Solid-state Decompositions — Stagnation or Progress?

An appraisal of the trends discerned in the recent literature concerned with solid-state decompositions suggests that this research area lacks a general theoretical framework and, hence, order in the subject is difficult to recognize. There have been surprisingly few reviews of the field. Many of the continuing flow of research publications may be of individual value, but most do not contribute to the overall development of the topic. For example, in many studies of reversible dissociations the sensitivity of rate characteristics to prevailing conditions is not discussed so that the fit of data to rate equations and the magnitudes of calculated Arrhenius parameters may be of empirical value only. Some studies report kinetic results without mechanistic discussions supported by complementary observations. Progress forward from an apparent state of stagnation depends upon more critical examination of the existing literature, coupled with better designed experiments to establish the reproducibility and reliability of kinetic conclusions. Techniques capable of providing insights into the bond redistribution steps that occur during reactions in crystals are also urgently needed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solid phase extraction of copper(II) by fixed bed procedure on cation exchange complexing resins

The efficiency of the metal ion recovery by solid phase extraction (SPE) in complexing resins columns is predicted by a simple model based on two parameters reflecting the sorption equilibria and kinetics of the metal ion on the considered resin. The parameter related to the adsorption equilibria was evaluated by the Gibbs–Donnan model, and that related to the kinetics by assuming that the ion exchange is the adsorption rate determining step. The predicted parameters make it possible to evaluate the breakthrough volume of the considered metal ion, Cu(II), from different kinds of complexing resins, and at different conditions, such as acidity and ionic composition.     

Evaluating the Thermal Hazard of Double-Base Propellant SQ-2 by Using Microcalorimetry Method

The thermal decomposition behavior of double‐base rocket propellant SQ‐2 was studied by a Calvet microcalorimeter at four different heating rates. The kinetic and thermodynamic parameters were obtained from the analysis of the heat flow curves. The critical temperature of thermal explosion (T_b), the self acceleration decomposition temperature (T_SADT), the adiabatic decomposition temperature rise (ΔT_ad), the time‐to‐explosion of adiabatic system (t), critical temperature of hot‐spot initiation (T_cr), critical thermal explosion ambient temperature (T_acr), safety degree (SD) and thermal explosive probability (P_TE) were presented to evaluate the thermal hazard of SQ‐2.     

Adsorption/Desorption Behavior of Bovine Serum Albumin and Porcine Insulin on Chemically Patterned Porous Gel Networks

Adsorption/desorption of proteins onto a biomaterial surface plays a major role on the biocompatibility of the implanted material. By modifying the biomaterial surface with specially designed functional groups one may achieve the most specific behavior of the developed material used in a biological system. Based on that, porous gel matrixes with functionalized surfaces offer unlimited possibilities to control the protein-substrate interaction behavior. In the present work, we have functionalized the surface of porous glass with several chemical groups during the synthesis of the silica matrix. The porous glass matrixes were obtained using tetraethoxysilane (TEOS)/ethanol and functionalized with 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltriethoxysilane (APTES). In vitro tests of the kinetics of protein adsorption and desorption from the gel matrix were monitored by UV-visible spectroscopy. The bioactivity of the incorporated protein was verified by in vivo experiments with adult male rats, where they presented an acute hypoglycemic peak.     

Kinetics of the formation of Fe2B layers in gray cast iron: Effects of boron concentration and boride incubation time

The growth kinetics of Fe₂B layers formed at the surface of gray cast iron were evaluated in this study. The pack-boriding process was applied to produce the Fe₂B phase at the material surface, and the variables included three temperatures (1173, 1223 and 1273 K) and four exposure times (2, 4, 6 and 8 h). Taking into account the growth fronts obtained at the surface of the material and the mass balance equation at the Fe₂B/substrate interface, the boron diffusion coefficient on the borided phase was estimated for the range of treatment temperatures. Likewise the parabolic growth constant, the instantaneous velocity of the Fe₂B/substrate interface, and the weight gain in the borided samples were established as a function of the parameters τ(t) and α(C), which are related to the boride incubation time (t₀(T)) and boron concentration at the Fe₂B phase, respectively. Observation of the growth kinetics of the Fe₂B layers in gray cast irons suggest an optimum value of boron concentration that is in good agreement with the set of boriding experimental conditions used in this work.     

