可见／近红外漫反射光谱无损检测南丰蜜桔维生素C的研究

应用可见/近红外漫反射光谱对南丰蜜桔维生素C含量进行了无损检测研究.在谱区350～1 800nm,应用主成分分析和偏最小二乘法对经过预处理光谱进行数学建模,主成分数和光谱区间选择分别由完全交互验证和回归系数法确定.定标模型对10个未知样品的预测结果是:预测相关系数为0.813,预测均方差为2.112 mg(100 g)-1,预测偏差为-0.810 mg(100 g)-1.文章表明利用可见/近红外漫反射光谱技术无损检测南丰蜜桔维生素C具有可行性.     

Critical Impact of Chloride Containing Reference Electrodes on Electrochemical Measurements

Chloride containing reference electrodes, such as various silver‐silver chloride electrodes, are well established in electrochemical analyses. Usually less attention is paid to the influence of potential chloride contamination of electrochemical measurements. Herein, the impact of the chloride leakage rate is studied by means of experiments concerning the anodic oxidation of aluminum. Based on the results, the authors determine critical leakage rates, depending on typical electrolyte volumes and experimental conditions. The results demonstrate that chloride leakage can significantly influence electrochemical measurements, even at ultra‐low leakage rates. A guideline for the usage of chloride containing reference electrodes is deduced from the experimental results and theoretical considerations.     

Theoretical analysis of magnetic sensor output voltage

The output voltage is an important parameter to determine the stress state in magnetic stress measurement, the relationship between the output voltage and the difference in the principal stresses was investigated by a comprehensive application of magnetic circuit theory, magnetization theory, stress analysis as well as the law of electromagnetic induction, and a corresponding quantitative equation was derived. It is drawn that the output voltage is proportional to the difference in the principal stresses, and related to the angle between the principal stress and the direction of the sensor. This investigation provides a theoretical basis for the principle stresses measurement by output voltage.     

Evaluation of uncertainty utilising the component by component approach

 This paper reviews the so-called "component by component approach" of evaluating measurement uncertainty. An overview of the evaluation process is given followed by an in-depth discussion of some of the differences between this approach and the approach of utilising validation data. Some of the advantages and disadvantages of using the component by component approach are outlined at the end. Received: 4 August 1999 · Accepted: 11 November 1999     

Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites

The scattering behavior of P-waves in piezoelectric composites with 1–3 connectivity is studied. The method of wave function expansion is adopted for the theoretical derivations. Analytical expressions are obtained for the distributions of mechanical displacement in z-direction along the circumferences of piezoelectric cylinders. These solutions are used to study the influence of each element of the stiffness matrix and the piezoelectric matrix on the various resonant modes of vibration. Numerical results obtained indicate that perturbations of the elements c₄₄ and e₁₅ significantly affect resonant frequencies and amplitudes, perturbations of c₁₁ and c₁₂ have pronounced effects on resonant modes of high frequencies also. However, the resonant modes are not so sensitive to the perturbations of c₁₃, e₃₁ and e₃₃. The dynamic characteristics of 1–3 connectivity piezoelectric composites exposed here are meaningful for the design and manufacture of sensor/actuator elements by this kind of composites as well as the on-line health monitoring of the mechanical properties variations of the composites itself.     

Nuclear magnetic resonance-compatible furnace for high temperature MR imaging and spectroscopy in situ

A high temperature magnetic resonance compatible furnace for real time in situ monitoring of materials, processes, and chemical reactions with magnetic resonance imaging and spectroscopy is described. Design issues are analyzed. Example applications are demonstrated with a time sequence of proton images of the binder burnout in a porous green ceramic cylinder containing polyethylene glycol binder at 200 degrees C, and 7Li images of the molten salt LiCl at 700 degrees C.     

Voice field measurements—a new method of examination: the influence of hearing on the human voice

There are various methods to evaluate voice parameters. Original software was used to assess the voice quality by the staff of AUDIO-Fon centr Brno, Czech Republic. A group of hereditary deaf persons was examined. Deaf persons have all of the biological conditions to make voice except for the possibility of acoustic feedback. We examined the voices of 35 persons (20 men and 15 women) with hereditary profound hearing impairments, and we compared voice parameters with the voice of intact persons. To measure we used special software called voice field measurements (VFMs). The program graphically records voice frequency and intensity. VFM is an objective method that enables the assessment of basic physical voice characteristics. It is suitable for the examination of both intact and disturbed voice. The voice of the deaf has a higher basic voice frequency in men as well as in women. This type of voice production, ie, childlike voice, which is fixed only by a motor stereotype, is much more demanding for a mature larynx. Hearing influences both the voice development and speech production. The voice of persons with hearing impairments has a higher basic voice frequency regardless of their sex. This type of voice production, which is fixed only by a motor stereotype, ie, child voice, is much more demanding for a larynx of an adult. Thus, phonation of deaf people is more demanding and their voice production needs greater effort. Deaf people, despite an intact phonic apparatus, cannot produce more than one type of voice. They cannot modulate their voices concerning the frequency and dynamics. They cannot change their voices continually. The voice is limited in both of these parameters (frequency and dynamics). If a deaf person wants to change a voice characteristic, it is possible only by discontinuous changes-"skipping."     

A nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity

The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K(IC)) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature (FATT) was determined as a function of aging time. Nonlinear ultrasonics was employed as the theoretical basis to explain the harmonic generation in a damaged material, and the nonlinearity parameter of the second harmonic wave was the experimental measure used to be correlated to the fracture toughness of the rotor steel. The nondestructive procedure for estimating the K(IC) consists of two steps. First, the correlations between the nonlinearity parameter and the FATT are sought. The FATT values are then used to estimate K(IC) using the K(IC) versus excess temperature (i.e., T-FATT) correlation that is available in the literature for CrMoV rotor steel.     

Traceability without uncertainty: current situation in the pharmaceutical industry

The current situation in the pharmaceutical industry is discussed, when the traceability of measurement (analytical) results to certified values of pharmacopoeial reference standards is required, without evaluating their uncertainties. It is shown that the evaluation of measurement uncertainty is necessary for understanding the level of confidence of the analytical results and their comparability, particularly during preparation and characterisation of the reference standards.Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board and the Publisher. Apart from exceptional circumstances, they are not submitted to the usual referee procedure and go essentially unaltered.