Steroid polyols from the Far-Eastern starfish Henricia sanguinolenta

A new polyhydroxylated steroid (20R,24S)-5-cholestane-3,6,15,24-tetraol and a known glycoside, laeviuscoloside G, was isolated from the Far-Eastern starfish Henricia sanguinolenta, collected in the sea of Okhotsk, and characterized.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Darstellung und Kristallstruktur von Cadmiumazid Cd(N3)2

Preparation and Crystal Structure of Cadmium Azide Cd(N₃)₂ Solvent free, binary cadmium azide was synthesized by the reaction of cadmium carbonate and a 24 weight% solution of HN₃ in water. Cadmium azide is a colorless, crystalline powder which is highly sensitive to percussion and heat. Caution, the manipulation of Cd(N₃)₂ is very dangerous! The crystal structure was solved by single‐crystal methods and the phase purity was verified by a Rietveld refinement (Cd(N₃)₂, Pbca, no. 61; a = 7.820(2), b = 6.440(2), c = 16.073(3) Å; Z = 8, 1174 independent reflections, 64 parameters, R1 = 0.022). Cadmium azide crystallizes in a new structure type. In the crystal there are edge‐sharing Cd₂(N₃)₁₀ double octahedrons which are further connected to other units by azide bridges. Vibrational spectroscopic investigations (Raman an IR) are discussed with respect to the crystal structure data.     

Validation of a direct non-destructive quantitative analysis of amiodarone hydrochloride in Angoron formulations using FT-Raman spectroscopy

Raman spectroscopy was applied for the direct non-destructive analysis of amiodarone hydrochloride (ADH), the active ingredient of the liquid formulation Angoron^®. The FT-Raman spectra were obtained through the un-broken as-received ampoules of Angoron^®. Using the most intense vibration of the active pharmaceutical ingredient (API) at 1568 cm⁻¹, a calibration model, based on solutions with known concentrations, was developed. The model was applied to the Raman spectra recorded from three as-purchased commercial formulations of Angoron^® having nominal strength of 50 mg ml⁻¹ ADH. The average value of the API in these samples was found to be 48.56 ± 0.64 mg ml⁻¹ while the detection limit of the proposed technique was found to be 2.11 mg ml⁻¹. The results were compared to those obtained from the application of HPLC using the methodology described in the European Pharmacopoeia and found to be in excellent agreement. The proposed analytical methodology was also validated by evaluating the linearity of the calibration line as well as its accuracy and precision. The main advantage of Raman spectroscopy over HPLC method during routine analysis is that it is considerably faster and no solvent consuming. Furthermore, Raman spectroscopy is non-destructive for the sample. However, the detection limit for Raman spectroscopy is much higher than the corresponding for the HPLC methodology.     

Studies of the electrochemical behavior of epinephrine at a homocysteine self-assembled electrode

The self-assembled electrode with the homocysteine monolayer (Hcy/Au) has been characterized by infrared spectroscopy and ac impedance spectroscopy in electrolyte. The Hcy/Au electrode is demonstrated to promote the electrochemical response of epinephrine (E) by cyclic voltammetry. A pair of well-defined redox waves was obtained and the calculated standard rate constant (k_s) is 2.1×10⁻² cm s⁻¹ at the self-assembled electrode. The reduction peak of E can be used to determine the concentration of E in presence of ascorbic acid (AA) owing to the Hcy/Au also promoting the electrochemical oxidation of AA.     

Heavy metal phosphate nanophases in silica: influence of radiolysis probed via f-electron state properties

We have assessed the feasibility of carrying out time- and wavelength-resolved laser-induced fluorescence measurements of radiation damage in glassy silica. The consequences of alpha decay of Es-253 in LaPO₄ nanophases embedded in silica were probed based on excitation of 5f states of Cm³⁺, Bk³⁺, and Es³⁺ ions. The recorded emission spectra and luminescence decays showed that alpha decay of Es-253 ejected Bk-249 decay daughter ions into the surrounding silica and created radiation damage within the LaPO₄ nanophases. This conclusion is consistent with predictions of an ion transport code commonly used to model ion implantation. Luminescence from the ⁶D_7/2 state of Cm³⁺was used as an internal standard. Ion-ion energy transfer dominated the dynamics of the observed emitting 5f states and strongly influenced the intensity of observed spectra. In appropriate sample materials, laser-induced fluorescence provides a powerful method for fundamental investigation of alpha-induced radiation damage in silica.     

Stabilisation of ultra-high molecular weight polyethylene with Vitamin E

Ultra-high molecular weight polyethylene (UHMWPE) has been the material of choice for load-bearing articular components used in total joint arthroplasty in the past 30 years. However, the durability of the whole implant has often been compromised by oxidation of UHMWPE components. Since the use of a suitable, biocompatible stabilizer would minimize this inconvenience, the possibility of adding synthetic Vitamin E to medical grade UHMWPE is currently under investigation.In the present work, medical grade UHMWPE was blended with 0.05, 0.1 or 0.5 w/w% of α-tocopherol and consolidated by compression moulding. Small blocks of reference UHMWPE and of each blend were then gamma irradiated to 30 or 100 kGy. FTIR spectroscopy was used to monitor changes in both the polymer and the additive. Thin sections of virgin and α-tocopherol doped UHMWPE irradiated and unirradiated were aged in a ventilated oven at 90 °C and the kinetic of oxidation was followed by FTIR. In addition, CL-imaging curves were recorded at 180 °C on both irradiated and unirradiated samples.Phenol loss is observed in all the α-tocopherol doped samples upon irradiation. Hypotheses on the rearrangements of the additive structure include the formation of quinonoid products. Nevertheless, all the additive-containing samples exhibit better oxidation resistance compared to the virgin material, indicating stabilizing activity of the α-tocopherol derivatives.     

Systematics of f-element crystal-field interaction

Systematic behaviors of free-ion and crystal-field interactions are elucidated as a function of N, the number of f electrons in a lanthanide or actinide ion. Experimentally determined values of the free-ion interaction parameters are compared with those calculated based on Hartree-Fock theory. Comparison is also made between the lanthanide series in 4f^N configurations and the actinide series in 5f^N configurations. Variation in intra-ionic electrostatic interaction, spin-orbit coupling, and ion-ligand interaction is analyzed in comparison between the iso-f-electron lanthanide and actinide ions. Based on an exchange-charge model of crystal-field theory, crystal-field parameters of the f-element ions in various crystals are summarized in terms of point charge contribution and covalence effect. A systematic correlation is found between the free-ion parameters and the crystal-field strength. Increase of the crystal-field interaction results in a reduction in the free-ion parameters.     

Characteristic features of intra- and intermolecular interactions in crystals of pyrrole-2-carbaldehyde isonicotinoylhydrazone and its hydrate

Pyrrole-2-carbaldehyde isonicotinoylhydrazone (1) and its hydrate [1·H₂O] (2) were studied by single-crystal X-ray diffraction analysis. The introduction of the pyrrole substituent into N"-substituted isonicotinic hydrazide (INH) causes the intramolecular redistribution of the electron density compared to those in INHs studied earlier, which increases the basicity of the hydrazone nitrogen atom (N") involved in intermolecular hydrogen bonding. This effect has not been observed in the structures of N"-substituted INHs and benzhydrazides studied previously. Intermolecular hydrogen bonds play a decisive role in the formation of the crystal structures of 1 and 2.