掺Er及Yb-Er共掺Al2O3光波导放大器噪音特性的数值模拟

利用由速率方程、有限元场分布、传输方程构建的综合理论模型,数值求解了掺Er及Yb-Er共掺Al2O3光波导放大器的噪音系数和正反向自发辐射功率.结果表明,随波导长度的增加,当增益开始下降时,噪音系数显著增加.同时显示了抽运功率和掺杂浓度对噪音系数的影响,比较了两种掺杂放大器的噪音系数,Yb-Er共掺比只掺Er的约小0.8 dB.     

Effect of the Noise Correlation Time on the Stationary Current of Brownian Particle in a Spatially Symmetric Periodic Potential

We investigate the noise-induced transport of Brownian particle in a deterministic spatial symmetrical periodic potential driven by colored cross correlation between a multiplicative white noise and an additive white noise. We derive the general formula of the stationary current. Based on numerical computation, we found that directed motion of the Brownian particles can be induced by the correlation time τ of cross correlation between the multiplicative noise and the additive noise and the current reversal and the direction of the current is controlled by the τ.     

The influence of turbulence on noise propagation from a point source above a flat ground surface

The presence of turbulence in the atmosphere affects the interaction between an acoustic wave and the ground surface. The noise attenuation by the ground in the presence of atmospheric turbulence is smaller than in non-turbulent atmosphere.A simple engineering model of noise propagation above a flat ground surface, for stationary and moving point sources, has been proposed. The model takes into account the air absorption and ground effect in the presence of turbulence.As well as parameters for type of ground and air absorption, the model introduces two adjustable parameters which must be deduced from in situ measurements at two ranges or two heights. The model’s free parameters have been obtained as a function of the resultant sound speed gradient on the basis of the field measurements performed for a stationary noise source. Also, using field data for a vehicle moving at steady speeds up to 100 km/h, the model has been verified for a moving point source.     

Evolution of weak noise and regular waves on dissipative shock fronts described by the Burgers model

The interaction of weak noise and regular signals with a shock wave having a finite width is studied in the framework of the Burgers equation model. The temporal realization of the random process located behind the front approaches it at supersonic speed. In the process of moving to the front, the intensity of noise decreases and the correlation time increases. In the central region of the shock front, noise reveals non-trivial behaviour. For large acoustic Reynolds numbers the average intensity can increase and reach a maximum value at a definite distance. The behaviour of statistical characteristics is studied using linearized Burgers equation with variable coefficients reducible to an autonomous equation. This model allows one to take into account not only the finite width of the front, but the attenuation and diverse character of initial profiles and spectra as well. Analytical solutions of this equation are derived. Interaction of regular signals of complex shape with the front is studied by numerical methods. Some illustrative examples of ongoing processes are given. Among possible applications, the controlling the spectra of signals, in particular, noise suppression by irradiating it with shocks or sawtooth waves can be mentioned.     

乙醇含量拉曼光谱检测中噪声与背景同时消除方法研究

乙醇含量拉曼光谱检测中,拉曼光谱信号中的各种噪声及光谱荧光造成的基线漂移和样品池背景等,影响了校正模型的预测精度。利用总体平均经验模态分解,将光谱信号分解成若干无模态混叠的内在模式分量,根据排列熵的信号随机性检测判据判断出代表背景信息和噪声信息的内在模式分量,将其置零即可同时消除拉曼光谱中的噪声与背景。将总体平均经验模态分解与排列熵相结合的预处理方法应用于乙醇含量的拉曼光谱检测中,并与小波变换和平均平滑滤波做了对比。实验结果表明：应用总体平均经验模态分解与排列熵相结合的方法能够有效的同时消除乙醇含量拉曼光谱检测中的噪声和背景信息,提高校正模型的预测精度,且使用简便,无需参数设置,对乙醇含量拉曼光谱检测具有实用价值。     

1/f Noise QWIPs and nBn detectors

The low-frequency noise is a ubiquitous phenomenon and the spectral power density of this fluctuation process is inversely proportional to the frequency of the signal. We have measured the 1/f noise of a 640 × 512 pixel quantum well infrared photodetector (QWIP) focal plane array (FPA) with 6.2 μm peak wavelength. Our experimental observations show that this QWIP FPA’s 1/f noise corner frequency is about 0.1 mHz. With this kind of low frequency stability, QWIPs could unveil a new class of infrared applications that have never been imagined before. Furthermore, we present the results from a similar 1/f noise measurement of bulk InAsSb absorber (lattice matched to GaSb substrate) nBn detector array with 4.0 μm cutoff wavelength.     

