镍基甲烷化催化剂中的助剂作用 Ⅱ重稀土氧化物添加剂的结构效应和电子效应

应用ＢＥＴ、气相色谱、红外光谱、竞争加氢反应和ＸＰＳ等方法,在以前工作的基础上继续考察了Ｙ２Ｏ３、Ｓｍ２Ｏ３、Ｅｕ２Ｏ３、Ｇｄ２Ｏ３、Ｔｂ４Ｏ７、Ｄｙ２Ｏ３、Ｅｒ２Ｏ３、Ｔｍ２Ｏ３、Ｙｂ２Ｏ３作为添加剂,对镍在γ－Ａｌ２Ｏ３表面的分散度、甲烷化活性、ＣＯ在镍上的吸附态及表面镍原子的电子状态的影响．结果表明,稀土氧化物添加剂不仅明显地提高了金属镍的分散度和甲烷化活性,还直接地影响表面镍原子的电子状态．对不同稀土氧化物,这些效应各异．作者认为,利用稀土氧化物添加剂调节表面镍原子的电子状态,可能成为改进甲烷化催化剂活性的一个有效途径．     

Promotion Effects of Nickel Catalysts of Dry Reforming with Methane

The promotion effects of nickel catalyst of dry reforming with methane were extensively investigated by means of XRD, SEM, EDX, N₂‐adsorption and H₂‐adsorption. XRD characterization indicated that good dispersion of nickel oxide and MgO promoter is achieved over γ‐Al₂O₃ support. Addition of MgO promoter effectively retards the formation of NiAl₂O₄ phase. SEM and EDX analysis exhibited that the addition of rare‐earth metal oxide CeO₂ effectively promotes the Ni metal dispersion on the surface of the catalysts despite of undesirable self‐dispersion of CeO₂ promoter. Furthermore, the nickel component is gradually dispersed on the surface of the support following the exposure to reaction gas mixture for a period of time. The addition of MgO inhibited the self‐dispersion and promotion effect of CeO₂ on Ni dispersion on the catalysts. H₂ chemisorption revealed that the addition of the alkaline oxide MgO promoter significantly prohibits the metal dispersion on the catalyst. Inappropriate promoter addition can result in sharp decrease of the metal dispersion, N₂‐adsorption indicated that oxide promoter was mostly concentrated on the outer layer of the alumina support while the nickel metal was generally dispersed in the support pores. Addition of promoters contributed to more reduction in mesopore volume.     

Structural and electrochemical properties of high-capacity Ml-Mg-Ni-based hydrogen storage alloys

The Ml-Mg-Ni-based (Ml = La-rich mixed lanthanide) hydrogen storage alloy Ml_0.88Mg_0.12Ni_3.0-Mn_0.10Co_0.55Al_0.10 was prepared by inductive melting. The micro-structure was analyzed by XRD and SEM. The alloy consists mainly of CaCu₅-type phase, Ce₂Ni₇-type phase and Pr₅Co₁₉-type phase. The electrochemical measurements show that the maximum discharge capacity is 386 mAh/g, 16.3% higher than that of the commercial AB₅-type alloy (332 mAh/g). At discharge current density of 1 100 mA/g, high rate dischargeability is 62%, while that of the AB5-type alloy is only 45%. The discharge capacity decreases to 315 mAh/g after 300 charge/ discharge cycles, 81.5% of the maximum discharge capacity. __________ Translated from Journal of Xi’an Jiao Tong University, 2008, 42(3) (in Chinese)     

A simple method for fabrication of sole composition nickel hexacyanoferrate modified electrode and its application

Nickel hexacyanoferrate film modified gold electrode was prepared by a simple chemical deposition procedure from a fresh prepared solution containing ferricyanide, Ni²⁺, and sodium nitrate. The resultant films have solo composition and are significantly stable as compared to the electrochemically deposited NiHCF films. For different concentrations of Na⁺ in the solution, the formal potential values of NiHCF shift according to the Nernstian behavior with a slope of 48 mV in the range of 10⁻⁴ to 1.0 M. The NiHCF film was also used for the electrocatalytic oxidation of ascorbic acid. The anodic peak current observed in cyclic voltammetry increased with the ascorbic acid concentration. At a fixed potential under hydrodynamic conditions, the calibration plot was linear over the ascorbic acid concentration range 0.1-12 mM.     

