1/f Noise QWIPs and nBn detectors

The low-frequency noise is a ubiquitous phenomenon and the spectral power density of this fluctuation process is inversely proportional to the frequency of the signal. We have measured the 1/f noise of a 640 × 512 pixel quantum well infrared photodetector (QWIP) focal plane array (FPA) with 6.2 μm peak wavelength. Our experimental observations show that this QWIP FPA’s 1/f noise corner frequency is about 0.1 mHz. With this kind of low frequency stability, QWIPs could unveil a new class of infrared applications that have never been imagined before. Furthermore, we present the results from a similar 1/f noise measurement of bulk InAsSb absorber (lattice matched to GaSb substrate) nBn detector array with 4.0 μm cutoff wavelength.     

Experimental study of the cavitation noise and vibration induced by the choked flow in a Venturi reactor

In this paper, the cavitation performance and corresponding pressure pulsation, noise and vibration induced by the choked cavitating flow in a Venturi reactor are investigated experimentally under different cavitation conditions by using high-speed camera and high frequency sensors. Based on the instantaneous continuous cavitation images, the Proper Orthogonal Decomposition (POD), a tool to analyze the large-scale cavitation flow structure, is applied to investigate the choked cavitating flow dynamics. The POD results show that two mechanisms, re-entrant jet flow mechanism and shock wave mechanism, govern the shedding and collapse of cavitation cloud at different pressure ratios. These mechanisms contribute to the variation of pressure pulsation, noise and vibration at different pressure ratios. The pressure pulsation spectrum behaves differently in various cavitation regions induced by the choked cavitating flow. Due to the existence of low pressure in re-entrant region, the influence of high frequency fluctuation on pressure pulsation caused by re-entrant flow is small. Moreover, with the increase of pressure ratio, the induced noise and vibration intensity decreases gradually, then increases and reaches a maximum value. Finally, it drops to a low and stable level. Despite different inlet pressures, the intensity of cavitation noise and vibration reaches the maximum value at the same pressure ratio. Specifically, the FFT analysis of noise and vibration signals indicates that low frequency component prevails at small pressure ratio owing to the re-entrant jet mechanism, while high frequency component prevails at large pressure ratio owing to the shock wave mechanism. The relationship between the choked cavitation dynamics and the induced pressure pulsation, noise and vibration in the Venturi reactor is highlighted. The results can provide guidance for the optimal operation condition of the Venturi reactor for cavitation applications such as water treatment.     

结合幅度谱和功率谱字典的语音增强方法

从双路字典学习、噪声功率谱估计、语音幅度谱重构角度提出了一种改进的谱特征稀疏表示语音增强方法。在字典学习阶段,融合功率谱与幅度谱特征,采用区分性字典降低语音字典和噪声字典的相干性;在语音增强阶段,提出一种噪声功率谱估计方法对非平稳噪声进行跟踪估计;考虑到幅度谱和功率谱特征对不同噪声的适应程度不同,设计了语音重构权值表。对分别由幅度谱和功率谱恢复而来的两路信号进行自适应加权重构,结合相位补偿函数得到增强后的语音信号。实验结果表明,该方法在平稳、非平稳噪声环境下相比于单一谱特征的语音增强方法平均提高31.6%,改善了语音增强方法的性能。     

Optimizing the thulium doped fiber amplifier (TDFA) gain and noise figure for S-band 16 × 10 Gb/s WDM systems

This paper aims to evaluate a comprehensive numerical model based on solving rate equations of a thulium-doped silica-based fiber amplifier. The pump power and thulium-doped fiber (TDF) length for single-pass thulium-doped fiber amplifiers (TDFA) are theoretically optimized to achieve the optimum gain and noise figure (NF) at the center of S-band region. The 1064 nm pump is used to provide both ground-state and excited state absorptions for amplification in the S-band region. The theoretical result is in agreement with the published experimental result.     

Influence of the structure parameters on the gain and noise figure in silicon parametric amplifiers based on SOI Rib waveguides

Gain and Noise figure (NF) characteristics in dual-pump parametric amplifier based on silicon on insulator (SOI) Rib waveguides are numerically investigated in the presence of nonlinear losses. The impact of structure parameters of the silicon optical parametric amplifiers (SOPAs) on the gain and the NF are also analyzed. The results show that both the height and the width of the silicon on insulator (SOI) can affect the gain and the NF of SOPAs. 354 nm bandwidth (3 dB) and 8.135 maximum gain can be achieved by tailoring the structure parameters of the SOI rib waveguides. Moreover, the dispersion and the effective mode area of SOI are also analyzed.     

Construction of a photon drag detector for evaluating the performance of a CO2 laser amplifier

In this article, the construction of P-type germanium (Ge) photon drag detector which is used to characterize the gain and output powers of a 10 W CO₂ laser and a CO₂ laser amplifier is described. Gain and laser amplifier output power versus laser input power measurements collected at 4.7 mbar and 12.0 mbar amplifier tube pressures are discussed. Moreover, measurements relating the CO₂ laser output power to the laser tube discharge current are provided at 6.9 mbar and 7.3 mbar tube pressures.     

Approximate and Exact Small Signal Analysis for Single-Mode Fiber Near Zero Dispersion Wavelength with Higher Order Dispersion

This article presents the comparison of approximate and exact small-signal theories for analyzing the influence of the higher-order dispersion terms on dispersive optical communication systems operating near zero dispersion wavelength for linear single-mode fiber. For the approximate theory, the generalized conversion matrix has been reported and gives the transfer function of intensity and phase from the fiber input to fiber output for a laser source including the influence of any higher-order dispersion term. In addition, expressions for the small-signal frequency response and the relative intensity noise (RIN) response of an ultrafast laser diode including noises are derived. However, it is observed that the approximation assumed for the second-order dispersion term for the approximate analysis is not valid. From the approximate theory, the exact generalized conversion matrix and exact expressions for small-signal frequency response and relative intensity noise (RIN) are obtained. We show that for the exact theory, the second-order dispersion term has no effect on intensity and frequency response even at large modulating frequencies and large propagation distances contrary to the approximate theory as reported by other authors. But we show that third-order dispersion term certainly has some minute impact on the frequency and RIN response for long distance links at high modulating frequencies.     

双重瑞利散射导致的多路干涉噪声对光纤喇曼放大器噪声系数的影响

在没有对喇曼增益分布做任何假设的情况下,利用所推导的光纤喇曼放大器噪声系数的解析表达式,研究了不同光纤长度、不同信号输入功率、不同增益、不同瑞利散射下双重瑞利散射导致的多路干涉噪声对喇曼放大器噪声系数的影响.结果表明随着光纤长度,信号输入功率、喇曼增益和瑞利散射的增加,多路干涉噪声对噪声系数的劣化越严重.但通过合理的优化光纤长度、控制喇曼增益可以取得噪声和增益间的最佳平衡.     

Noisy scale-free networks

The impact of observational noise on the analysis of scale-free networks is studied. Various noise sources are modeled as random link removal, random link exchange and random link addition. Emphasis is on the resulting modifications for the node-degree distribution and for a functional ranking based on betweenness centrality. The implications for estimated gene-expressed networks for childhood acute lymphoblastic leukemia are discussed.     

降低轴流风机噪声的两种方法

本文对轴流风机的噪声源进行了理论和实验分析,对降低风机噪声的方法进行了总结。在此基础上,研究了降低风机噪声的两种新方法——叶片不等距分布方法和叶片穿孔方法。理论分析和实验结果表明,这两种方法为降低轴流风机噪声提供了新的途径。