Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

Minimax principles for elliptic mixed hemivariational–variational inequalities

In this paper, minimax principles are explored for elliptic mixed hemivariational–variational inequalities. Under certain conditions, a saddle-point formulation is shown to be equivalent to a mixed hemivariational–variational inequality. While the minimax principle is of independent interest, it is employed in this paper to provide an elementary proof of the solution existence of the mixed hemivariational–variational inequality. Theoretical results are illustrated in the applications of two contact problems.     

Structural optimization with parameter-transfer finite element

A mathematical method to solve structural problems, using parameter-transfer finite elements (P-TFE) was recently proposed by the authors [1] [2] [3]. The proposed transfer finite element approach is able to create a mathematical model of a structure, taking into account directly the whole behaviour of the structure under dynamic, aerodynamic, and thermal actions, and not by assembling, in a separate fashion, the stiffness and the mass matrix on one side and the external load vector as performed by the classical finite element procedure.The purpose of this paper is to apply the above methodology to optimization problems, in particular to obtain the minimum structural weight for a beam, under primary constraints on buckling load or natural frequencies.The use of P-TFE in the field of structural optimization overcomes most difficulties of the usual techniques of solution and the element is particularly useful in the evaluation of the sensitivity matrix.The formulation of the optimization problem based on P-TFE is presented and some applications are studied. The numerical results obtained are compared with other existing methodologies and briefly discussed.

---

Sommario Gli autori hanno già proposto un metodo per studiare problemi strutturali [1] [2] [3], introducendo una nuova metodologia di discretizzazione, basata sull'impiego di elementi finiti di trasferimento, funzioni esplicite di un parametro, indicati come P-TFE. Tali elementi sono in grado di rappresentare, in similitudine alla funzione di trasferimento, il comportamento completo dell'elemento strutturale in esame, soggetto ad azioni dinamiche, aerodinamiche e termiche; sono parimenti in grado di produrre, in similitudine al metodo degli elementi finiti, un modello matematico discreto di un continuo.Scopo del presente lavoro è di applicare detta metodologia a problemi di ottimizzazione, in particolare alla ricerca del minimo peso per una trave che mantenga inalterate le sue caratteristiche di carico critico o le frequenze naturali di vibrazione.Vengono quindi presentati alcuni risultati numerici dei casi esaminati e confrontati con quelli ottenuti da altri autori con l'impiego di altre metodologie.

---

List of Symbols {B} _m vector of the generalized state variables - {C} _m vector of integration constants - [I] unit matrix - EI bending stiffness - A cross-sectional area - u adimensional thickness - l beam length - M,M bending moment - [N] _m shape function ofm-th order - [N*] shape function atx ₀ - P axial load - [R] _i transfer matrix of thei-th element - T,T shear force - w transverse displacement - x adimensional independent variable - x ₀ value ofx at the left of the element - {Y} vector of state variables - {Y*} imposed condition atx ₀ - _0m Kronecker delta with the first pedix always set equal to zero - normalized eigenfrequency - normalized buckling load - mass density     

Criteria for local equilibrium in a system with transport of heat and mass

Nonequilibrium molecular dynamics is used to compute the coupled heat and mass transport in a binary isotope mixture of particles interacting with a Lennard-Jones/spline potential. Two different stationary states are studied, one with a fixed internal energy flux and zero mass flux, and the other with a fixed diffusive mass flux and zero temperature gradient. Computations are made for one overall temperature,T=2, and three overall number densities,n=0.1, 0.2, and 0.4. (All numerical values are given in reduced, Lennard-Jones units unless otherwise stated.) Temperature gradients are up to T=0.09 and weight-fraction gradients up to w ₁=0.007. The flux-force relationships are found to be linear over the entire range. All four transport coefficients (theL-matrix) are determined and the Onsager reciprocal relationship for the off-diagonal coefficients is verified. Four different criteria are used to analyze the concept of local equilibrium in the nonequilibrium system. The local temperature fluctuation is found to be T0.03T and of the same order as the maximum temperature difference across the control volume, except near the cold boundary. A comparison of the local potential energy, enthalpy, and pressure with the corresponding equilibrium values at the same temperature, density, and composition also verifies that local equilibrium is established, except near the boundaries of the system. The velocity contribution to the BoltzmannH-function agrees with its Maxwellian (equilibrium) value within 1%, except near the boundaries, where the deviation is up to 4%. Our results do not support the Eyring-type transport theory involving jumps across energy barriers; we find that its estimates for the heat and mass fluxes are wrong by at least one order of magnitude.     

