Deoxypegan-1-one derivatives. synthesis and borohydride reduction of 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones

3-[(E)-Arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolin-1(2H)-ones were prepared by reaction of quinazolyl-2-propionic acid hydrochloride with aromatic aldehydes in acetic anhydride in the presence of Et₃N. 3-[(E)-Arylmethylidene]-1,2,3,9-tetrahydropyrrolo[2,1-b]quinazolin-1-ols were formed by reduction of the 3-arylidene derivatives with sodium borohydride in methanol, readily lost water when heated with acids, and were converted into 3-[(E)-arylmethylidene]-3,9-dihydropyrrolo[2,1-b]quinazolines. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 463–467, September–October, 2006.     

大环酮的微生物还原

本文报道了细菌、放线菌和丝状真菌等11株对甾族化合物有脱氢或羟化能力的微生物,对环十四酮及其同系物的生物转化结果。层析纯产物经熔点、元素分析、气-液色谱、红外、核磁、质谱等鉴定,证明有半数菌部将大环酮还原为相应的大环醇,而未发现有α,β-脱氢产物。     

Electrodeposition of a cobalt-molybdenum alloy from an ammonia-citrate electrolyte

Kinetics of processes of electrochemical production of a cobalt-molybdenum alloy out of an ammonia-citrate electrolyte is studied. The electrolyte’s composition is similar to that used for depositing a nickel-molybdenum alloy. It is established that the cobalt-molybdenum alloy undergoes deposition at smaller values of pH (5.0–6.0) than the nickel-molybdenum alloy (7.0–9.0). The current efficiency for the cobalt-molybdenum alloy is substantially dependent on the electrolyte pH, whereas the chemical composition of the obtained deposits is practically independent of the electrolyte pH in the pH interval 5.0–8.0 at current densities of 0.025 to 0.100 A cm^?2. On the other hand, a change in the electrolyte pH produces a considerable effect on the morphology of the obtained deposits. At large values of pH (pH 8.0), one can obtain a powder-like deposit of the cobalt-molybdenum alloy with a small value of the current efficiency. The deposits that are obtained in the pH region 5.0–6.0 have some cracks, with the number of cracks increasing with the electrolyte pH.     

固体氧化物电解池直接电解CO2的研究进展

固体氧化物电解池是一种高效、环境友好型的能量转换器件,可以直接将电能转化为化学能. 本文介绍了近年来作者课题组在固体氧化物电解池直接用于CO₂还原的研究进展,并以阴极材料为主着重讨论了金属陶瓷电极和混合导电型钙钛矿氧化物电极的研究工作,最后展望了未来固体氧化物电解池直接电解CO₂的研究思路和方向.     

Formation of different products during photo-catalytic reaction on TiO<Subscript>2</Subscript> suspension in water with and without 2-propanol under diverse ambient conditions

Studies on photo-catalytic reduction of CO₂ using TiO₂ photo-catalyst (0.1%, w/v) as a suspension in water was carried out at 350 nm light. CO₂ from both commercially available source, as well as generated in situ through 2-propanol oxidation, was used for this study. The photolytic products such as hydrogen (H₂), carbon monoxide (CO) andmethane (CH₄) generated were monitored in TiO₂ suspended aqueous solution with and without a hole scavenger, viz., 2-propanol. Similar photolytic experiments were also carried out with varying ambient such as air, O₂, N₂ and N₂O. The yields of CO and CH₄ in all these systems under the present experimental conditions were found to be increasing with light exposure time. H₂ yield in N₂-purged systems containing 2-propanol was found to be more as compared to the without 2-propanol system. The rate of H₂ production in N₂-purged aqueous solutions containing 0.1% TiO₂ suspension were evaluated to be 0.226 and 5.8 μl/h, without and with 0.5 M 2-propanol, respectively. This confirmed that 2-propanol was an efficient hole scavenger and it scavenged photo-generated holes (h⁺), allowing its counter ion, viz., e⁻, to react with water molecule/H⁺ to yield more H₂. The formation of both CO and CH₄ in the photolysis of CO₂-purged aqueous solutions containing suspended TiO₂ in absence of 2-propanol reveal that the generation of CH₄ is taking place mainly through CO intermediate. In presence of air/O₂, the yield of H₂ in the system without 2-propanol was observed to be negligible as compared to the system containing 2-propanol in which low yield of H₂ was obtained with a formation rate of approx. 0.5 μl/h.     

Cathodic synthesis of esters of 1,1,2,2-cycloalkanetetracarboxylic acids derived from 1,1,2,2-ethane- or ethylenecarboxylate esters

The cathodic electrolysis of esters of 1,1,2,2-ethane- or ethylenetetracarboxylic acids in the presence of dihaloalkanes leads to esters of 1,1,2,2-cycloalkanetetracarboxylic acids.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 217–220, January, 1992.     

Copper‐Bismuth Bimetallic Microspheres for Selective Electrocatalytic Reduction of CO2 to Formate

Electrocatalytic carbon dioxide reduction holds great promise for reducing the atmospheric CO₂ level and alleviating the energy crisis. High‐performance electrocatalysts are often required in order to lower the high overpotential and expedite the sluggish reaction kinetics of CO₂ electroreduction. Copper is a promising candidate metal. However, it usually suffers from the issues of poor stability and low product selectivity. In this work, bimetallic Cu‐Bi is obtained by reducing the microspherical copper bismuthate (CuBi₂O₄) for selectively catalyzing the CO₂ reduction to formate (HCOO^–). The bimetallic Cu‐Bi electrocatalyst exhibits high activity and selectivity with the Faradic efficiency over 90% in a wide potential window. A maximum Faradaic efficiency of ~95% is obtained at –0.93 V versus reversible hydrogen electrode. Furthermore, the catalyst shows high stability over 6 h with Faradaic efficiency of ~95%. This study provides an important clue in designing new functional materials for CO₂ electroreduction with high activity and selectivity.     

1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐的合成

以1－甲基吡咯为原料，通过酰化、硝化、酯化、还原、成盐等五步反应，合 成得到1－甲基－2－甲氧羰基－4－氨基吡咯盐酸盐，总产率20％左右。该法具有 原料便宜易得、操作简单、产物易于分离提纯等优点，有利于该化合物的大量制备 和应用。     

碳热还原制备不同形貌的碳化硅纳米线

以酚醛树脂为碳源，正硅酸乙酯为硅源，硝酸镧和表面活性剂为调控剂，通过溶胶-凝胶和碳热还原反应制备了不同形貌的碳化硅纳米线。采用X射线衍射、扫描电子显微镜、透射电子显微镜和X射线散射能谱对所制备的碳化硅纳米线进行表征。结果表明，通过此方法所制备的碳化硅纳米线均为立方结构的β-SiC，分别具有直线状、竹节状和链珠状、分枝状等不同形貌。金属催化剂和表面活性剂对碳化硅纳米线的结构和形貌变化有重要影响。     

痕量砷流动注射在线还原氢化物发生原子吸收测定

方法采用流动注射停流技术使水及土壤浸出液中Ａｓ（Ｖ）在线还原为Ａｓ（Ⅲ），不经手工还原，用氢化物发生原子吸收光谱法直接测定砷的含量。含４ｍｏｌ／Ｌ ＨＣｌ的样品溶液与３０％碘化钾溶液在编结式反应器中混合，并在采样环中停流４０ｓ，达完全还原后注入到载流中与硼氢化钠反应，采样速度５５次／ｈ，检出限（３δ）０．１μｇ／Ｌ，对自来水和土壤浸出液的加标回收结果满意。