Using PDMS coated TFC-RO membranes for CO2/N2 gas separation: Experimental study,modeling and optimization

Thin film composite (TFC) reverse osmosis (RO) membranes are semipermeable membranes that are utilized in water purification or water desalination systems. Discarding these membranes after end-of-life leads to environmental problems. Reusing old TFC-RO membranes is one way to solve this problem. For this reason, in this study, used TFC-RO membranes were coated with polydimethylsiloxane (PDMS) for CO₂/N₂ gas separation application. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) was utilized to confirm the crosslinking of coated PDMS. The morphology of PDMS/TFC-RO membranes was characterized using scanning electron microscopy (SEM). The parameters that can affect performance of prepared membranes (N₂ permeance and CO₂/N₂ selectivity) are concentration of PDMS solution, coating time, solvent evaporation time and curing temperature and time. Given that the used membranes don't have uniform surfaces, the first step of this study was to investigate the effect of the above mentioned factors on virgin membranes using fractional factorial design (FFD) of experiments. The results obtained showed that PDMS concentration is the most significant factor that has a negative effect on N₂ permeance and positive effect on CO₂/N₂ selectivity. The reported CO₂/N₂ selectivity of PDMS membranes was 11–12, but this selectivity for prepared PDMS/TFC-RO membranes was in the range of 6.7–22.5. After determining optimum conditions, the gas separation performance of PDMS coated used TFC-RO membrane under these conditions was finally determined. The results showed that the used membranes had a better performance than virgin membranes.     

MnOx/SAPO-11催化剂的制备、表征及其低温NH3-SCR活性

分别采用浸渍法、柠檬酸络合法以及沉淀法在SAPO-11分子筛上负载MnO_x,制备了一系列MnO_x/SAPO-11催化剂。考察了催化剂的低温NH₃选择性催化还原(SCR) (NH₃-SCR) NO_x的性能。结果表明,沉淀法制备的负载量为20%(w)的MnO_x/SAPO-11催化剂表现出最优异的低温NH₃-SCR性能及N₂选择性。通过X射线衍射(XRD)、扫描电镜(SEM)、能量散射谱(EDS)、原子吸收光谱(AAS)、N₂吸附-脱附、X射线光电子能谱(XPS)、H₂程序升温还原(H₂-TPR)、NH₃程序升温脱附(NH₃-TPD)以及NO/O₂程序升温脱附-质谱(NO/O₂-TPD-MS)等多种表征手段对催化剂的结构及表面性质进行分析。表征结果显示,采用不同方法制备催化剂时,其表面MnO_x的存在形式和晶相结构不同。沉淀法制备的催化剂表面存在无定型态MnO_x以及MnO₂晶型,具有较大的介孔及外表面积、更多比例的Mn⁴⁺和化学吸附氧,同时表面存在对反应有利的中强酸以及强酸。因此,催化剂在低温SCR反应阶段能够生成重要中间产物NO₂,从而表现出最佳低温活性。同时,三种制备方法均能使MnO_x相对均匀分散在SAPO-11表面。SAPO-11对催化剂表面MnO_x物种的形成具有一定的影响,从而影响催化剂的酸性,拓宽了MnO_x的活性温度窗口,提高了催化剂的N₂选择性。     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Asymmetric synthesis of 1-substituted-1-(pyridin-2-yl)methylamines by diastereoselective reduction of enantiopure N-p-toluenesulfinyl ketimines

Reduction of enantiopure N-p-toluenesulfinyl ketimines derived from 2-pyridyl ketones affords N-p-toluenesulfinyl amines with good yields and diastereoselectivities.     

Determination of partition behavior of organic surrogates between paperboard packaging materials and air

The suitability of recycled paperboard packaging materials for direct food contact applications is a major area of investigation. Chemical contaminants (surrogates) partitioning between recycled paper packaging and foods may affect the safety and health of the consumer. The partition behavior of all possible organic compounds between cardboards and individual foodstuffs is difficult and too time consuming for being fully investigated. Therefore it may be more efficient to determine these partition coefficients indirectly through experimental determination of the partitioning behavior between cardboard samples and air. In this work, the behavior of organic pollutants present in a set of two paper and board samples intended to be in contact with foods was studied. Adsorption isotherms have been plotted and partition coefficients between paper and air have been calculated as a basis for the estimation of their migration potential into food. Values of partition coefficients (Kpaper/air) from 47 to 1207 were obtained at different temperatures. For the less volatile surrogates such as dibutyl phthalate and methyl stearate higher Kpaper/air values were obtained. The adsorption curves showed that the more volatile substances are partitioning mainly in air phase and increasing the temperature from 70 to 100 degrees C their concentrations in air (Cair) have almost doubled. The analysis of surrogates was performed with a method based on solvent extraction and gas chromatographic-flame ionization detection (GC-FID) quantification.     