Lattice-BGK approach to simulating granular flows

Many continuum theories for granular flow produce an equation of motion for the fluctuating kinetic energy density (granular temperature) that accounts for the energy lost in inelastic collisions. Apart from the presence of an extra dissipative term, this equation is very similar in form to the usual temperature equation in hydrodynamics. It is shown how a lattice-kinetic model based on the Bhatnagar-Gross-Krook (BGK) equation that was previously derived for a miscible two-component fluid may be modified to model the continuum equations for granular flow. This is done by noting that the variable corresponding to the concentration of one species follows an equation that is essentially analogous to the granular temperature equation. A simulation of an unforced granular fluid using the modified model reproduces the phenomenon of clustering instability, namely the spontaneous agglomeration of particles into dense clusters, which occurs generically in all granular flows. The success of the continuum theory in capturing the gross features of this basic phenomenon is discussed. Some shear flow simulations are also presented.     

Coulomb pair density matrix I

The Coulomb pair density matrixG (r, r) for attractive and repulsive potentials is not only interesting for determining the two-particle effective potentials, but it is also essential in numerical studies of quantum systems. A high-temperature approximation is obtained for logG (r, r), in the form of simple integrals or series expansions; large-distance expansions are also given.     

Positivity of entropy production in nonequilibrium statistical mechanics

We analyze different mechanisms of entropy production in statistical mechanics, and propose formulas for the entropy production ratee() in a state . When is steady state describing the long term behavior of a system we show thate()0, and sometimes we can provee()>0.     

18－冠－6及其碱金属配合物构象和稳定性的分子力学研究

１８－冠－６及其碱金属配合物构象和稳定性的分子力学研究张士国,李红,杨频（滨州师范专科学校滨州２５６６０４）（山西大学分子所太原０３０００６）关键词分子力学,冠醚,配合物,构象１８－冠－６及其大部分配合物的晶体结构已被测定,但由于存在晶体堆积能而使分...     

Nonequilibrium dynamics of a diffusion-limited reaction driven by a cluster-memory mechanism

The diffusion-limited reaction A+AA+B is studied in general dimension. The asymptotic decay of the system is found to depend nontrivially upon the initial concentration of A particles for certain ranges of the diffusion constant, backward reaction rate, and total concentration of particles. This nonequilibrium behavior is due to the formation of clusters centered about the initial A particles. A perturbative analysis ind=1 shows that the transition to the nonequilibrium dynamics is sharp and is quite similar to another previously studied reaction A+AA. Ford>1, a scaling argument is presented which describes the dependence of the asymptotic decay on the initial concentration of A particles and the equilibrium concentration for large backward reaction rates. Monte Carlo data are shown which confirm the analytic work ind=1, 2, and 3.     

Polarographic study of Tl+, Li+, Na+, K+, and Cs+ complexes with monensin anion in dipolar aprotic solvents

Summary The stability constants,K _sof monensin complexes with Li⁺, Na⁺, K⁺ and Cs⁺ ions were studied by a competitive polarographic method using the Tl⁺/Tl(Hg) redox couple as a sensitive electrochemical probe. TheK _svalues are strongly influenced by the solvents (acetonitrile, propionitrile, acetone, N,N-dimethylformamide, N-methyl pyrolidinone, N,N-dimethylacetamide, dimethylsulfoxide, N,N-diethylformamide and N,N-diethylacetamide were used in experiments) and vary inversely with the Gutmann donicity scale. Molecular mechanics computations revealed the probable structures of the complexes.

---

Polarographische Untersuchung von Tl⁺-, Li⁺-, Na⁺- und Cs⁺-Komplexen mit Monesin-Anion in dipolaren aprotischen Lösungsmitteln

Zusammenfassung Es wurden die StabilitätskonstantenK _svon Monesin-Komplexen mit Li⁺-, Ma⁺- und Cs⁺-Ionen mittels einer competitiven polarographischen Methode unter Verwendung der Tl⁺/Tl(Hg)-Redoxelektrode als sensitiver elektrochemischer Sonde bestimmt. DieK _s-Werte werden stark vom Lösungsmittel (Acetonitril, Propionitril, Aceton, N,N-Dimethylformamid, N-Methylpyrrolidinon, N,N-Dimethylacetamid, Dimethylsulfoxid, N,N-Diethylformamid und N,N-Diethylacetamid) beeinflußt, wobei sie invers zurGutmann schen Donizitätsskala variieren. Die wahrscheinliche Struktur der Komplexe wurde mittels molekularmechanischer Berechnungen ermittelt.