浅议梁的强度与刚度的关系1)

本文提出了梁的强刚比的定义,用无量纲的形式定量地表达了梁的强度与刚度之间的关系,以期充分发挥材料的潜力并促进材料力学的课堂教学。强刚比与载荷大小无关,其数值可以通过有限元方法或者通过梁的载荷试验来获得。结合工程实际,从设计和试验两个方面对梁的强刚比 及其影响因素进行了简要地探讨和分析。     

中国银行间拆借利率扩散模型的极大拟似然估计

本文用极大拟似然估计法估计了中国银行间市场七天拆借利率扩散模型的参数。并用自助法对众多不同的模型进行了广义拟似然比检验。结论表明:中国货币市场利率具有均值回复效应:利率敏感系数γ值为1.421265,对利率水平具有较高敏感性。     

方波激发非接触式电导检测器信噪比的影响因素研究

研制了用于毛细管电泳的方波激发非接触式电导检测器(CCD)并详细考查了对检测器信噪比影响较大的几个重要因素,包括激发频率和运算放大器、基线分压电路和A/D转换器、数字低通滤波;以及常见缓冲体系2-(N-吗啡啉)-乙磺酸/组氨酸(MES/His)体系中电解质浓度,添加剂十六烷基三甲基溴化铵(CTAB)对金属离子的检出信号的影响。所得的结果对于该类检测器的设计和优化具有参考价值。     

涡轮叶栅前缘槽缝气膜冷却的数值模拟

应用FINE/TURBO软件包,求解三维雷诺平均N-S方程,对叶片前缘有两列冷却槽缝的气膜冷却流场进行了数值模拟,获得了不同吹风比下叶片表面静压分布与极限流线.在计算结果与实验数据良好符合的基础上,详细分析了槽缝冷却三维定常流场结构与槽缝附近的流动细节.研究结果表明,槽缝冷却对前缘压力分布影响较大,且在压力面引起较大的分离流动,不利于冷却.     

回旋速调管双阳极磁控注入电子枪的设计与优化

 根据8 mm回旋速调管放大器对双阳极磁控注入电子枪的要求,分析了电极形状、阳极电压、磁场、注电流对电子注横纵速度比和速度零散的影响,并进行了粒子模拟。分析表明：这些因素可归根为电场和磁场的作用,阴极附近高的电场有助于提高横纵速度比和降低速度零散;而高的磁场及低的磁压缩比将降低横纵速度比,但对速度零散影响无明显规律。在此基础上通过优化电极形状、磁场分布、电流、第一阳极电压和第二阳极电压,模拟并试制出工作电压65 kV、电流12 A、磁场1.4 T的双阳极电子枪,得到的横纵速度比值为1.4,横向速度零散为4.5%, 为8 mm回旋速调管提供了稳定高质量的电子注。     

A Testable Theory for the Emergence of the Classical World

The transition from the quantum to the classical world is not yet understood. Here, we take a new approach. Central to this is the understanding that measurement and actualization cannot occur except on some specific basis. However, we have no established theory for the emergence of a specific basis. Our framework entails the following: (i) Sets of N entangled quantum variables can mutually actualize one another. (ii) Such actualization must occur in only one of the 2^N possible bases. (iii) Mutual actualization progressively breaks symmetry among the 2^N bases. (iv) An emerging “amplitude” for any basis can be amplified by further measurements in that basis, and it can decay between measurements. (v) The emergence of any basis is driven by mutual measurements among the N variables and decoherence with the environment. Quantum Zeno interactions among the N variables mediates the mutual measurements. (vi) As the number of variables, N, increases, the number of Quantum Zeno mediated measurements among the N variables increases. We note that decoherence alone does not yield a specific basis. (vii) Quantum ordered, quantum critical, and quantum chaotic peptides that decohere at nanosecond versus femtosecond time scales can be used as test objects. (viii) By varying the number of amino acids, N, and the use of quantum ordered, critical, or chaotic peptides, the ratio of decoherence to Quantum Zeno effects can be tuned. This enables new means to probe the emergence of one among a set of initially entangled bases via weak measurements after preparing the system in a mixed basis condition. (ix) Use of the three stable isotopes of carbon, oxygen, and nitrogen and the five stable isotopes of sulfur allows any ten atoms in the test protein to be discriminably labeled and the basis of emergence for those labeled atoms can be detected by weak measurements. We present an initial mathematical framework for this theory, and we propose experiments.     

精确确定光路中四分之一波片光轴方位的新方法

为了准确安装四分之一波片,介绍了一种精确确定光路中四分之一波片光轴方位的新方法,并利用米勒矩阵理论分析了影响测量结果的误差因素.测试方法所用的主要理论有米勒矩阵理论、傅里叶分析方法和最小二乘法.该方法利用最小二乘法得到了最优傅里叶系数,利用消光比测试原理实现了检偏棱镜的精确安装,利用反馈环控制系统对步进电机的步进角进行了控制.误差分析表明该方法的测量误差与四分之一波片光轴方位角本身的大小有关.实验结果表明该方法的标准不确定度为0.03.     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

利用手持技术数字化实验测定中和反应化学计量比*

化学计量比在中学教学及实际生产中有着重要应用,本研究针对化学计量比概念教学存在的不足,以手持技术TQVC概念认知模型为理论依据,设计实验测定中和反应的化学计量比。基于等摩尔连续变化法,本实验借助温度传感器测定不同物质的量之比反应物反应后的温度变化数据,找出最大温度变化差值对应的反应物物质的量之比,即化学计量比,帮助学生从定量的角度理解化学计量比概念。     

Isotopic Characterization of 100% Agave Tequila (Silver,Aged and Extra-Aged Class) for Its Use as an Additional Parameter in the Determination of the Authenticity of the Beverage Maturation Time

Isotopic ratios of δ¹³C_VPDB and δ¹⁸O_VSMOW have been used as an additional parameter to ensure the authenticity of the aging time of 100% agave tequila. For this purpose, 120 samples were isotopically analyzed (40 silver class, 40 aged class, and 40 extra-aged classes). The samples were obtained through a stratified sampling by proportional allocation, considering tequila producers from the main different regions of Jalisco, Mexico (Valles 41%, Altos Sur 31%, Cienega 16%, and Centro 12%). The results showed that the δ¹³C_VPDB was found in an average of −12.85 ‰ for all the analyzed beverages, with no significant difference between them. Since for all the tested samples the Agave tequilana Weber blue variety was used as source of sugar to obtain alcohol, those results were foreseeable, and confirm the origin of the sugar source. Instead, the results for δ¹⁸O_VSMOW showed a positive slope linear trend for the aging time (silver class 19.52‰, aged class 20.54‰, extra-aged class 21.45‰), which is associated with the maturation process, there are oxidation reactions that add congeneric compounds to the beverage, these can be used as tracers for the authenticity of the aging time. Additionally, the experimental data showed homogeneity in the beverages regardless of the production region, evidencing the tequila industry’s high-quality standards. However, a particular case occurs with the δ¹⁸O_VSMOW data for the silver class samples, in which a clear trend is noted with the altitude of the region of origin; therefore, this information suggests that this analytical parameter could be useful to authenticate the regional origin of beverage.