Ag3[PMo12O40]: An efficient and green catalyst for the synthesis of highly functionalized pyran‐annulated heterocycles via multicomponent reaction

A facile, efficient and eco‐friendly catalytic protocol was developed for the synthesis of medicinally important pyran‐annulated heterocycles via multicomponent reaction (MCR). Cyclocondensation of differently substituted aromatic aldehydes, malononitrile/ethyl cyanoacetate and various β‐dicarbonyl compounds in the presence of Ag₃[PMo₁₂O₄₀]?nH₂O as heterogeneous catalyst, in EtOH–H₂O, afforded diverse pyran‐fused chromene analogues. The merits observed for this approach were it being conducted via MCR, using commercially available or easily accessible starting materials in the presence of a green and easily separable heterogeneous and reusable catalyst, and affording high yields of desired products in very short reaction times with high purity in one‐pot fashion, thus providing a superior alternative approach for the synthesis of pyran‐annulated heterocycles.     

Camouflaging Structural Diversity: Co‐crystallization of Two Different Nanoparticles Having Different Cores But the Same Shell

Two ligand‐protected nanoscale silver moieties, [Ag₄₆(SPhMe₂)₂₄(PPh₃)₈](NO₃)₂ and [Ag₄₀(SPhMe₂)₂₄(PPh₃)₈](NO₃)₂ (abbreviated as Ag₄₆ and Ag₄₀, respectively) with almost the same shell but different cores were synthesized simultaneously. As their external structures are identical, the clusters were not distinguishable and become co‐crystallized. The occupancy of each cluster was 50 %. The outer shell of both is composed of Ag₃₂S₂₄P₈, which is reminiscent of fullerenes, and it encapsulates a well‐studied core, Ag₁₄ and a completely new core, Ag₈, which correspond to a face‐centered cube and a simple cube, respectively, resulting in the Ag₄₆ and Ag₄₀ clusters. The presence of two entities (Ag₄₀ and Ag₄₆ clusters) in a single crystal and their molecular formulae were confirmed by detailed electrospray ionization mass spectrometry. The optical spectrum of the mixture showed unique features which were in good agreement with the results from time‐dependent density functional theory (TD‐DFT).     

硝酸银及其产物银对六角相液晶流变性影响

用偏光显微镜测定了硝酸银及其产物银对NP－10／水六角相区的影响，用动态 （应力和频率扫描）和稳态（蠕变－恢复）方法研究了硝酸银的加入和银的生成对 该体系粘弹性的影响。无机前驱物硝酸银和银的生成能使六角相区略缩，动态流变 实验表明，无机物引入纯六角相液晶体系中会使其抗剪切的能力降低，对相区两侧 影响与振荡所采用的频率有关。生成的银原子会在胶束表面聚集，增加了胶束内部 不同EO链之间的交联，造成松弛时间变长，粘弹性指数降低，稳态实验所得到的结 果与动态实验一致，并将粘性和弹性定量化。用弹簧－粘壶模型和液晶的空间构型 及作用力解释了实验结果。     

基体石墨的孔隙结构及其对单质Ag扩散的影响

高温气冷堆燃料元件的基体石墨是一种多孔复合材料,是燃料元件的主要组成部分,其结构影响燃料元件的性能和裂变产物在燃料元件中的扩散。 本文利用压汞法表征基体石墨的孔隙结构,并讨论了基体石墨制备工艺中最大压制压强与热处理过程对孔隙结构的影响。 结果表明,基体石墨大孔孔径分布为6001900 nm,高温热处理使基体石墨的总孔隙率、中值孔径、大孔孔容均减小;基体石墨热处理样品的大孔孔容随最大压制压强的增加而呈线性减少,热处理过程单质Ag在石墨基体中的扩散速度与大孔孔容变化具有正相关性。     

Chalcogenide based all-solid-state thin electroplated ion-selective membrane for Hg(II) flow-injection determinations

The response to Hg(II) of a thin all-solid-state Te-doped silver chalcogenide membrane, described by the general formula Ag₂ + δSe_{1 − x}Te_x, which has been electrochemically prepared following a previously proposed approach, has been investigated. The kinetics of formation of the membrane's secondary dynamic response to Hg(II) has been successfully combined with the precise timing and transient signal, typical for flow-injection (FI) measurements, in developing a sensitive and reliable mercury FI detector. Under optimized stream conditions it exhibits a linear Nernstian response, with a double slope of the calibration graph of 59 mV dec⁻¹, over the mercury(II) concentration range 10⁻⁶ − 10⁻³ M, the typical sample throughput amounting to about 70 samples per hour. The observed chemical amplification of the signal is due to the specificity of the processes dominating the initial step in formation of the steady-state signal of the membrane to mercury. The analytical performance of the Hg(II) FI detector, as regards sensitivity, reproducibility, selectivity and long-term stability has been thoroughly investigated. The exact procedure for membrane electrodeposition is given and the potential of the proposed approach as a cost-effective way for preparing chalcogenides of unique structure and properties has been outlined in the above context.     