ADSORPTION OF 4-METHYLANILINE IN AQUEOUS SOLUTION BY BENZOYL-CONTAINING POLYMERIC ADSORBENTS

New polymeric adsorbents (ZH-02, ZH-03) containing benzoyl group for adsorbing and removing 4-methylaniline from its aqueous solutions were prepared. Studies on the isotherms and the comparison of desorption conditions evidenced through the adsorption of 4-methylaniline in water onto ZH-02 and ZH-03, namely that there are chemisorption‘s transitions at a proper higher temperature. Mini-colunm adsorption studies of 4-methylaniline on XAD-4, ZH-02 and ZH-03 at 288 K show that the breakthrough capacities are 2.39, 2.99 and 3.19 mmol/g and the total capacities are 3.45, 3.92 and 4.35 mmol/g, respectively.     

Self-Diffusion Coefficients for Pure and Mixed Adsorbate Fluids in Narrow Pores

The equilibrium distribution and the concentration dependence of the local and average self-diffusion coefficients for pure fluid and binary mixture components in narrow slitlike pores were analyzed. The coefficients were calculated using the lattice gas model in the quasi-chemical approximation on the assumption of a spherical shape and approximately equal sizes of the components. For the pure adsorbate, these calculations were compared with molecular dynamics simulations. Both methods gave similar concentration profile changes and dynamic characteristics of interlayer particle redistributions in strong nonuniform adsorption fields for dense fluids. A satisfactory agreement was obtained for the temperature dependences of the self-diffusion coefficients along the pore axis. The influence of the molecule–wall potential and of intermolecular interaction were considered. The self-diffusion coefficients of the adsorbate were shown to strongly depend on the density of the mixture and the distance from pore walls.     

Consistency of surface mechanical properties of spread protein layers at the liquid–air interface at different spreading conditions

Π/A isotherms of spread β-lactoglobulin and β-casein at the air–water interface are measured under different spreading conditions. While the isotherms do not show drastic effects of the spreading concentration and the compression rate the interfacial shear rheological behaviour is significantly influenced. In particular, the shear viscosity of β-lactoglobulin layers depend directly on the spreading concentration. Significant viscosity increase is obtained at larger surface pressures when the spreading concentration is increased. In contrast the shear rheology of the spread β-casein layers can be normalised by plotting the viscosities as a function of the surface pressure Π. The different behaviour is discussed in terms of denaturation of the β-lactoglobulin during the monolayer formation process by adsorption from the spread thin protein solution layer.     

Sorptive potential of sunflower stem for Cr(III) ions from aqueous solutions and its kinetic and thermodynamic profile

The sorptive potential of sunflower stem (180-300 μm) for Cr(III) ions has been investigated in detail. The maximum sorption (≥85%) of Cr(III) ions (70.2 μM) has been accomplished using 30 mg of high density sunflower stem in 10 min from 0.001 M nitric and 0.0001 M hydrochloric acid solutions. The accumulation of Cr(III) ions on the sorbent follows Dubinin-Radushkevich (D-R), Freundlich and Langmuir isotherms. The isotherm yields D-R saturation capacity X_m = 1.60 ± 0.23 mmol g⁻¹, β = −0.00654 ± 0.00017 kJ² mol⁻², mean free energy E = 8.74 ± 0.12 kJ mol⁻¹, Freundlich sorption capacity K_F = 0.24 ± 0.11 mol g⁻¹, 1/n = 0.90 ± 0.04 and of Langmuir constant K_L = 6800 ± 600 dm³ mol⁻¹ and C_m = 120 ± 18 μmol g⁻¹. The variation of sorption with temperature (283-323 K) gives ΔH = −23.3 ± 0.8 kJ mol⁻¹, ΔS = −64.0 ± 2.7 J mol⁻¹ K⁻¹ and ΔG_298k = −4.04 ± 0.09 kJ mol⁻¹. The negative enthalpy and free energy envisage exothermic and spontaneous nature of sorption, respectively. Bisulphate, Fe(III), molybdate, citrate, Fe(II), Y(III) suppress the sorption significantly. The selectivity studies indicate that Cr(III), Eu(III) and Tb(III) ions can be separated from Tc(VII) and I(I). Sunflower stem can be used for the preconcentration and removal of Cr(III) ions from aqueous medium. This cheaper and novel sorbent has potential applications in analytical and environmental chemistry, in water decontamination, industrial waste treatment and in pollution abatement. A possible mechanism of biosorption of Cr(III) ions onto the sunflower stem has been proposed.     

Convergence of the density functional one-centre expansion for the molecular continuum: N2 and (CH3)3N

A large-scale one-centre expansion with a radial B-spline basis set is implemented for bound and continuum states. A Kohn-Sham hamiltonian is employed with Hartree and exchange-correlation potentials calculated from the SCF electron density taken from a previous LCAO calculation. An inverse iteration method is used to obtain the continuum wavefunction, from which the cross section and asymmetry parameter are calculated. The convergence with respect to angular momentum and cut-off radius is analysed for N₂. The relevance of multipolar contributions even at large distances is shown and suggestions for further improvements are given. In order to show that the present method is suitable to treat systems of moderate size, the (CH₃)₃N molecule has also been calculated and the results are compared with experiment. Received: 19 May 1998 / Accepted: 20 August 1998 / Published online: 7 December 1998