Rapid,General Synthesis of PdPt Bimetallic Alloy Nanosponges and Their Enhanced Catalytic Performance for Ethanol/Methanol Electrooxidation in an Alkaline Medium

We have demonstrated a rapid and general strategy to synthesize novel three‐dimensional PdPt bimetallic alloy nanosponges in the absence of a capping agent. Significantly, the as‐prepared PdPt bimetallic alloy nanosponges exhibited greatly enhanced activity and stability towards ethanol/methanol electrooxidation in an alkaline medium, which demonstrates the potential of applying these PdPt bimetallic alloy nanosponges as effective electrocatalysts for direct alcohol fuel cells. In addition, this simple method has also been applied for the synthesis of AuPt, AuPd bimetallic, and AuPtPd trimetallic alloy nanosponges. The as‐synthesized three‐dimensional bimetallic/trimetallic alloy nanosponges, because of their convenient preparation, well‐defined sponge‐like network, large‐scale production, and high electrocatalytic performance for ethanol/methanol electrooxidation, may find promising potential applications in various fields, such as formic acid oxidation or oxygen reduction reactions, electrochemical sensors, and hydrogen‐gas sensors.     

Underpotential Deposition‐Induced Synthesis of Composition‐Tunable Pt?Cu Nanocrystals and Their Catalytic Properties

Pt? Cu alloy octahedral nanocrystals (NCs) have been synthesized successfully by using N,N‐dimethylformamide as both the solvent and the reducing agent in the presence of cetyltrimethylammonium chloride. Cu underpotential deposition (UPD) is found to play a key role in the formation of the Pt? Cu alloy NCs. The composition in the Pt? Cu alloy can be tuned by adjusting the ratio of metal precursors in solution. However, the Cu content in the Pt? Cu alloy NCs cannot exceed 50 %. Due to the fact that Cu precursor cannot be reduced to metallic copper and the Cu content cannot exceed 50 %, we achieved the formation of the Pt? Cu alloy by using Cu UPD on the Pt surface. In addition, the catalytic activities of Pt? Cu alloy NCs with different composition were investigated in electrocatalytic oxidation of formic acid. The results reveal that the catalytic performance is strongly dependent on Pt? Cu alloy composition. The sample of Pt₅₀Cu₅₀ exhibits excellent activity in electrocatalytic oxidation of formic acid.     

Iron-Cobalt-Silica Aerogel Nanocomposite Materials

Iron-Cobalt-Silica nanocomposites were prepared in form of aerogels. X-ray diffraction, transmission electron microscopy and N₂ physisorption at 77 K were used to investigate the structure, size and dispersion of the nanocrystals and the porous structure in the aerogels and in the final composites. The variation of the supercritical drying conditions gives rise to differences in the morphological features of the aerogels. These differences influence the size of the cobalt oxide nanoparticles in the aerogels. On the other hand, after the reduction treatment the average size of the alloy nanoparticles is the same in all the aerogel nanocomposites. The effect of reduction temperature on alloy formation and particle size is also discussed.     

Thermal evolution of ferromagnetic metallic glasses

A traditional TG apparatus was modified by placing two permanent magnets producing a controlled magnetic field (TG(M): Magneto Thermogravimetry). This technique proved to be useful to study both structural relaxation and crystallisation of ferromagnetic metallic glasses. Results obtained for the amorphous alloys Fe₄₀Ni₄₀P₁₄B₆ and Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅, are reported in this paper. Structural relaxation can be evaluated by measuring changes in Curie temperature induced by thermal treatments. Crystallisation in TG(M) is detected through a change in the measured apparent mass (difference between the sample mass and magnetic force driving it upward). These results were confirmed by DSC analysis. Whether the obtained crystalline phase is ferromagnetic, it can be identified through its Curie temperature, measured by TG(M). In fact the value of 770°C measured as Curie temperature of crystallised Fe_62.5Co₆Ni_7.5Zr₆Nb₂Cu₁B₁₅led to conclude that the only ferromagnetic crystalline phase is a-Fe. These hypothesis was confirmed by XRD analysis, showing that the first crystallisation yields to a-Fe nanocrystals. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamics of liquid Fe-Si and Fe-Ge alloys

