Synthese und Struktur hochfunktionalisierter 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaborole

Synthesis and Structure of Highly Functionalized 2, 3‐Dihydro‐1H‐1, 3, 2‐diazaboroles A series of differently substituted 2, 3‐dihydro‐1H‐1, 3, 2‐diazaboroles has been prepared by various methods. 1, 3‐Di‐tert‐butyl‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 7 ), 2‐isobutyl‐1, 3‐bis(1‐cyclohexylethyl)‐1H‐1, 3, 2‐diazaborole ( 8 ), 1, 3‐bis‐(1‐cyclohexylethyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2‐diazaborole ( 9 ) 1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐2‐trimethylsilylmethyl‐1H‐1, 3, 2diazaborole ( 10 ) and 2‐bromo‐1, 3‐bis(1‐methyl‐1‐phenyl‐propyl)‐1H‐1, 3, 2‐diazaborole ( 11 ) were formed by reaction of the corresponding 1, 4‐diazabutadienes with the boranes Me₃SiCH₂BBr₂, iBuBBr₂ and BBr₃ followed by reduction of the resulting borolium salts [R¹ = tBu, Me(cHex)CH, [Me(Et)Ph]C; R² = Me₃SiCH₂, iBu, Br] with sodium amalgam. Treatment of 11 and 12 with silver cyanide afforded the 2‐cyano‐1, 3, 2‐diazaboroles 13 and 14 . An alternative route to compound 8 is based on the alkylation of 2‐bromo‐1, 3, 2‐diazaborole 12 with isobutyllithium. Equimolar amounts of 13 and isobutyllithium give rise to the formation of 15 . The new compounds were characterized by ¹H‐, ¹³C‐, ¹¹B‐NMR, IR and mass spectra. The molecular structures of 7 and meso ‐10 were confirmed by x‐ray structural analysis.     

The Structure of Bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium in the Solid State and in Solution

The complex, bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium, Pd[(S)‐APCS]₂, 1 , was prepared by reaction of 2‐[(1S)‐(+)‐10‐camphorsulfonamino]‐6‐aminopyridine with PdCl₂ in THF. Complex 1 has been characterized by spectroscopic methods and its structure has been determined by X‐ray crystallography. Crystal data: space group C2, a= 16.082 (2), b = 17.104 (2), c = 13.051 (2)Å, β = 99.95 (1)°, V = 3535.9 (8) ų, Z = 2 with final residuals R1 = 0.0491 and wR2 = 0.0944. Two independent molecules, (S,S)‐Pd[(S)‐APCS]2, 1a , and (R,R)‐Pd[(S)‐APCS]2, 1b , were found in each asymmetric unit, which exchange to each other via a series of nitrogen inversion and C‐C bond rotation. The inversion energy (ΔGc₁^≠) and the energy barrier (δGc₂^≠) were 11.5 ± 0.1 Kcal mol^?1 at 246 K and 9.8 ± 0.1 Kcal mol^?1 at 199 K, respectively, calculated by dynamic NMR data.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Functional ligands and complexes for new structures, homogeneous catalysts and nanomaterials

In this account, we focus on results from our laboratory to illustrate recent developments in various fields of organometallic chemistry. Studies on hemilabile P,N donor ligands and on the ion-pair behaviour of cationic Pd(II) complexes have led to the full characterization of complexes with η¹-allyl ligands. This still rare bonding mode for the allyl ligand in palladium chemistry allows facile insertion of CO into the Pd-C σ-bond, in contrast to the situation in related η³-allyl Pd(II) complexes. In order to develop new homogeneous catalysts for the selective dimerization and oligomerization of ethylene, a range of Ni(II) complexes have been prepared with new chelating P,N ligands where P represents a phosphine, phosphinite or phosphonite donor group and N a pyridine or oxazoline moiety. Finally, we shall examine bottom-up approaches to the formation of new nanomaterials of magnetic or catalytic interest by covalent anchoring of metal complexes and clusters into mesoporous materials using functional phosphine or alkyne ligands containing an alkoxysilyl group.     

