A normalised residence time transport equation for the numerical simulation of combustion with high-temperature air

This study concerns the numerical simulation of turbulent non-premixed combustion in highly preheated air streams. One of the objectives is to settle an efficient computational procedure to proceed with the numerical simulation of large-scale industrial devices. It is also expected that the availability of such a computational framework may facilitate comprehensive sensitivity analyses as well as the development of mathematical models able to represent turbulence-chemistry interactions (TCI) in such conditions. Based on the salient physical ingredients that characterise scalar mixing, propagation, and self-ignition processes, a turbulent combustion modelling framework is thus introduced and applied to the numerical simulation of well-documented laboratory flames. In the corresponding geometries, the bulk flow velocities of the reactants streams can reach rather large values, which lead the flame to lift from the burner rim. Partially premixed flame edges thus stabilise the whole flame structure and the temperature of the oxidising stream can be increased by vitiation with burned gases so as to promote the corresponding flame-stabilisation processes. For sufficiently large values of the vitiated airstream temperature, self-ignition mechanisms may be triggered thus leading to a competition between mixing, propagation, and ignition processes. In this context, the ratio of the residence time to the self-ignition delay is thought to be a relevant variable to delineate the possible influence of ignition phenomena. Therefore, a modelled transport equation for this normalised residence time is considered. The performance of the corresponding modelling proposal is analysed with special emphasis placed on its ability to reproduce ‘memory’ or ‘lagrangian’ effects related to thermal aging processes. In this respect, it is noteworthy that the present set of computations makes use of tabulated quantities associated to (i) steady laminar one-dimensional diffusion flamelets, so as to describe the composition of combustion products, (ii) steady laminar one-dimensional premixed flamelets, to describe the flame brush propagation, and (iii) temporal evolution of zero-dimensional homogeneous mixtures to account for the possible occurrence of self-ignition phenomena. In particular, the tabulated self-ignition time value is used to evaluate the increase in the normalised residence time. Finally, two modelling parameters are put into evidence and studied through a detailed sensitivity analysis.     

Elastic mechanical grain interactions in polycrystalline materials; analysis by diffraction-line broadening

Abstract

Experimental investigations have revealed that the Neerfeld–Hill and Eshelby–Kröner models, for grain interactions in massive, bulk (in particular, macroscopically isotropic) polycrystals, and a recently proposed effective grain-interaction model for macroscopically anisotropic polycrystals, as thin films, provide good estimates for the macroscopic (mechanical and) X-ray elastic constants and stress factors of such polycrystalline aggregates. These models can also be used to calculate the strain variation among the diffracting crystallites, i.e. the diffraction-line broadening induced by elastic grain interactions can thus be predicted. This work provides an assessment of diffraction-line broadening induced by elastic loading of polycrystalline specimens according to the various grain-interaction models. It is shown that the variety of environment, and thus the heterogeneity of the stress–strain states experienced by each of the individual grains exhibiting the same crystallographic orientation in a real polycrystal, cannot be accounted for by traditional grain-interaction models, where all grains of the same crystallographic orientation in the specimen frame of reference are considered to experience the same stress–strain state. A significant degree of broadening which is induced by the heterogeneity of the environments of the individual crystallites is calculated on the basis of a finite element algorithm. The obtained results have vast implication for diffraction-line broadening analysis and modelling of the elastic behaviour of massive polycrystals.     

Observation of thermoluminescence induced by fission fragments

Abstract

Thermoluminescence induced in CaF₂ powder by fission fragments emanating from a uranium foil bombarded by fast neutrons has been measured as a function of neutron fluence. A linear relationship between the glow produced and the fast neutron fluence between 5 × 10¹⁰ and 6.5 × 10¹¹ n/cm² has been obtained, thus establishing the feasibility of the use of this method for fast-neutron dosimetry. A limitation of the method is that, if the fissile foil is not separated from the phosphor after irradiation, the TL produced by the α-disintegration of ²³⁸U may eventually mask the fission-induced TL.     

Mossbauer study of ferrite systems Co x Mn1−x Fe2O4 and Ni x Mn1−x Fe2O4

Mössbauer spectra of Co _x Mn_1?x Fe₂O₄ and Ni _x Mn_1?x Fe₂O₄ ferrites withx values ranging from 0·1 to 0·8 in steps of 0·1 have been recorded at room temperature. All spectra exhibit well-defined Zeeman hyperfine patterns. It has been observed that hyperfine field at Fe³⁺ nucleus increases more rapidly by nickel substitution than by cobalt substitution. This has been explained in terms of exchange interactions and cation distribution in the spinels. Hyperfine fields, isomer shifts and quadrupole splittings have been determined.     