The enthalpies of mixing of liquid binary Fe-Ge (1765±5 K) and Fe-Si (1750±5 K) alloys were determined using a high-temperature isoperibolic calorimeter. The thermodynamic properties of Fe-Ge melts were also studied by electromotive force method in the temperature range of 1250-1580 K. The comparison of our measurement results with literature data has been performed. The extreme negative values of integral enthalpy of mixing and alternating-sign deviations from Raoult's low for germanium can be explained by the influence of binary clusters formation. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Oxidation of Heterogeneous Tl/Ni/P‐Alloys — Preparation and Crystal Structures of the Thallium Nickel Phosphates TlNi4(PO4)3, Tl4Ni7(PO4)6, and Tl2Ni4(P2O7)(PO4)2

Single crystals of the first anhydrous thallium nickel phosphates were prepared by reaction of heterogeneous Tl/Ni/P alloys with oxygen. TlNi₄(PO₄)₃ (pale‐yellow, orthorhombic, space group Cmc2₁, a = 6.441(2)Å, b = 16.410(4)Å, c = 9.624(2)Å, Z = 4) crystallizes with a structure closely related to that of NaNi₄(PO₄)₃. Tl₄Ni₇(PO₄)₆ (yellow‐brown, monoclinic, space group Cm, a = 10.711(1)Å, b = 14.275(2)Å, c = 6.688(2)Å, β = 103.50(2)°, Z = 8) is isotypic with Na₄Ni₇(PO₄)₆, and Tl₂Ni₄(P₂O₇)(PO₄)₂ (brown, monoclinic, space group C2/c, a = 10.389(2)Å, b = 13.888(16)Å, c = 18.198(3)Å, β = 103.1(2)°, Z = 8) adopts the K₂Ni₄(P₂O₇)(PO₄)₂ structure. Tl₂Ni₄(P₂O₇)(PO₄)₂ could also be prepared in nearly single phase form by reaction of Tl₂CO₃, NiO, and (NH₄)₂HPO₄.     

Analysis of nickel-niobium alloys by inductively coupled plasma optical emission spectrometry

Inductively coupled plasma optical emission spectrometry (ICP-OES) was applied to the analysis of major and minor elements of Ni-Nb alloys obtained by aluminothermic reduction process. Digestion of samples was made using a mixture of HF+HNO₃. Minor and trace elements were determined without matrix separation. The precision for all constituents was <3%. Recoveries for the analyte-spiked samples were 95%.     

Interactions of water and methanol with a mixture of copper and zinc metals: a theoretical <Emphasis Type="Italic">ab initio</Emphasis> study

Ab initio cluster quantum chemical calculations at the Hartree–Fock and second-order Møller–Plesset perturbation theory levels were carried out to mimic the interactions of water and methanol with a mixture of Cu and Zn metals. It was shown that both molecular and dissociative adsorption of methanol on a mixture of Cu and Zn metal catalyst are preferred over the corresponding adsorptions of water. Estimated transition-state structures for dissociation of methanol into CH·₃ and OH· lie about 9.0 and 22.0 kcal/mol higher compared to the dissociated (forward reaction) and molecular adsorption (reverse reaction) complexes, respectively. Based on distinct radicals' bond energies with the active sites of the catalyst considered, it is suggested that hydrogen molecules could be formed through a chain of homogeneous reactions of methyl radicals released into the gas phase with the water and/or methanol molecules.     

液体和非晶态NiAl3合金结构的从头算分子动力学模拟

应用从头算分子动力学方法模拟了液体以及淬冷形成的NiAl₃合金体系,得到了它们的对相关函数、结构因子、键对分析信息.结果分析表明,在淬冷条件下得到的体系呈现非晶态性质,且非晶态结构类似于液态NiAl₃合金的结构,可以用液体结构近似描述非晶态性质.还进行了电子结构分析,得到液体NiAl₃合金的电子态密度和电荷分布.在液体镍铝合金中,镍为电子受体,部分电子由铝向镍转移,支持了Candy等人的XPS实验结果.镍铝间强烈作用,形成带有弱共价键性质的金属键.镍在合金中相当分散,这能部分解释由淬冷形成的NiAl₃合金制得的骨架镍催化剂活性增强的原因.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.