Flow-injection determination of inorganic forms of nitrogen by gas diffusion and conductimetry

A flow-injection—conductimetric method was applied to the determination of ammonia, nitrate and nitrite at concentrations down to 5, 20 and 20 ng ml^?1, respectively. Ammonia was determined by merging the injected sample with an alkaline solution (NaOHEDTA) and passing the mixture through a diffusion cell. The ammonia released was collected by a flowing stream of deionized water that passed through a conductance flow cell. Nitrate and nitrite concentrations were determined after reduction to ammonia in alkaline medium using a column filled with metallic zinc. The ammonia produced was then measured as described above. About 60 samples per hour can be processed with a relative standard deviation of about 1%. Satisfactory agreement was observed between results for ammonia in samples of natural water and nitrate in tap and mineral water determined by the proposed method and by standard spectrophotometric procedures. Speciation can be achieved by adding sulphanilic acid to remove nitrite from the sample and determining the ammonia without the use of the column.     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Comparison of octadecyl-bonded silica and styrene-divinylbenzene copolymer sorbents for trace enrichment purposes fundamental aspects II. Linear chromatographic behaviour of the extracting supports

Summary Two reversed-phase LC systems were investigated by frontal analysis for the determination of linear chromatographic conditions, as defined according to the isotherm concept. The Partisil ODS-3 bonded silica and the PRP-1 polystyrene-divinylbenzene resin were used as stationary phases together withtrans-2-hexen-al as test solute and methanol-water mixtures as mobile phases. Particular attention was paid to the respective influence of the two main parameters which may cause sorbent overloading, that is, the capacity factor (k′) and the solute concentration in the mobile phase (C_m). Provided that k′C_m≤10⁻² M, linear chromatographic behaviour was observed for both sorbents, the maximum capacities of which were found greater than 1mmolg⁻¹.     

Chitosan as a biosorbent for adsorption of iron (II) from fracking wastewater

In this work, porous chitosan (CS) was investigated as a biosorbent for the removal of iron (II) from the synthetic fracking wastewater. The underlying problem with the production water from fracking industries is that it contains iron (II) up to 55 mg/L, which needs to be eliminated. Porous CS had a specific surface area of 1.05 m²/g with the average pore diameter of 319 A, as determined by using Brunauer‐Emmett‐Teller surface area analysis. The kinetics, isotherms, and thermodynamic analysis confirm that the porous CS can be a potential candidate for iron (II) removal. Both the pseudo‐first‐order model and pseudo‐second‐order model have good fit on iron (II) adsorption with the porous CS. Kinetic studies revealed that the CS‐iron (II) adsorption system was controlled by intraparticle diffusion. The monolayer adsorption capacity of the porous CS from Langmuir model was found to be 51.81 mg/g. The experimental data were fitted against common adsorption isotherms and yielded excellent fits in the following order: Langmuir > Temkin > Freundlich > Dubinin‐Radushkevich isotherms. Thermodynamic studies revealed that the adsorption of iron (II) onto porous CS was feasible and spontaneous. The adsorption process is endothermic, and the entropy is the driving force.     

泥炭中全氮的测定

采用连续流动化学分析仪（Continuous Flow Analyzer,CFA）,对泥炭中的全氮进行分析.方法有良好的线性关系（r=0.9999）,回收率为99％-105％,测试速度是比色法测试速度的15-20倍,操作简便、准确度好,对氮化学研究有一定意义.     

Adsorption and Desorption of the Herbicide Thiazafluron as A Function of Soil Properties

Abstract

The effect of soil composition on the adsorption and desorption of the herbicide thiazafluron [1.3-dimethyl-1-(5-trifluoromethyl-1,2,3-thiadiazol-2-yl) urea] by 20 soil samples of 13 selected soil profiles of southern Spain has been studied. The adsorption curves conformed the Freundlich equation and the values of the constants, Kf and nf, ranged from 0.13 to 4.64 and from 0.14 to 1.30, respectively. The simple and multiple regression analysis between Kf and soil properties revealed soil clay content, illite content and CEC as fundamental factors determining thiazafluron adsorption by soils. Unlike other substituted ureas, non significant correlation was found with soil organic matter. Desorption of thiazafluron was hysteretic in all cases, showing and values much lower than those for adsorption. Desorption kinetic indicated that this hysteresis is essentially due to irreversible adsorption, although some degradation seems also to occur. The Freundlich desorption Kfd values were closely related to the same factors as Kf: clay and illite contents and also montmorillonite content, suggesting that most of the hysteresis was due to thiazafluron irreversibly bound to soil clay mineral components.