Kinetic model of reversible addition‐fragmentation chain transfer polymerization in microemulsions

A simplified kinetic model for RAFT microemulsion polymerization has been developed to facilitate the investigation of the effects of slow fragmentation of the intermediate macro‐RAFT radical, termination reactions, and diffusion rate of the chain transfer agent to the locus of polymerization on the control of the polymerization and the rate of monomer conversion. This simplified model captures the experimentally observed decrease in the rate of polymerization, and the shift of the rate maximum to conversions less than the 39% conversion predicted by the Morgan model for uncontrolled microemulsion polymerizations. The model shows that the short, but finite, lifetime of the intermediate macro‐RAFT radical (1.3 × 10^?4–1.3 × 10^?2 s) causes the observed rate retardation in RAFT microemulsion polymerizations of butyl acrylate with the chain transfer agent methyl‐2‐(O‐ethylxanthyl)propionate. The calculated magnitude of the fragmentation rate constant (k_f = 4.0 × 10¹–4.0 × 10³ s^?1) is greater than the literature values for bulk RAFT polymerizations that only consider slow fragmentation of the macro‐RAFT radical and not termination (k_f = 10^?2 s^?1). This is consistent with the finding that slow fragmentation promotes biradical termination in RAFT microemulsion polymerizations. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 604–613, 2010     

Non-isothermal Decomposition Kinetics of Complex of Co(III), Ni(II) with O,O'-dialkyldithiophosphates and Adducts of Ni-complex with Pyridines

Thermal behaviour of tri(O,O'-diisopropyldithiophosphate)cobalt(III), Co(dptp)₃ and bis (O,O'-diethyldithiophosphate)nickel(II), Ni(detp)₂ and its adducts with pyridine, Ni(detp)₂(py)₂ or 4-methylpyridine, Ni(detp)(mpy)₂ in a dynamic nitrogen atmosphere was investigated by TG-DTG and DSC techniques, which showed a medium endothermic peak for the evolution process of pyridine(or 4-methylpyridine) and a strong exothermic peak for that of O,O'-diethyldithiophosphate. The thermal stability and decomposition patterns for these compounds were compared and interpreted in terms of structural features such as bond character and steric effects. The kinetic parameters and mechanisms of every decomposition stage involved for all these complexes were obtained employing the non-isothermal kinetic analysis method suggested by Malek et al., which showed the kinetics mechanism for pyrolysis of pyridine(or 4-methylpyridine) is an S-B empirical model with lower activation energy, while that of O,O'-dialkyldithiophosphate is a diffusion model. These results are in accord with the fact that two ligands are of different type. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hyperbranched polymers as scaffolds for multifunctional reversible addition–fragmentation chain‐transfer agents: A route to polystyrene‐core‐polyesters and polystyrene‐block‐poly(butyl acrylate)‐core‐polyesters

Polydisperse hyperbranched polyesters were modified for use as novel multifunctional reversible addition–fragmentation chain‐transfer (RAFT) agents. The polyester‐core‐based RAFT agents were subsequently employed to synthesize star polymers of n‐butyl acrylate and styrene with low polydispersity (polydispersity index < 1.3) in a living free‐radical process. Although the polyester‐core‐based RAFT agent mediated polymerization of n‐butyl acrylate displayed a linear evolution of the number‐average molecular weight (M_n) up to high monomer conversions (>70%) and molecular weights [M_n > 140,000 g mol^?1, linear poly(methyl methacrylate) equivalents)], the corresponding styrene‐based system reached a maximum molecular weight at low conversions (≈30%, M_n = 45,500 g mol^?1, linear polystyrene equivalents). The resulting star polymers were subsequently used as platforms for the preparation of star block copolymers of styrene and n‐butyl acrylate with a polyester core with low polydispersities (polydispersity index < 1.25). The generated polystyrene‐based star polymers were successfully cast into highly regular honeycomb‐structured microarrays. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3847–3861, 2003