生物质与煤混燃机理:固态沉积特性

为了解在1 200 ℃不同反应时间条件下宜阳煤与水稻秸秆混燃的沉积性质,以18 kW的沉降炉为实验平台,利用扫描电镜及能谱,X射线衍射和电子探针方法对混燃的沉积物进行研究。研究表明,不同的混合比例或者不同反应时间条件下,沉积物中的Si、Al和Ca元素变化不大;表面的钾长石的黏性使沉积物更容易富集,而沉积物内部钾长石使沉积物的结构更加稳定;铝硅酸盐和Fe元素在沉积过程中都起了重要的作用。     

Temperature-response polymer coating for in-tube solid-phase microextraction coupled to high-performance liquid chromatography

The silica nanoparticle (SiO₂ NP)-deposited capillary fabricated by liquid phase deposition (LPD) was bonded by 3-(triethoxysilyl) propyl methacrylate and then modified with poly(N-isopropylacrylamide) (PNIPAAm) by polymerization. The resulting PNIPAAm modified SiO₂ NP-deposited capillary was applied to in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). To investigate the extraction performance of the prepared capillary, diethylstilbestrol (DES) with moderate polarity was selected as the model analyte. Results demonstrate that PNIPAAm modified SiO₂ NP-deposited capillary exhibited obvious temperature responsive character. Finally, the PNIPAAm modified SiO₂ NP-deposited capillary was applied to the analysis of three synthetical estrogens from milk samples. The detection limit of the method was found to be in the range 1.2-2.2 ng/g, and recovery was 71.7-98.9% with relative standard deviations in the range of 2.8-12.6%.     

硅电极/溶液界面开路电位-时间谱和原子力显微镜在化学镀Ag中的应用研究

用开路电位-时间谱技术,表征了在硅（100）表面化学镀银的硅电极/溶液界 面吸附态。所得结果与原子力显微镜在纳米尺寸上的面结构信息分析结果作了对比 。同时也将该结果与循环伏安法（CV）结果作了比较。证明当硅电极表面具有单层 吸附Ag~+离子、表面单层吸附Ag~+离子发生沉积反应、Ag~+离子发生本体沉积时的 开路电位-时间曲线有完全不同的特征。     

EXAFS研究Ni-B和Ni-Ce-B超细非晶态合金的退火晶化

采用同步辐射EXAFS技术定量地研究化学还原法制备的Ni-B和Ni-Ce-B超细非晶态合金中Ni原子的局域环境结构随退火温度升高而产生的变化,结果表明,对于Ni-B和Ni-Ce-B超细非晶态合金初始样品：Ni-Ni最邻近配位壳层的平均键长RNi-Ni、配位数N、热无序σT、结构无序σs分别为0．275nm,11.9.0.0069nm,0.034nm;0.276nm,12.4,0.0067nm,0.035nm,Ni-B最邻近配位壳层的RNi-B,N, σT,σs分别为0．215nm,2.7,0.0055nm,0.0048nm;0.214nm,2.0,0.0058nm,0.0042nm,Ni-Ni配位的σs很大,是其σT的4－5倍,比Ni－B配位的σs大近一个数量级,在300℃退火后,Ni－B样品开始发生晶化生成晶态Ni3B,其RNi-Ni和σs分别为0．254nm和0．011nm,σs降低近2倍;而．3％原子比的Ce掺入后使Ni-Ce-B超细非晶态合金的晶化温度升高100℃左右。在500℃退火后,Ni－B样品的结构参数与Ni箔的相近,但Ni-Ce-B样品中的Ni-Ni配位的σs仍为0．0073nm,Ni-B配位的N为1．2,表明稀土元素Ce（以CeO2)显著增强了Ni与B的相互作用,且同时使退火晶化成的Ni晶结构产生畸变。