442和485nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰;在632nm处有较强的金属配合物三重态的磷光发射;该器件的启动电压是5.0V,器件的最大亮度为1516cd·m-2,外量子效率为0.66%,流明效率为0.26lm·W-1,是一种红色磷光材料.     

Blue electroluminescent materials based on indeno[1,2-a]arene derivatives for Organic Light-Emitting Diodes

Abstract

In this study, as a continuous effort for searching efficient blue-emitting materials, we designed and synthesized materials based on indeno[1,2-a]arene. OLED devices using these materials were fabricated in the following sequence; ITO (180?nm)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (50?nm)/emitting materials (30?nm)/4,7-diphenyl-1,10-phenanthroline (Bphen) (30?nm)/Liq/Al (2/100?nm). Particularly, a device using 7,7-dimethyl-7H-indeno[1,2-a]pyrene as emitter showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 1.10?cd/A, 0.49?lm/W, 1.47% at 20?mA/cm², respectively with CIE (x,y) coordinates of (0.15, 0.08) at 6.0V.     

人体静电放电对有机发光二极管的影响

研究了静电放电（ESD）人体模式（HBM）下的脉冲应力对有机发光二极管（OLED）的性能及寿命的影响,并讨论了相应的物理机制。对比分析了4组OLED在施加ESD放电为0,200,800,1 600 V前后的电学和光学特性,并进行了相应的寿命测试分析。研究发现,OLED器件的光谱对ESD不敏感,随着冲击电压的增大,由于静电打击对载流子的短期抑制效应,OLED的亮度出现轻微下降。在静电冲击电压为200 V和800 V时,伏安特性没有发生变化;当静电冲击电压增至1 600 V时,反向漏电有明显增加。后续的加速寿命实验表明,静电打击对器件的工作寿命没有明显的规律性影响,但是会一定程度提高非本质老化失效的概率。