纳米孔壁面作用对蛋白质过孔影响的粗粒化分子动力学模拟

基于粗粒化分子动力学方法模拟电驱动蛋白质过孔过程,研究纳米孔-水/纳米孔-蛋白质相互作用对电泳迁移率的影响;用操控式分子动力学模拟分析蛋白质在不同相互作用下过孔摩擦系数和摩擦阻力.研究发现：蛋白质黏附纳米孔壁面对其过孔特性影响并不明显,而纳米孔-水相互作用对蛋白质过孔电泳迁移率和摩擦系数影响较大.随纳米孔-水相互作用增强,纳米孔壁面与蛋白质附近水分子运动差异显现,蛋白质过孔摩擦阻力显著增大,过孔摩擦系数随之增大,进而影响蛋白质过孔电泳迁移率.所得结果可为纳米孔材料设计提供理论指导.     

The spin-isospin decomposition of the nuclear symmetry energy from low to high density

The energy per particle BA in nuclear matter is calculated up to high baryon density in the whole isospin asymmetry range from symmetric matter to pure neutron matter.The results,obtained in the framework of the Brueckner-Hartree-Fock approximation with two-and three-body forces,confirm the well-known parabolic dependence on the asymmetry parameterβ=(N?Z)/A(β^2 law)that is valid in a wide density range.To investigate the extent to which this behavior can be traced back to the properties of the underlying interaction,aside from the mean field approximation,the spin-isospin decomposition of BA is performed.Theoretical indications suggest that theβ^2 law could be violated at higher densities as a consequence of the three-body forces.This raises the problem that the symmetry energy,calculated according to theβ^2 law as a difference between BA in pure neutron matter and symmetric nuclear matter,cannot be applied to neutron stars.One should return to the proper definition of the nuclear symmetry energy as a response of the nuclear system to small isospin imbalance from the Z=N nuclei and pure neutron matter.     

激光产生温稠密物质的微观动力学过程及状态诊断

随着大型激光装置的建立和精密测量技术的发展,强激光与固体相互作用成为实验室产生温稠密物质的一个重要手段。温稠密物质的结构复杂性、瞬态性和非平衡性给理论建模和实验测量带来了巨大挑战。本文系统介绍了激光产生温稠密物质的实验手段和理论模拟方法方面的重要进展,分析了其中的电子激发动力学、电子-离子能量弛豫过程、离子动力学等物理过程,总结了温稠密物质状态诊断的实验技术和理论方法,并论述了激光产生温稠密物质的发展趋势。     

驻波声场中单分散细颗粒的相互作用特性

利用外加声场促进悬浮在气相中的细颗粒发生相互作用,进而引起颗粒的碰撞和凝并,使得颗粒平均粒径增大、数目浓度降低,是控制细颗粒排放的重要技术途径.为探究驻波声场中单分散细颗粒的相互作用,建立包含曳力、重力、声尾流效应的颗粒相互作用模型,采用四阶经典龙格-库塔算法和二阶隐式亚当斯插值算法对模型进行求解.将数值模拟得到的颗粒声波夹带速度和相互作用过程与相应的解析解和实验结果进行对比,验证模型的准确性.进而研究颗粒初始条件和直径对相互作用特性的影响.结果表明,初始时刻颗粒中心连线越接近声波波动方向、颗粒位置越接近波腹点,颗粒间的声尾流效应就越强,颗粒发生碰撞所需要的时间就越短.研究还发现,颗粒直径对颗粒相互作用的影响取决于初始时刻颗粒中心连线偏离声波波动方向的程度.当偏离较小时,颗粒直径越大,颗粒发生碰撞所需要的时间越短;当偏离很大时,直径较小的颗粒能够发生碰撞,而直径较大的颗粒则无法发生碰撞.     

Simulation study on cooperation behaviors and crowd dynamics in pedestrian evacuation

Pedestrian evacuation is actually a process of behavioral evolution. Interaction behaviors between pedestrians affect not only the evolution of their cooperation strategy, but also their evacuation paths-scheduling and dynamics features. The existence of interaction behaviors and cooperation evolution is therefore critical for pedestrian evacuation. To address this issue, an extended cellular automaton(CA) evacuation model considering the effects of interaction behaviors and cooperation evolution is proposed here. The influence mechanism of the environment factor and interaction behaviors between neighbors on the decision-making of one pedestrian to path scheduling is focused. Average payoffs interacting with neighbors are used to represent the competitive ability of one pedestrian, aiming to solve the conflicts when more than one pedestrian competes for the same position based on a new method. Influences of interaction behaviors, the panic degree and the conflict cost on the evacuation dynamics and cooperation evolution of pedestrians are discussed. Simulation results of the room evacuation show that the interaction behaviors between pedestrians to a certain extent are beneficial to the evacuation efficiency and the formation of cooperation behaviors as well. The increase of conflict cost prolongs the evacuation time. Panic emotions of pedestrians are bad for cooperation behaviors of the crowd and have complex effects on evacuation time. A new self-organization effect is also presented.