Experimental study of the cavitation noise and vibration induced by the choked flow in a Venturi reactor

In this paper, the cavitation performance and corresponding pressure pulsation, noise and vibration induced by the choked cavitating flow in a Venturi reactor are investigated experimentally under different cavitation conditions by using high-speed camera and high frequency sensors. Based on the instantaneous continuous cavitation images, the Proper Orthogonal Decomposition (POD), a tool to analyze the large-scale cavitation flow structure, is applied to investigate the choked cavitating flow dynamics. The POD results show that two mechanisms, re-entrant jet flow mechanism and shock wave mechanism, govern the shedding and collapse of cavitation cloud at different pressure ratios. These mechanisms contribute to the variation of pressure pulsation, noise and vibration at different pressure ratios. The pressure pulsation spectrum behaves differently in various cavitation regions induced by the choked cavitating flow. Due to the existence of low pressure in re-entrant region, the influence of high frequency fluctuation on pressure pulsation caused by re-entrant flow is small. Moreover, with the increase of pressure ratio, the induced noise and vibration intensity decreases gradually, then increases and reaches a maximum value. Finally, it drops to a low and stable level. Despite different inlet pressures, the intensity of cavitation noise and vibration reaches the maximum value at the same pressure ratio. Specifically, the FFT analysis of noise and vibration signals indicates that low frequency component prevails at small pressure ratio owing to the re-entrant jet mechanism, while high frequency component prevails at large pressure ratio owing to the shock wave mechanism. The relationship between the choked cavitation dynamics and the induced pressure pulsation, noise and vibration in the Venturi reactor is highlighted. The results can provide guidance for the optimal operation condition of the Venturi reactor for cavitation applications such as water treatment.     

结合幅度谱和功率谱字典的语音增强方法

从双路字典学习、噪声功率谱估计、语音幅度谱重构角度提出了一种改进的谱特征稀疏表示语音增强方法。在字典学习阶段,融合功率谱与幅度谱特征,采用区分性字典降低语音字典和噪声字典的相干性;在语音增强阶段,提出一种噪声功率谱估计方法对非平稳噪声进行跟踪估计;考虑到幅度谱和功率谱特征对不同噪声的适应程度不同,设计了语音重构权值表。对分别由幅度谱和功率谱恢复而来的两路信号进行自适应加权重构,结合相位补偿函数得到增强后的语音信号。实验结果表明,该方法在平稳、非平稳噪声环境下相比于单一谱特征的语音增强方法平均提高31.6%,改善了语音增强方法的性能。     

Optimizing the thulium doped fiber amplifier (TDFA) gain and noise figure for S-band 16 × 10 Gb/s WDM systems

This paper aims to evaluate a comprehensive numerical model based on solving rate equations of a thulium-doped silica-based fiber amplifier. The pump power and thulium-doped fiber (TDF) length for single-pass thulium-doped fiber amplifiers (TDFA) are theoretically optimized to achieve the optimum gain and noise figure (NF) at the center of S-band region. The 1064 nm pump is used to provide both ground-state and excited state absorptions for amplification in the S-band region. The theoretical result is in agreement with the published experimental result.     

Influence of the structure parameters on the gain and noise figure in silicon parametric amplifiers based on SOI Rib waveguides

Gain and Noise figure (NF) characteristics in dual-pump parametric amplifier based on silicon on insulator (SOI) Rib waveguides are numerically investigated in the presence of nonlinear losses. The impact of structure parameters of the silicon optical parametric amplifiers (SOPAs) on the gain and the NF are also analyzed. The results show that both the height and the width of the silicon on insulator (SOI) can affect the gain and the NF of SOPAs. 354 nm bandwidth (3 dB) and 8.135 maximum gain can be achieved by tailoring the structure parameters of the SOI rib waveguides. Moreover, the dispersion and the effective mode area of SOI are also analyzed.