Reactive ion etching of FePt using inductively coupled plasma

We propose a reactive ion etching (RIE) process of an L1₀-FePt film which is expected as one of the promising materials for the perpendicular magnetic recording media. The etching was carried out using an inductively coupled plasma (ICP) RIE system and an etching gas combination of CH₄/O₂/NH₃ was employed. The L1₀-FePt films were deposited on (1 0 0)-oriented MgO substrates using a magnetron sputtering system. The etching masks of Ti were patterned on the FePt films lithographically. The etch rates of ∼16 and ∼0 nm/min were obtained for the FePt film and the Ti mask, respectively. The atomic force microscopy (AFM) analyses provided the average roughness (R_a) value of 0.95 nm for the etched FePt surface, that is, a very flat etched surface was obtained. Those results show that the highly selective RIE process of L1₀-FePt was successfully realized in the present study.     

Evolution of long-period stacking order (LPSO) in Mg97Zn1Gd2 cast alloys viewed by HAADF-STEM multi-scale electron tomography

We have studied three-dimensional (3D) structures and growth processes of 14H-type long-period stacking order (LPSO) formed in Mg₉₇Zn₁Gd₂ cast alloys by single tilt-axis electron tomography (ET) using high-angle annular dark-field scanning transmission electron microscopy. Evolution of the solute-enriched stacking faults (SFs) and the 14H LPSO by ageing were visualised in 3D with a high spatial resolution in multi-scale fields of views from a few nanometres to ~10 μm. Lateral growth of the solute-enriched SFs and the LPSO in the (0?0?0?1)_Mg plane is notable compared to the out-of-plane growth in the [0?0?0?1]_Mg direction. The 14H LPSO grows at the cost of decomposition of the (Mg, Zn)₃Gd-type precipitates, and accompany a change of in-plane edge angles from 30 to 60°. We have updated the Time–Temperature–Transformation diagram for precipitation in Mg₉₇Zn₁Gd₂ alloys: starting temperatures of both solute-enriched SFs and LPSO formation shifted to a shorter time side than those in the previous diagram.     

Microstructural evolution of AZ31 magnesium alloy subjected to sliding friction treatment

Microstructural evolution and grain refinement mechanism in AZ31 magnesium alloy subjected to sliding friction treatment were investigated by means of transmission electron microscopy. The process of grain refinement was found to involve the following stages: (I) coarse grains were divided into fine twin plates through mechanical twinning; then the twin plates were transformed to lamellae with the accumulation of residual dislocations at the twin boundaries; (II) the lamellae were separated into subgrains with increasing grain boundary misorientation and evolution of high angle boundaries into random boundaries by continuous dynamic recrystallisation (cDRX); (III) the formation of nanograins. The mechanisms for the final stage, the formation of nanograins, can be classified into three types: (i) cDRX; (ii) discontinuous dynamic recrystallisation (dDRX); (iii) a combined mechanism of prior shear-band and subsequent dDRX. Stored strain energy plays an important role in determining deformation mechanisms during plastic deformation.     

Characterisation of atomic-scale defects in ODS ferritic alloys by positron annihilation

The vacancy-type defects and their local chemical environment in different ODS alloys produced in the USA (14YWT), China (K5) and Russia (ODS EP-450) are studied. The Angular Correlation of Annihilation Radiation (ACAR), which is one of the positron annihilation spectroscopy method, was used. It was shown that in all alloys, except 14YWT, the dominant type of positron traps are vacancy-like defects, localised in matrix or associated with dislocations and/or interfaces of the incoherent particles. In the case of 14YWT alloy, which contains Y–Ti–O nanoclusters of a high density, the positrons confine and annihilate at O-vacancy pairs or complexes within nanoclusters. It is testified by enhanced electron density in annihilation sites and neighbourhood of Ti and Y atoms. These results, obtained by the ACAR method, indicate that the vacancies play an essential role in the formation of nanoclusters in ODS 14YWT alloy as it was theoretical predicted by first-principle calculations.     

Magnetocaloric properties in a FeNiGaMnSi high entropy alloy

We investigated a new Fe_26.7Ni_26.7Ga_15.6Mn₂₀Si₁₁ high entropy alloy (HEA) without the rare earth element. The structural, magnetic and magnetocaloric properties of the resulting materials are presented. The HEAs successfully is produced by the arc melting with suction casting method. The crystal structures are characterised through multiphase Rietveld refinement of X-ray diffraction data. The structure of the HEAs was found to be the body centred cubic (bcc). In the magnetic measurements, the ferromagnetic to paramagnetic transition was obtained in the range of 300–400 K. With the employed suction casting method; the Fe_26.7Ni_26.7Ga_15.6Mn₂₀Si₁₁ HEA shows the best magnetocaloric properties as 1.59 Jkg⁻¹K⁻¹ maximum magnetic entropy change (0–2 T) and 75.68 Jkg^-1 refrigeration capacity after the annealing process.     

The study of phase,microstructure, and magnetocaloric properties in LaFe11.6*xSi1.4B0.1 alloys

The effect of Fe on the phase and magnetocaloric property of LaFe_11.6*xSi_1.4B_0.1 alloys with x = 1.0–1.4 have been studied. The results show that the excess of Fe will make the α-Fe phases increase, but the easy corrosion LaFeSi phase reduces in LaFe_11.6*xSi_1.4B_0.1 alloys. All LaFe_11.6*xSi_1.4B_0.1 alloys keep the first-order magnetic phase transition. The saturation magnetizations of LaFe_11.6*xSi_1.4B_0.1 alloys with x > 1 are much higher than LaFe_11.6Si_1.4B_0.1 alloy under 2T magnetic field. This results in the maximum isothermal magnetic entropy changes, and the relative cooling power of LaFe_11.6*xSi_1.4B_0.1 alloys is bigger than for LaFe_11.6Si_1.4B_0.1 alloys.     

聚变堆液态包层提氚鼓泡器的概念设计

在气-液接触法提取液态锂合金中的氢的实验基础上,提出了以气-液交换柱为核心的提氚鼓泡器(LBTB)的概念设计。LBTB 主要由气体进样纯化器、气-液交换柱系统、饱和器－解吸器和辅助系统构成。LBTB以氩氢混合气为吹洗气,其主要功能是在线监测液态包层主回路中的氚行为,并检验多柱级联后的氚回收率是否可以达到90%的期望值。     

A scenario for the electronic state in the manganese perovskites: the orbital correlated metal

We propose a novel scenario for the electronic state in the manganese perovskites. We argue that, at low temperatures and within the ferromagnetic state, the physics of these colossal magnetoresistance compounds may be characterized by a correlated metallic state near a metal insulator transition where the orbital degrees of freedom play the main role. This follows from the observation that a two-band degenerate Hubbard model under a strong magnetic field can be mapped onto a para-orbital single band model. We solve the model numerically using the quantum Monte-Carlo technique within a dynamical mean field theory which is exact in the limit of large lattice connectivity. We argue that the proposed scenario may allow for the qualitative interpretation of a variety of experiments which were also observed in other (early) transition metal oxides. Received: 3 October 1997 / Revised: 9 December 1997 / Accepted: 12 January 1998     

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10⁻³ s⁻¹, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.