联苯四甲酸及联吡啶构筑的一维链状银(Ⅰ)配合物的合成及晶体结构

采用水热法合成了一个新颖的配合物{[Ag(4,4′-bpy)][Ag2(H3btc)(H2btc)(4,4′-bpy)2].3H2O}n(1)(H4btc=联苯-2,2′,4,4′-四甲酸;4,4′-bpy=4,4′-联吡啶),并对其进行了元素分析、红外光谱和X射线单晶衍射测定。配合物1属于三斜晶系,空间群为P1,a=1.122 51(6)nm,b=1.554 01(8)nm,c=1.774 59(9)nm,β=91.641 0(10)°,V=2.830 8(3)nm3,Z=2,Dc=1.764 g.cm-3,μ=1.113 mm-1,F(000)=1 508,R1=0.045 0,wR2=0.086 2(I>2σ(I))。在1中,一维线性[Ag(4,4′-bpy)]+阳离子链包含在一维{[Ag2(H3btc)(H2btc)(4,4′-bpy)2]-阴离子双链与游离水分子通过分子间氢键组装成的三维超分子结构中。研究了配合物的热稳定性和电化学性质。     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。     

电沉积Al/Pb-Ag阳极在电积锌过程中的耐腐蚀性

采用电沉积的方法在甲基磺酸镀液中制备了一种新型的锌电积Al/Pb-0.23%Ag阳极。 腐蚀实验和电化学分析显示,Al/Pb-0.23％Ag阳极与传统Pb-0.25％Ag阳极相比,具有较低的腐蚀速率,较高的腐蚀电位和较低的腐蚀电流密度,较高的电催化活性;金相显微镜、扫描电子显微镜和X射线衍射分析显示,Al/Pb-0.23％Ag阳极的晶粒细小、致密,极化48 h后有PbSO4、α-PbO2和β-PbO2生成。     

BiFeO3空间选择性光化学还原Ag及光催化活性

采用溶胶-凝胶法和光还原沉积法制备出Ag改性的纳米BiFeO₃粒子,对复合材料进行了FESEM、XRD、XPS、FTIR、UV-Vis/DRS等分析和表征。考察了波长365nm以上的光照下,铁磁性材料的空间选择性光化学反应对复合材料的结构、形貌以及光谱性质的影响。以罗丹明B为模拟污染物,考察了纳米Ag-BiFeO₃粒子的可见光光催化活性以及稳定性。结果表明：通过光化学沉积,不仅增强了BiFeO₃在200~800nm光照下的响应,而且抑制了光腐蚀现象,提高了BiFeO₃的稳定性。在波长大于400nm的光照射12h后单纯纳米BiFeO₃粒子对罗丹明B脱色率约为74%,而Ag-BiFeO₃复合材料6h后约为90%,并且重复使用3次后光催化效果基本不变。     

纯水中检测汞离子与银离子的菲啰啉类荧光探针

合成了菲啰啉类化合物探针1,并通过核磁共振波谱(NMR)、质谱(MS)、红外光谱(IR)对其结构进行了表征。利用荧光发射光谱考察了探针1对Hg~(2+)及Ag~+的识别性能。结果表明,探针1在纯水介质中以荧光猝灭的方式识别Hg~(2+)和Ag~+,其结合比分别为1∶1和2∶1,检测的线性范围分别为9.0×10~(-7)～1.1×10~(-5)和8.0×10~(-7)～7.0×10~(-6) mol/L,相关系数(r~2)均大于0.99,检出限均低至10~(-8)mol/L。根据探针1识别前后荧光强度的剧烈变化,建立了裸眼检测Hg~(2+)和Ag~+的可视化分析方法。通过等温量热滴定与~1H NMR滴定考察了识别过程的热力学参数和作用机理。该研究对生物体及环境领域中Hg~(2+)和Ag~+的实时监测具有潜在的应用价值。